Tadele Assefa Aragaw1, Bassazin Ayalew Mekonnen1,2. 1. Faculty of Chemical and Food Engineering, Bahir Dar Institute of Technology-Bahir Dar University, Bahir Dar, Ethiopia. 2. Bahir Dar Energy Center, Bahir Dar Institute of Technology-Bahir Dar University, Bahir Dar, Ethiopia.
Abstract
BACKGROUND: The extensive use and production of PPE, and disposal in the COVID-19 pandemic increases the plastic wastes arise environmental threats. Roughly, 129 billion face masks and 65 billion plastic gloves every month are used and disposed of on the globe. The study aims to identify the polymer type of face masks and gloves and sustainable plastic waste management options. RESULTS: The identification of polymers, which can help for fuel conversion alternatives, was confirmed by FTIR and TGA/DTA analysis and confirms that the polymeric categories fit for the intended purpose. Moreover, the handling technique for upcycling and the environmental impacts of the medical face mask and glove were discussed. The FTIR result revealed that face masks and gloves are polypropylene and PVC thermoplastic polymer, respectively and they can be easily transformed to fuel energy via pyrolysis. The endothermic peaks around 431 ℃ for medical glove and 175 ℃ for surgical is observed tells that the melting point of the PVC and polypropylene of plastic polymers, respectively. The pyrolysis of the face mask and glove was carried out in a closed reactor at 400 ℃ for 1 h. Conferring to lab-scale processes, liquid, and wax fuel rate of 75%, char of 10%, and the rest non-condensable gases were estimated at the end. CONCLUSIONS: It can be concluded that the medical plastics can be recycled into oil due to their thermoplastics nature having high oil content and the waste to energy conversion can potentially reduce the volume of PPE plastic wastes.
BACKGROUND: The extensive use and production of PPE, and disposal in the COVID-19 pandemic increases the plastic wastes arise environmental threats. Roughly, 129 billion face masks and 65 billion plastic gloves every month are used and disposed of on the globe. The study aims to identify the polymer type of face masks and gloves and sustainable plastic waste management options. RESULTS: The identification of polymers, which can help for fuel conversion alternatives, was confirmed by FTIR and TGA/DTA analysis and confirms that the polymeric categories fit for the intended purpose. Moreover, the handling technique for upcycling and the environmental impacts of the medical face mask and glove were discussed. The FTIR result revealed that face masks and gloves are polypropylene and PVC thermoplastic polymer, respectively and they can be easily transformed to fuel energy via pyrolysis. The endothermic peaks around 431 ℃ for medical glove and 175 ℃ for surgical is observed tells that the melting point of the PVC and polypropylene of plastic polymers, respectively. The pyrolysis of the face mask and glove was carried out in a closed reactor at 400 ℃ for 1 h. Conferring to lab-scale processes, liquid, and wax fuel rate of 75%, char of 10%, and the rest non-condensable gases were estimated at the end. CONCLUSIONS: It can be concluded that the medical plastics can be recycled into oil due to their thermoplastics nature having high oil content and the waste to energy conversion can potentially reduce the volume of PPE plastic wastes.
Authors: Joana C Prata; Ana L P Silva; Tony R Walker; Armando C Duarte; Teresa Rocha-Santos Journal: Environ Sci Technol Date: 2020-06-25 Impact factor: 9.028
Authors: Ana L Patrício Silva; Joana C Prata; Tony R Walker; Diana Campos; Armando C Duarte; Amadeu M V M Soares; Damià Barcelò; Teresa Rocha-Santos Journal: Sci Total Environ Date: 2020-06-30 Impact factor: 10.753
Authors: Tanya Purwar; Helber Antonio Esquivel-Puentes; Venkatesh Pulletikurthi; Xing Li; Ali Doosttalab; Clarice E Nelson; Rita E Appiah; Ernest R Blatchley; Victor Castano; Luciano Castillo Journal: Sci Rep Date: 2022-06-01 Impact factor: 4.996
Authors: Gabriel E De-la-Torre; Md Refat Jahan Rakib; Carlos Ivan Pizarro-Ortega; Diana Carolina Dioses-Salinas Journal: Sci Total Environ Date: 2021-02-11 Impact factor: 7.963
Authors: Mohamed Ben Haddad; Gabriel E De-la-Torre; Mohamed Rida Abelouah; Sara Hajji; Aicha Ait Alla Journal: Sci Total Environ Date: 2021-07-27 Impact factor: 10.753