| Literature DB >> 34644144 |
Scott Weichenthal1,2, Eric Lavigne2,3, Alison Traub4, Dana Umbrio4, Hongyu You2, Krystal Pollitt5, Tim Shin2, Ryan Kulka2, Dave M Stieb6, Jill Korsiak1, Barry Jessiman2, Jeff R Brook7, Marianne Hatzopoulou8, Greg Evans4, Richard T Burnett6.
Abstract
BACKGROUND: We do not currently understand how spatiotemporal variations in the composition of fine particulate air pollution [fine particulate matter with aerodynamic diameter ≤2.5μm (PM2.5)] affects population health risks. However, recent evidence suggests that joint concentrations of transition metals and sulfate may influence the oxidative potential (OP) of PM2.5 and associated health impacts.Entities:
Mesh:
Substances:
Year: 2021 PMID: 34644144 PMCID: PMC8513754 DOI: 10.1289/EHP9449
Source DB: PubMed Journal: Environ Health Perspect ISSN: 0091-6765 Impact factor: 9.031
Figure 1.Locations of monitoring sites for components and oxidative potential across Canada (2016–2017).
Descriptive statistics for daily data used in case-crossover analyses and monthly estimates of (micrograms per cubic meter), oxidative potential [glutathione (), ascorbate (), and dithiothreitol-related oxidative potential ()], and components (Canada, 2016–2017).
| Pollutant/component | Mean | SD | 5th | 25th | 50th | 75th | 95th |
|---|---|---|---|---|---|---|---|
| Daily air pollutants and temperature | |||||||
| | 7.25 | 6.86 | 1.79 | 3.83 | 5.87 | 8.83 | 16.5 |
| | 23.1 | 8.37 | 9.70 | 17.4 | 22.8 | 28.9 | 36.9 |
| | 8.54 | 5.85 | 2.00 | 4.46 | 7.17 | 11.0 | 20.0 |
| | 18.2 | 5.03 | 10.3 | 14.7 | 17.9 | 21.6 | 26.6 |
| Temperature (°C) | 7.68 | 11.2 |
| 0.0404 | 9.14 | 16.9 | 22.4 |
| Monthly average components | |||||||
| | 7.67 | 5.47 | 3.27 | 5.17 | 6.82 | 9.08 | 14.3 |
| OP ( | |||||||
| | 3.45 | 1.98 | 1.03 | 2.09 | 3.09 | 4.35 | 7.62 |
| | 2.91 | 0.91 | 1.46 | 2.29 | 2.79 | 3.50 | 4.67 |
| | 11.9 | 7.46 | 2.12 | 6.05 | 10.2 | 16.6 | 26.5 |
| Elements ( | |||||||
| S | 261 | 139 | 97.6 | 162 | 242 | 314 | 520 |
| Cu | 3.18 | 3.08 | 0.501 | 1.06 | 1.95 | 4.28 | 9.00 |
| Fe | 93.7 | 61.1 | 20.6 | 43.3 | 83.4 | 130 | 205 |
| Ni | 0.460 | 0.81 | 0.0554 | 0.121 | 0.207 | 0.419 | 2.12 |
| Mn | 3.26 | 2.67 | 0.555 | 1.34 | 2.82 | 4.19 | 7.52 |
| Zn | 12.4 | 13.3 | 1.99 | 3.93 | 6.83 | 15.6 | 39.4 |
Note: Cu, copper; Fe, iron; Mn, manganese; Ni, nickel; OP, oxidative potential; , ascorbate; , dithiothreitol; , glutathione; ppb, parts per billion; S, sulfur; SD, standard deviation; Zn, zinc.
Figure 2.Spearman correlations between monthly mean oxidative potential [glutathione (), dithiothreitol (), and ascorbate () depletion (pmol/min/μg)] and transition metal concentrations (Canada, 2016–2017) [copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), and zinc (Zn) in nanograms per cubic meter] at high () (A) and low () (B) sulfur (S) concentrations.
Figure 3.Relationships between glutathione-related oxidative potential [ (picomoles per minute per microgram)] and mass proportions (percent) of iron (Fe) (A), copper (Cu) (B), zinc (Zn) (C), and sulfur (S) in when the mass proportion of S is above the median (Canada, 2016–2017). Plots for ascorbate-related oxidative potential () are shown in panels (D), (E), and (F).
Figure 4.Variations in the strength of associations between lag-0 (per ) and acute cardiovascular events among men across categories of mass proportions of sulfur (S) and copper (Cu) (A) and (B), iron (Fe) (C) and (D), and zinc (Zn) (E) and (F) in . All conditional logistic regression models are adjusted for lag-0 mean temperature and . High and Low refer to mass proportions above () and below () median values. See Table S4 for corresponding numeric data.
Figure 5.Variations in the strength of associations between lag-0 (per ) and acute cardiovascular events among men across categories of mass proportions of sulfur (S) in and glutathione () (A) and (B), dithiothreitol () (C) and (D), and ascorbate-related oxidative potential () (E) and (F) (Canada, 2016–2017). All conditional logistic regression models are adjusted for lag-0 mean temperature and . High and Low refer to values above () and below () median values. See Table S4 for corresponding numeric data.
Figure 6.Generalized additive model plots for the mass proportion (percent) of sulfur (S), iron (Fe) (A), copper (Cu) (B), and (Canada, 2016–2017). mass concentrations (micrograms per cubic meter) are plotted up to the 99th percentile of monthly measurements.