| Literature DB >> 34584926 |
Stephan Regenbogen1, Markus Beck1, Michael Lang1, Markus A Küper2, Fabian M Stuby1, Alexander Trulson1.
Abstract
INTRODUCTION: The approach-related morbidity rate in the care of pelvic fractures is still high. Endoscopic procedures are known to significantly reduce access-related complications. Recently, a new endoscopically assisted implantation technique for plate osteosynthesis on the anterior pelvic ring has been described as the "Endoscopic Approach to the Symphysis". CASE REPORT: We present a case of a 29-year old male with a pelvic injury (AO type 61B2.3a) initially treated with a supraacetabular external fixator. After one week the definitive stabilization was performed by an endoscopically assisted symphyseal plating as well as a percutaneous iliosacral screw on the right side. One year after primary surgery, we performed an endoscopically assisted removal of the symphyseal plate using standard laparoscopic instruments.Entities:
Keywords: EASY; Endoscopic; Minimally-invasive; Open book injury; Rupture of symphysis
Year: 2021 PMID: 34584926 PMCID: PMC8450239 DOI: 10.1016/j.tcr.2021.100536
Source DB: PubMed Journal: Trauma Case Rep ISSN: 2352-6440
Fig. 1Initial (A) X-ray and (B) CT scan of the pelvic injury. It shows an open book injury with a rupture of the symphysis, fracture of the inferior and superior pubic ramus and minor dislocation in the sacroiliac joint (arrows) AO type 61B2.3a.
Fig. 2Intraoperative site. (A) Percutaneous fixation of the plate with a Kirschner wire (*). Screw fixation through the suprasymphyseal trocar (#). (B) Endoscopic view at the plate osteosynthesis stabilizing the symphysis (arrow). (C) Intraoperative X-ray imaging showing the sufficient reduction of the symphyseal luxation, adequate length and alignment of the screws and (D) the correct positioning of the plate.
Fig. 3(A) Intraoperative endoscopic images show scar tissue (*) covering the plate. The trocars are placed closely to the symphysis to reduce the need of shear forces on the abdominal wall and to place the screwdriver in the correct angulation easily. (B) The scar tissue is being removed using a conventional raspartorium (+) through one of the trocars. The plate (#) becomes visible. After removing the scar tissue as well as the plate's screws (C) the plate itself can be grabbed with forceps through one of the trocars and be removed this way. We performed X-ray controls to validate the correct positioning of the instruments (D) as well as the removal of the entire osteosynthetic material (E).