OBJECTIVE: To analyze the reasons and the influence of internal fixation about the guide pin eccentricity of helical blade during proximal femoral nail anti-rotation (PFNA) internal fixation for femoral intertrochanteric fractures. METHODS: A retrospective analysis of the intraoperative imaging data of 175 patients with femoral intertrochanteric fractures, who underwent closed reduction and PFNA internal fixation between January 2018 and January 2020, was performed. There were 76 males and 99 females with an average age of 79.8 years (mean, 61-103 years). The internal between admission and operation was 12-141 hours (median, 32 hours). According to AO/Orthopaedic Trauma Association (AO/OTA) classification, the fractures were rated as type 31-A1 in 64 cases and type 31-A2 in 111 cases. In the intraoperative fluoroscopy image by C-arm X-ray machine, the caputcollum-diaphysis (CCD) was measured after closed reduction and internal fixation, respectively; the angles between the center line of the head nail hole and the axis of proximal nail and between the axis of guide pin and proximal nail were measured, and the difference between the two angles was evaluated; the quality of fracture reduction was evaluated according to the alignment of the medial cortex, anterior cortex of the head and neck bone block, and femoral shaft cortex; the position of the helical blade in the femoral head was evaluated according to the Cleveland method. RESULTS: The CCDs of proximal femur were (134.6±6.8)° after closed reduction and (134.9±4.3)° after internal fixation. There was no significant difference between pre- and post-internal fixation ( t=0.432, P=0.766). The angles between the center line of the head nail hole and the axis of proximal nail and between the axis of guide pin and proximal nail were (125.4±2.44)° and (126.3±2.3)°, respectively, showing significant difference ( t=2.809, P=0.044). The difference between the two angles was (0.8±2.2)°. The guide pin eccentricity of helical blade occurred in 47 cases. After tapping the helical blade along the eccentric guide pin, 10 cases had fracture reduction loss, and 5 cases had a poor position of the helical blade in the femoral head. CONCLUSION: During PFNA internal fixation, a variety of reasons can lead to the eccentric position of the guide pin of helical blade, including unstable fracture, soft tissue inserted, severe osteoporosis, mismatched tool, and fluoroscopic imaging factors. It is possible that the fracture end would be displaced again and the helical blade position may be poor when knocking into the helical blade along the eccentric guide pin. During operation, it should be judged whether the direction of the guide pin needs to be adjusted according to the eccentric angle.
OBJECTIVE: To analyze the reasons and the influence of internal fixation about the guide pin eccentricity of helical blade during proximal femoral nail anti-rotation (PFNA) internal fixation for femoral intertrochanteric fractures. METHODS: A retrospective analysis of the intraoperative imaging data of 175 patients with femoral intertrochanteric fractures, who underwent closed reduction and PFNA internal fixation between January 2018 and January 2020, was performed. There were 76 males and 99 females with an average age of 79.8 years (mean, 61-103 years). The internal between admission and operation was 12-141 hours (median, 32 hours). According to AO/Orthopaedic Trauma Association (AO/OTA) classification, the fractures were rated as type 31-A1 in 64 cases and type 31-A2 in 111 cases. In the intraoperative fluoroscopy image by C-arm X-ray machine, the caputcollum-diaphysis (CCD) was measured after closed reduction and internal fixation, respectively; the angles between the center line of the head nail hole and the axis of proximal nail and between the axis of guide pin and proximal nail were measured, and the difference between the two angles was evaluated; the quality of fracture reduction was evaluated according to the alignment of the medial cortex, anterior cortex of the head and neck bone block, and femoral shaft cortex; the position of the helical blade in the femoral head was evaluated according to the Cleveland method. RESULTS: The CCDs of proximal femur were (134.6±6.8)° after closed reduction and (134.9±4.3)° after internal fixation. There was no significant difference between pre- and post-internal fixation ( t=0.432, P=0.766). The angles between the center line of the head nail hole and the axis of proximal nail and between the axis of guide pin and proximal nail were (125.4±2.44)° and (126.3±2.3)°, respectively, showing significant difference ( t=2.809, P=0.044). The difference between the two angles was (0.8±2.2)°. The guide pin eccentricity of helical blade occurred in 47 cases. After tapping the helical blade along the eccentric guide pin, 10 cases had fracture reduction loss, and 5 cases had a poor position of the helical blade in the femoral head. CONCLUSION: During PFNA internal fixation, a variety of reasons can lead to the eccentric position of the guide pin of helical blade, including unstable fracture, soft tissue inserted, severe osteoporosis, mismatched tool, and fluoroscopic imaging factors. It is possible that the fracture end would be displaced again and the helical blade position may be poor when knocking into the helical blade along the eccentric guide pin. During operation, it should be judged whether the direction of the guide pin needs to be adjusted according to the eccentric angle.
Entities:
Keywords:
Femoral intertrochanteric fracture; eccentricity; helical blade; intramedullary nail