Hydroxyapatite/NELL-1 Nanoparticles Electrospun Fibers for Osteoinduction in Bone Tissue Engineering Application.

BACKGROUND: As commonly bone defect is a disease of jaw that can seriously affect implant restoration, the bioactive scaffold can be used as potential systems to provide effective repair for bone defect.
PURPOSE: A osteoinductive bone tissue engineering scaffold has been prepared in order to explore the effect of bioactive materials on bone tissue engineering.
METHODS: In this study, NELL-1 nanoparticles (Chi/NNP) and nano hydroxyapatite were incorporated in composite scaffolds by electrospinning and characterized using TEM, SEM, contact angle, tensile tests and in vitro drug release. In vitro biological activities such as MC3T3-E1 cell attachment, proliferation and osteogenic activity were studied.
RESULTS: With the addition of nHA and nanoparticles, the fiber diameter of PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group was significantly increased. Moreover, the hydrophilic hydroxyl group and amino group presented in nHA and nanoparticles had improved the hydrophilicity of the composite fibers. The composite electrospun containing Chi/NNPs can form a double protective barrier which can effectively prolong the release time of NELL-1 growth factor. In addition, the hydroxyapatite/NELL-1 nanoparticles electrospun fibers can promote attachment, proliferation, differentiation of MC3T3-E1 cells and good cytocompatibility, indicating better ability of inducing osteogenic differentiation.
CONCLUSION: A multi-functional PCL/nHA/NNPs composite fiber with long-term bioactivity and osteoinductivity was successfully prepared by electrospinning. This potential composite could be used as scaffolds in bone tissue engineering application after in vivo studies.

Introduction

Bone defect in jaw is a serious medical disease that can cause significant problem in the dental implant restoration. Traditionally bone defect can be treated by different techniques, such as autogenous bone transplantation, allogeneic bone transplantation and distraction osteogenesis, et al.1 However, these techniques can be limited due to secondary injury, poor plasticity, immune rejection, high technical requirements, high price and limited osteogenic capacity. In recent years, bone tissue engineering has drawn significant interest in bone defect treatment due to its unique advantages: abundant tissue sources and no secondary infection.2 The scaffold materials which can play an important role in bone tissue engineering should be endowed with some characters including it being with three-dimensional porous interconnected structure, good biocompatibility, degradability, being effectively loaded and continuously released growth factors.3–6 Bone biochemical microenvironment, which mainly consist of ECM molecules, signal molecules and other non-signal soluble factors, can constitute a complex network system for promoting bone reconstruction. As reported, bone biochemical microenvironment is not only the biological basis of bone tissue engineering, but also for the design of scaffold materials and the selection of bioactive factors. Therefore, how to construct an ideal scaffold in accordance with the above principles has become an important area of research, in which the osteogenic activity of scaffold can be considered as a pivotal important factor, and how to confer the scaffold with these properties is being studied.3

Polycaprolactone (PCL) is a bioresorbable material with good biocompatibility, and plays an important role in guiding bone regeneration.7 At present, polycaprolactone can be fabricated by electrospinning technology into nanofiber scaffold with good biocompatibility, good mechanical strength, porous interconnected structure, high specific surface area, capacity of being loaded with variety of growth factors. What is more important is that these composite scaffolds can simulate the structure of bone natural extracellular matrix.8 However, PCL can be restricted its application in bone regeneration due to its weak bioactivity and osteoinductivity.9 Nano hydroxyapatite (nHA) as the main inorganic component of bone matrix has a good affinity with adhesion protein and plays an important role in the differentiation and mineralization of osteoblasts, which can provide the composite scaffolds with an effective osteogenictivity.10–13 Some research has indicated that the addition of nHA can effectively improve the bioactivity and osteoinductivity of PCL, which can extend its applications in biomedical field.14 Ghorbani FM have successfully prepared PCL/nHA composite as scaffolds for bone regeneration, and the results showed that the composite scaffolds could promote osteogenesis and improve bone regenerative ability.15 Nevertheless, some growth factors are needed to participate in bone regeneration, and improve the bioactivity and osteogenictivity of PCL.16 Therefore, improving the osteogenictivity of PCL/nHA composite fiber has become an urgent need.

There are a variety of signal molecules participating in bone regeneration, among which NELL-1 protein as a new growth factor has attracted more and more attention. NELL-1 located in the downstream of Cbfa1/Runx2 can participate in the recruitment, growth, proliferation, differentiation, mineralization of osteoblasts and the interaction between cells and intercellular matrix.17 What is more important is that NELL-1 protein can induce more dense bone formation but not induce ectopic osteogenesis in muscle due to its specific osteogenictivity.18

In our previous study, we have successfully prepared chitosan based-nanoparticles loaded with NELL-1 (Chi/NNP) by desolvation technique and electrostatic self-assembly. In chitosan based-nanoparticles, chitosan shell was coated on bovine serum albumin (BSA) microsphere loaded with NELL-1 in order to stabilize BSA microsphere; thus, the nanoparticle can slowly release the NELL-1 and maintain the bioactivity of NELL-1.19

Based on the above understanding, the purpose of this study was that chitosan based-nanoparticles were incorporated into electrospun scaffolds loaded with nano hydroxyapatite by electrospinning technology, which can construct a double barrier for sustained-release of NELL-1 in order to obtain a better controlled release effect and endow scaffold materials with better osteogenic activity (Figure 1).

Figure 1

Schematic illustration of the fabrication of composite electrospun scaffolds loaded with chitosan-based nanoparticles and nHA.

Materials and Methods

Materials and Instruments

NEL-like molecule 1 (NELL-1), Polycaprolactone (PCL; average Mn 80,000), Bovine Serum Albumin (BSA), Chitosan (medium molecular weight), Fluorescein Isothiocyanate (FITC) and 4ʹ,6-diamidino-2-phenylindole (DAPI) were purchased from Sigma (St. Louis, MO, USA). Acetic acid (AA), Absolute alcohol, N.N-Dimethylformamide (DMF), Dichloromethane (DCM) and all chemicals were of analytical reagent grade, without further purification and purchased from Sinopharm chemical reagent Co., Ltd. China. Scanning electron microscope (SEM, Evo LS15,) was from Carl Zeiss, Germany. Transmission electron microscope (TEM, HT7700) was from Hitachi, Japan. Universal mechanical test instrument was from Jinan Runrui Technology Co., Ltd., China. Water contact angle analysis instrument was from TianJin Precision Instrument Co., Ltd., China. Microplate reader was from Thermo Fisher Scientific, US and Confocal laser scanning microscope (CLSM, Leica TCS Sp5 II) was from Leica, Germany.

Preparation of Chitosan Based-Nanoparticle Loaded with NELL-1

Chitosan-based nanoparticle loaded with NELL-1 (Chi/NNPs) was produced by desolvation method and electrostatic self-assembly technique according to our previous reports.19 Briefly, BSA (100 mg) and 160μL stock solution (50μg/100 μL in phosphate buffer at 20°C) of NELL-1 were dissolved in 10 mL deionized water, and then 40 mL of ethanol was then pumped into the 1% BSA solution using a micro syringe at 0.5 mL/min under continual stirring overnight in order to form aggregate. Then, 40 mL of chitosan solution was added to the mixture at 0.5 mL/min speed. The newly formed mixture was stirred for 8 h to yield the chitosan based-nanoparticle loaded with NELL-1 (Chi/NNPs). The chitosan-based nanoparticle loaded without NELL-1 (Chi/BNPs) were also prepared according to the procedure described above without addition of NELL-1. These chitosan nanoparticles were collected by centrifugation at 12,000 rpm for 20 min. Afterwards, the supernatant was discarded and the precipitated were dispersed in 30/70 distilled water/ethanol (v/v) solution. These purification steps were repeated 3 times. The white precipitated microspheres were then acquired and stored for future use.

Preparation of Electrospun Scaffolds

To prepare the electrospinning solution for PCL fiber (PCL), 2.4 g of PCL was dissolved into 5 mL of DMF and 7.5 mL of DCM at room temperature. To prepare the electrospinning solution loaded with chitosan-based nanoparticle (PCL/BNPs, PCL/NNPs), the nanospheres (BNPs or NNPs) were dissolved in 2.5mL of DMF solution, and then 1.5g of PCL was dissolved into 7.5mL of DCM. Then, the DMF solution with BNPs or NNPs was added drop by drop into DCM solution under magnetic stirring for at least 8 hours. To prepare the electrospinning solution loaded with nano-hydroxyapatite (PCL/nHA), nano-hydroxyapatite (30%, wt/wt), was added into PCL solution under magnetic stirring for at least 8 hours until it was completely mixed. To prepare the electrospinning solution loaded with nHA and chitosan-based nanoparticles (PCL/nHA/NNPs), according to the procedure descripted above, DMF solution dispersed with nanospheres was added drop by drop into DCM solution containing nHA under magnetic stirring for at least 8 h until it was completely mixed. Details of solution preparation for electrospinning can be shown in Table 1.

Table 1

Details of Solution Preparation for Electrospinning and Nanoparticles for All Polymers Including Molecular Weight (Mw), Concentration w/w (C), Solvents, Stirring Time (t), The Rotation Speed of Stirrer (V), and Temperature of the Hot Plate During Mixing

Polymer	Supplier	Mw(g.mol−1)	C (%)	Solvents	t (h)	Vr [rpm]	T(°C)
PCL	Sigma-Aldrich	80,000	75.47	DCM	4	800	25
Chi/NNPs	----	---	4.23	DMF	8	800	25
Chi/BNPs	----	---	4.23	DMF	8	800	25
Hydroxyapatite	Macklin, China	1004	30	DCM	≥8	1200	25
Chitosan	Sigma-Aldrich	50,000--190,000	0.15	AA	1	400	25

Abbreviations: PCL, polycaprolactone; Chi/NNPs, chitosan based-nanoparticles loaded with NELL-1; Chi/BNPs, chitosan based-nanoparticle loaded without NELL-1; AA, acetic acid; DMF, N.N-Dimethylformamide; DCM, dichloromethane.

The electrospinning solution was placed into a 30mL plastic syringe equipped with a medical-grade 6# stainless steel needle. The specific electrospun conditions were as follows: the high voltage was 25±0.5 kV, the flow rate of solution controlled by the micro injection pump was 3 mL/h, and the receiving distance was 20 cm. All the electrospun films were collected at room temperature and dried in a vacuum drying oven.

Characterization

Transmission Electron Microscope (TEM) characterization

All samples were deposited on the carbon film copper network within 5 seconds during electrospinning. After being dried, all samples were observed by field emission transmission electron microscopy (HT7700, Hitachi, Japan) at an acceleration voltage of 80 kV.

Scanning Electron Microscope (SEM) Characterization

All groups of electrospun fibers were cut into 4.5mm*4.5mm in size and fixed on the metal stage with conductive adhesive. After being sprayed with gold, all samples were observed by using SEM (Evo LS15, Carl Zeiss, Germany) with electron acceleration voltage of 20 kV. All photos captured by SEM were analyzed by using Image Pro Plus 6.0 software.

Tensile Strength

All groups of electrospun materials were cut into rectangle strips (5 cm*2 cm) with thickness of 0.5mm. The universal testing machine was used to test the tensile strength at the same parameters as follows: the tensile rate was 10 mm/min, the temperature was 20°C, and the relative humidity was 50%.

Contact Angle Characterization

A drop of ddH2O (0.5mL) was dropped on the surface of the electrospun material fixed on the glass slide. And then the digital camera was used to capture the image of the droplet on the surface of the material and then the contact angle was calculated by image processing software. The reported contact angle was the average of 6 measurements.

In vitro Drug Release

The release kinetic of NELL-1 in electrospun materials was measured in this study. The Human NELL-1 Elisa Kit was used to determine the protein concentration. Briefly, a certain amount of electrospun materials loaded with NELL-1 was placed in glass vials filled with 5 mL PBS, and incubated at 37°C. At the scheduled time point (12h,1d,2d,3d,4d,5d,6d,7d,8d,10d,14d, 18d,22d,26d,30d), 1mL PBS in glass vials was absorbed and put into another new glass vial, and then 1mL new PBS was added to the original glass vial. Nell-1 ELISA kit was used to detect the release of NELL-1 based on the standard curve established in advance and the cumulative release was calculated at preset time point. The release curve of Chi/NNPs microspheres was also determined according to our previous study.19

In vitro Cell Tests

Cell attachment, proliferation, and migration tests were performed using MC3T3-E1 cells (Subclonal line 14, derived from C57BL/6 mice). All groups of electrospun materials were cut into 6-well plate size, disinfected by ultraviolet light in super-clean worktable and fixed with a sterile steel ring in 6-well plate. And then MC3T3-E1 cells with density of 2×104/cm2 were seeded on electrospun materials and cultured in standard cell culture conditions.

Cell Attachment

After MC3T3-E1 cells were cultured on the scaffold materials for 12h, the culture medium was removed and the cells were fixed by 2.5% glutaraldehyde at 4°C for 4h. And then the cells were dehydrated with gradient alcohol (30%,50%,70%,95%,100%, V/V) for 10 min, respectively. The SEM (Evo LS15, Carl Zeiss, Germany) was used to observe cell attachment on materials after being vacuum-dried and gold-sprayed. In addition, the cytoskeleton was labeled by phalloidin-labeled-rhodamine and the cell nucleus was labeled by 4ʹ,6-diamidino-2-phenylindole (DAPI). And then confocal laser scanning microscopy (CLSM, Leica TCS Sp5 II, Germany) was used to observe the extension and adhesion of MC3T3-E1 cells on materials.

CCK-8 Assay

MC3T3-E1 cells with density of 2×103/well were seeded in 96 well plate where the electrospun material was fixed with sterile steel ring. At the predetermined time points (1 day, 4 days, 7 days) the original culture medium was discarded and CCK-8 solution (10 µL) was added into 96 well plate, the cells were incubated for 4 h at 37°C. The supernatant was carefully absorbed into a new 96 well plate and then detected by Thermo scientific microplate reader at 450 nm to get absorbance value (OD). A blank group (without cells and materials) and a control group (containing cells without materials) were set up.

Alkaline Phosphatase Assay(ALP)

MC3T3-E1 cells in a density of 1×105/well were seeded on 24 well plate in which the electrospun material was fixed with sterile steel ring. The medium was changed every 2 days. After the induction solution (α-MEM medium with 10% FBS, 10–8m dexamethasone and 10 mM β-glycerophosphate (50mg/mL ascorbic acid)) was added, the samples absorbance value (OD) at 405nm were tested according to ALP kit instructions at preset time (7 days, 14 days and 21 days) with three multiple holes in each group.

Reverse Transcription-Polymerase Chain Reaction (RT-PCR)

MC3T3-E1 cells in a density of 1.5×105/well were seeded in 6-well plates in which the electrospun material was fixed with sterile steel ring. The medium was changed every 2 days. After the induction solution was added, the scaffolds with cells were cut and the total RNA was extracted by Trizol at preset time (7 days, 14 days and 21 days). RT-PCR was used to detect the expression of osteogenic genes such as OPN when GAPDH was used as a control gene.

Statistical Analysis

IBM SPSS Statistics 26.0 software was employed for data analysis. All data were presented as mean ± standard deviation (S.D.). One-way ANOVA analysis was used to compare the mean in different groups. P<0.05 was considered statistically significant.

Results and Discussion

Morphologies and Properties of Electrospun Scaffolds

The morphologies of electrospun nanofiber are shown in Figure 2. In all groups, nanofibrous were prepared successfully, which presented disordered structure interlaced into a network. The pure PCL nanofiber was uniform with smooth surface, while the nanofibers embedded with nHA had certain agglomeration. The electrospun fiber embedded with nanospheres (BNPs or NNPs) has a slight protrusion which could lead to larger diameter. As shown in Figure 3, the diameters of electrospun nanofibers in PCL group, PCL/nHA group, PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group were 550.90±37.43nm, 617.18±30.17nm, 680.23±29.36nm, 689.36±37.04nm and 702.72±34.24 nm, respectively. Compared with pure PCL group, the fiber diameter of PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group was significantly increased (P<0.05) (Figure 3). The results could be ascribed to the change of solution viscosity and the introduction of nanoparticles and nHA.20,21

Figure 2

SEM and TEM images of electrospun fibers with TEM images inserted on the top right in each group.

Figure 3

Diameters of electrospinning fiber in different group.

Tensile Strength and Hydrophilicity

As shown in Figure 4, the tensile strength in pure PCL group is the highest, reaching 14.98±1.13 MPa. Compared with PCL group, the tensile strength in other four groups was significantly lower (P<0.05), but there was no significant difference between these four groups (P>0.05). With the addition of nHA or nanospheres, the tensile strength of electrospun fibers decreased, which can be ascribed to the addition of nHA or microspheres leading to the decrease of fiber continuity. The results of tensile strength of composite fibers showed sufficient mechanical properties to support proliferation of MC3T3-E1 cells.22,23,24

Figure 4

The tensile strength of electrospun fibers in different group.

Surface hydrophilicity is a major factor affecting cellular activities of the composite fibers such as adhesion and migration.25 Figure 5 shows the hydrophilicity test result of the composite fiber and the contact angles of all groups except PCL group decreased significantly and were less than 90°, indicating that these group showed best hydrophilicity. The improved surface hydrophilicity can be resulted from the hydrophilic hydroxyl group and amino group presented in nHA and nanoparticles in composite fibers.26 The improved surface hydrophilicity also can be ascribed to the change of surface roughness due to protrusions of the nanoparticles and nHA, which were confirmed morphologically using SEM and TEM in according with other scholars’ results.21,27 In addition, hydrophilicity can play a vital role in promoting cell adhesion at an early stage.26

Figure 5

Contact angle of electrospun fibers in different group with images inserted on the top.

Drug Release in vitro

As shown in Figure 6, the curve of NELL-1 release in pure Chi/NNPs nanoparticles was relatively gentle, and the release rate was 25.02±4.15% on the first day, while that of electrospun fibers was more moderate without obvious burst release. There was no statistical difference between PCL/NNPs group (12.22±1.68%) and PCL/nHA/NNPs group (15.49±3.11%) in release rate (P>0.05). More than 95% of the drug could be significantly sustain-released for about 8 days in Chi/NNPs microsphere group. However, the drug in PCL/NNPs group and PCL/nHA/NNPs group could be released at low concentration for more than 30 days, and the release amount was more than 92%. As shown in Figure 6, the release curve of PCL/NNPs group was similar to that of PCL/nHA/NNPs group. These results indicate that the burst release of drugs can be significantly reduced in electrospun group, which can avoid the side effects of excessive drug release at the initial stage, and prolong the release time of NELL-1 protein.

Figure 6

Cumulative release curve of NELL-1 growth factor in different samples.

The structure of chitosan based-nanoparticles embedded in fibers can present the following characteristics:28,30 on the one hand, nanofibers can provide space for the nanoparticles embedded in them; on the other hand, nanoparticles and nanofibers provide dual protection for the growth factors/drugs loaded on the microspheres, which can effectively avoid bad influence on growth factor and maintain good biological activity of growth factors.31–33, In other research, the nanoparticles loaded with VEGF and BMP-2 were embedded into the electrospun fiber, the result showed that the release time of growth factor was prolonged, the obvious sudden release was avoided at the initial stage, and at the same time the original biological activity of growth factor could be maintained.34–36 In this study, chitosan nanoparticles loaded with NELL-1 were incorporated into electrospinning fibers, the results showed that obvious spherical protrusions were observed in the fiber in TEM images. In other words, double barrier protection for growth factor can significantly delay the release of growth factor Nell-1,37,38 which can meet the continuous demand of growth factor in bone tissue regeneration, which is similar to the results of other scholars.20

In vitro Osteogenic Evaluation of Composite Fiber

Microscopy investigation allowed us a direct observation of the cells’ morphology. MC3T3-E1 cell morphology after 12 hours seeding on the composite fiber scaffolds is shown in Figure 7A–E 7a-e. The results were consistent with CLSM images (Figure 7A–E), in which actin and nucleus of the cytoskeleton were labeled with rhodamine phalloidin and DAPI, respectively, presenting as well spread cells in all groups. As it can be seen from Figure 7, MC3T3-E1 cells were anchored to the surface via filopodia along the electrospun fibers with good adhesion and growth. However, the cells on the composite scaffolds (PCL/nHA group, PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group) seemed to show better adherence with increased cell numbers (Figure 7F) and better cell-fiber entanglement, perhaps due to the better surface properties with increased hydrophilicity and the presence of the nanoparticles and nHA providing more cell adhesion sites.39 Nano hydroxyapatite can induce adhesion, proliferation and differentiation of osteoblasts. Zhang et al prepared composite material loaded with nHA as scaffolds for bone regeneration, and found that the composite scaffolds could promote osteogenesis.40 Nastaran et al prepared scaffolds with chitosan and found that chitosan could enhance osteoblast proliferation activity, indicating its better cytocompatibility.28,41 NELL-1 can induce MC3T3-E1 cells and promote cell adhesion.29,42 As our results showed that the composite scaffolds containing hydroxyapatite and microspheres can show good biocompatibility and significantly promote cell adhesion and growth. Proliferation of MC3T3-E1 cells cultured on the composite scaffolds was evaluated via changes in OD using the CCK-8 kit (Figure 8). On the 1st day of cell culture, the metabolic activity of MC3T3-E1 cells on all groups was similar, and there was no significant difference. On the 4th day of cell culture, the OD value (metabolic activity) of MC3T3-E1 cells on the surface of PCL/NNPs group and PCL/nHA/NNPs group were higher than other groups. The results can be ascribed to the improvement in hydrophilicity of the fiber surface and bioactive functional groups such as -OH and -NH2 in nanoparticles.43 The osteogenic activity of MC3T3-E1 cells cultured on the composite scaffolds was assessed via ALP activity (Figure 9). On the 14th days and 21th day, the metabolic activity (OD value) of MC3T3-E1 cells on the surface of PCL/nHA group, PCL/NNPs group and PCL/nHA/NNPs were higher than other groups. This result might be due to the improvement in hydrophilicity of the fiber surface and the bioactive functional groups in nanoparticles.19,42 RT-PCR was used to measure osteogenic activity of MC3T3-E1 cells in different scaffolds (Figure 10). On the 7th day of cell culture, the osteogenic activity (OPN mRNA) of MC3T3-E1 cells on all groups was similar, and there was no significant difference. On the 14th day of cell culture, the expression of OPN mRNA in PCL/nHA group, PCL/NNPs group and PCL/nHA/NNPs group was significantly higher than that of pure PCL group and PCL/BNPs group (P<0.05). On the 21st day of cell culture, the osteogenic activity of MC3T3-E1 cells on the surface of PCL/nHA/NNPs fibers was the highest. This might be related to NELL-1 promoting on OPN expression, this result was in accordance with Shen et al results that Nell-1 can activate the ERK pathway in pre-osteoblasts.17,44

Figure 7

MC3T3-E1 cell adhesion number, MC3T3-E1 cell adhesion morphology (SEM images), actin cytoskeletal organization and nucleus of cells (CLSM images) after incubation with different samples.

Figure 8

CCK-8 results of MC3T3-E1 cells after incubation with different samples for 1 days, 4 days and 7 days.

Figure 9

MC3T3-E1 cells ALP activity after cultivating for 7 days, 14 days and 21 days with different samples.

Figure 10

The OPN mRNA expression of MC3T3-E1 cells after incubation with different scaffolds for 7 days, 14 days and 21 days.

Conclusion

This study has successfully synthesized chitosan-based nanoparticle loaded with NELL-1 protein (Chi/NNPs) by desolvation method and electrostatic self-assembly technique, and prepared bioactive and osteoinductive PCL/nHA/NNPs composite fiber by electrospinning. The results showed that with the addition of nHA and nanoparticles, the fiber diameter of PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group was significantly increased. Moreover, the hydrophilic hydroxyl group and amino group presented in nHA and nanoparticles had improved the hydrophilicity of the composite fibers. The composite electrospun containing Chi/NNPs can form double protective barriers which can effectively prolong the release time of NELL-1 growth factor. The PCL/nHA/NNPs composite fiber can promote attachment, proliferation, osteogenic differentiation and maturation of MC3T3-E1 cells. The prepared composite electrospun material (PCL/nHA/NNPs) and the protocol proposed for the preparation of composite resulted in potential scaffold with proper mechanical properties, biological properties and osteogenic ability. This potential scaffold could be used for bone tissue engineering application after in vivo studies.