Noura M AlOtaibi1,2, Michael Dunne3, Ashraf F Ayoub1, Kurt B Naudi4. 1. Department of Oral and Maxillofacial Surgery, Glasgow University Dental Hospital and School, 378 Sauchiehall Street, Glasgow, G23JZ, UK. 2. Oral and Maxillofacial Surgery, King Saud University, Riyadh, 11362, Saudi Arabia. 3. Institute of Cardiovascular and Medical Sciences, University of Glasgow, Glasgow, G12 8QQ, UK. 4. Department of Oral and Maxillofacial Surgery, Glasgow University Dental Hospital and School, 378 Sauchiehall Street, Glasgow, G23JZ, UK. Kurt.BusuttilNaudi@glasgow.ac.uk.
Abstract
BACKGROUND: Dental implants are considered the gold standard replacement for missing natural teeth. The successful clinical performance of dental implants is due to their ability to osseointegrate with the surrounding bone. Most dental implants are manufactured from Titanium and it alloys. Titanium does however have some shortcomings so alternative materials are frequently being investigated. Effective preclinical studies are essential to transfer the innovations from the benchtop to the patients. Many preclinical studies are carried out in the extra-oral bones of small animal models to assess the osseointegration of the newly developed materials. This does not simulate the oral environment where the dental implants are subjected to several factors that influence osseointegration; therefore, they can have limited clinical value. AIM: This study aimed to develop an appropriate in-vivo model for dental implant research that mimic the clinical setting. The study evaluated the applicability of the new model and investigated the impact of the surgical procedure on animal welfare. MATERIALS AND METHODS: The model was developed in male New Zealand white rabbits. The implants were inserted in the extraction sockets of the secondary incisors in the maxilla. The model allows a split-mouth comparative analysis. The implants' osseointegration was assessed clinically, radiographically using micro-computed tomography (µ-CT), and histologically. A randomised, controlled split-mouth design was conducted in 6 rabbits. A total of twelve implants were inserted. In each rabbit, two implants; one experimental implant on one side, and one control implant on the other side were applied. Screw-shaped implants were used with a length of 8 mm and a diameter of 2 mm. RESULTS: All the rabbits tolerated the surgical procedure well. The osseointegration was confirmed clinically, histologically and radiographically. Quantitative assessment of bone volume and mineral density was measured in the peri-implant bone tissues. The findings suggest that the new preclinical model is excellent, facilitating a comprehensive evaluation of osseointegration of dental implants in translational research pertaining to the human application. CONCLUSION: The presented model proved to be safe, reproducible and required basic surgical skills to perform.
BACKGROUND: Dental implants are considered the gold standard replacement for missing natural teeth. The successful clinical performance of dental implants is due to their ability to osseointegrate with the surrounding bone. Most dental implants are manufactured from Titanium and it alloys. Titanium does however have some shortcomings so alternative materials are frequently being investigated. Effective preclinical studies are essential to transfer the innovations from the benchtop to the patients. Many preclinical studies are carried out in the extra-oral bones of small animal models to assess the osseointegration of the newly developed materials. This does not simulate the oral environment where the dental implants are subjected to several factors that influence osseointegration; therefore, they can have limited clinical value. AIM: This study aimed to develop an appropriate in-vivo model for dental implant research that mimic the clinical setting. The study evaluated the applicability of the new model and investigated the impact of the surgical procedure on animal welfare. MATERIALS AND METHODS: The model was developed in male New Zealand white rabbits. The implants were inserted in the extraction sockets of the secondary incisors in the maxilla. The model allows a split-mouth comparative analysis. The implants' osseointegration was assessed clinically, radiographically using micro-computed tomography (µ-CT), and histologically. A randomised, controlled split-mouth design was conducted in 6 rabbits. A total of twelve implants were inserted. In each rabbit, two implants; one experimental implant on one side, and one control implant on the other side were applied. Screw-shaped implants were used with a length of 8 mm and a diameter of 2 mm. RESULTS: All the rabbits tolerated the surgical procedure well. The osseointegration was confirmed clinically, histologically and radiographically. Quantitative assessment of bone volume and mineral density was measured in the peri-implant bone tissues. The findings suggest that the new preclinical model is excellent, facilitating a comprehensive evaluation of osseointegration of dental implants in translational research pertaining to the human application. CONCLUSION: The presented model proved to be safe, reproducible and required basic surgical skills to perform.
Entities:
Keywords:
Dental implants; In vivo study; Osseointegration; Preclinical investigation; Surgical model
Authors: Randa Alfotawei; Kurt Busuttil Naudi; David Lappin; Joseph Barbenel; Lucy Di Silvio; Keith Hunter; Jeremy McMahon; Ashraf Ayoub Journal: J Craniomaxillofac Surg Date: 2014-01-07 Impact factor: 2.078
Authors: S Caiazza; D Taruscio; F Ciaralli; P Crateri; P Chistolini; R Bedini; P Colangelo; S Pintucci Journal: Biomaterials Date: 1991-07 Impact factor: 12.479