| Literature DB >> 34094188 |
Juan Liu1, Jin Zeng1, Cheng Zhu1, Jianwei Miao2,3, Yu Huang3,4, Hendrik Heinz1.
Abstract
Molybdenum disulfide (Entities:
Year: 2020 PMID: 34094188 PMCID: PMC8162032 DOI: 10.1039/d0sc01443e
Source DB: PubMed Journal: Chem Sci ISSN: 2041-6520 Impact factor: 9.825
Comparison of key properties of 2H-MoS2 according to experiments and computational methods. From left to right: method, lattice parameters, Mo–S bond distance (r0), cleavage energy of the (0001) basal plane (Ecleav), major IR/Raman peak, in-plane Young’ modulus (Y), bulk modulus (B), contact angle with liquids at 298 K, atom mobility, compatibility and transferability of the potential
| Method | Lattice parameter |
|
| IR/Raman |
|
| Contact angle (°) | All atoms mobile | Applicable potentials and compatibility | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| H2O | CH2I2 | ||||||||
| Expt | 3.16 [ | 12.3 [ | 2.37 [ | 45–121 [ | 384 [ | 170–300 [ | 43 ± 3 [ | 69 ± 4 [ | 15 ± 2 [ | Yes | NA |
| This work | 3.16 | 12.25 | 2.38 | 150 ± 2 | 360 ± 5 | 175 ± 2 | 41.7 ± 1 | 69 ± 2 | 15 ± 2 | Yes | IFF, CVFF, PCFF, OPLS-AA, Dreiding, CHARMM, AMBER |
| DFT | 3.19 | 12.45 [ | 2.43 [ | 160–284 [ | 387 [ | 220 [ | 68 [ | NA | NA | Yes | NA |
| SR(2017)[ | 3.16 | 12.16 | NA | 241 | 160 | 226 | 43.7 | 69.6 | 0 | Yes | OPLS |
| LU(2016)[ | NA | NA | NA | NA | NA | NA | NA | 86–90 | NA | Yes | OPLS |
| JI(2013)[ | 3.21 | 11.25 [ | 2.39 [ | NA | NA | 229 | NA | NA | NA | Yes | Stillinger–Weber (SW) |
| DA(2012)[ | 3.20 | 11.59 [ | 2.42 [ | NA | NA | NA | NA | NA | NA | Yes | QEq |
| VA9(2010)[ | 3.25 | 12.23 [ | 2.45 [ | NA | 404 | NA | NA | 0 [ | NA | No | CVFF |
| VA8(2010)[ | 3.21 | 12.27 [ | 2.41 [ | NA | 584 | NA | NA | 0 [ | NA | No | CVFF |
| LI(2009)[ | 3.16 | 12.31 [ | 2.45 [ | NA | NA | NA | NA | 97.9 [ | NA | Yes | REBO |
| ON(2009)[ | 3.16 | 12.45 [ | 2.40 [ | NA | NA | NA | NA | NA | NA | No | Buckingham |
| MO(2008)[ | 3.05 | 13.89 [ | 2.34 [ | NA | NA | NA | NA | 69.4 [ | NA | No | Buckingham |
| BE(2003)[ | 3.16 | 12.31 [ | 2.43 [ | NA | NA | NA | NA | 0 [ | NA | No | Embedded |
| FA(1996)[ | 3.16 | 12.05 [ | 2.42 [ | NA | NA | NA | NA | NA | NA | Yes | Embedded empirical |
| BR(1992)[ | 3.17 | 12.28 [ | 2.42 [ | NA | NA | NA | NA | NA | NA | No | Empirical without Coulomb |
| DR(1988)[ | 3.19 | 11.74 [ | 2.42 [ | NA | NA | NA | NA | NA | NA | Yes | Empirical without Coulomb |
Major IR and Raman peak (Fig. 3c).
Details of the potential function are given in Table S1 in the ESI.
We estimate the cleavage energy (surface energy) as 150 ± 10 mJ m−2, close to the experimental value 121 mJ m−2 for natural bulk MoS2 samples (ref. 54) and to the lower end of values from DFT calculations of 160 mJ m−2 (ref. 19).
Reactive empirical bond-order (REBO) potential.
The energy function comprises multiple exponential terms.
Fig. 3Comparison of experimental data (red) and results from molecular dynamics simulation (black) for structural, mechanical, and vibrational properties of 2H-MoS2. (a) XRD patterns show a good match (experimental data from ref. 80). (b) The compressibility of bulk MoS2 is nearly identical in experiment and simulation (experimental data from ref. 63). (c) Experimental infrared data (from ref. 58 and 82) are reasonably approximated by MD simulation, although the intensities are difficult to reproduce in MD. MD simulation also captures additional Raman peaks (see experimental details in ref. 65). A simulated IR spectrum from DFT calculations with the rPBE functional (green) approximately reproduces the wavenumbers and relative intensities of the experimental data.
Fig. 1Model of a 2H-MoS2 unit cell (from ref. 55). The lattice parameters are a = b = 3.16 Å and c = 12.295 Å under standard conditions. The atomic charges for Mo and S are +0.5e and −0.25e, respectively. We describe the structure using two atom types for Mo and 4 atom types for S, which are necessary to identify unique bonds and angles. We distinguish one Mo–S bond of 2.37 Å length and five bond angles θ1, θ2, θ3, θ4, θ5, of which the θ2 angle (∠S1–Mo1–S3) can assume two values θ2a = 78.38° and θ2b = 134.4° and has no constraints in the model.
Fig. 2Comparison of the performance of prior parameters and new parameters for the structure of bulk and single-layer MoS2. 3D structure of MoS2 after 50 ns NPT simulation at 298.15 K and 1.013 MPa with (a) prior parameters (SR 2017, ref. 49) and (b) new parameters. The internal structure of the prior model collapses while it is maintained very close to X-ray data in the new model. (c) An AFM image of single-layer MoS2 with a thickness of ∼0.8 nm, showing a planar stiff geometry (reproduced with permission from ref. 56). (d and e) Snapshots of an MoS2 layer after 0.5 ns NVT simulation at 298.15 K in vacuum with prior parameters (SR 2017, ref. 49) and new parameters, respectively. The old parameters lead to unphysical lipid-like buckling, whereas the new model preserves the shape and allows minor undulations.
Lattice parameters for a (18 × 18 × 2) super cell of 2H-MoS2 in experiment (ref. 55) and calculated from NPT molecular dynamics with the new parameters (IFF) using CVFF, Dreiding, PCFF, COMPASS, CHARMM, AMBER and OPLS-AA energy expressions at 298.15 K and 1.013 MPa pressure
| Method |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|
| Expt (XRD) | 56.89 | 56.89 | 24.59 | 90 | 120 | 2.38 | 5.00 |
| CVFF, Dreiding | 56.89 | 56.89 | 24.50 | 90 | 120 | 2.36 | 5.03 |
| PCFF, COMPASS | 56.92 | 56.92 | 24.58 | 90 | 120 | 2.36 | 5.00 |
| CHARMM | 56.92 | 56.92 | 24.50 | 90 | 120 | 2.36 | 4.99 |
| AMBER | 57.11 | 57.20 | 24.51 | 90 | 120 | 2.37 | 4.97 |
| OPLS-AA | 57.23 | 57.19 | 24.57 | 90 | 120 | 2.37 | 4.96 |
Fig. 4Computation of surface and interfacial properties of 2H-MoS2. (a and b) The models used to calculate the cleavage energy comprise a cleaved surface slab of a thickness of 4 MoS2 layers and a 40 Å vacuum layer, as well as the equivalent 3D periodic bulk system for reference. A is the surface area. The computed cleavage energy agrees with the reference data from experiments and from DFT. (c and d) Representative equilibrium snapshots of water and CH2I2 on the 2H-MoS2 surface at 298 K. Computed contact angles θ agree with laboratory data without further adjustable parameters. A new method to determine the contact angle was employed that is less ambiguous than prior methods. It involves drawing a circle of a size that best approximates the contour of the liquid and reading out the angle between the diameter that ends at the solid–liquid interface and the diameter aligned with the surface normal (see black construction in c).
Fig. 5Adsorption characteristics of three peptides identified by phage display and a control sequence on 2H-MoS2 surfaces in aqueous solution at 298.15 K and 101.3 kPa from molecular dynamics simulation. Side and top views of adsorbed conformations in equilibrium are shown, including highlights of specific binding features. Adsorption energies, the average number of displaced water molecules on the surface, and the percentage of contact time for each residue (within 3.5 Å from the MoS2 surface) are identified. The color code in the bar charts (c, f, i, l) represents the hydrophobicity according to the Eisenberg and Weiss scale (ref. 98).
Fig. 6Adsorption characteristics of three peptide mutants (from ref. 89) and a control sequence (from ref. 93) on 2H-MoS2 surfaces in aqueous solution at 298.15 K and 101.3 kPa from molecular dynamics simulations. Side and top views of adsorbed conformations in equilibrium are shown, including highlights of specific binding features. Adsorption energies, the average number of displaced water molecules on the surface, and the percentage of contact time for each residue (within 3.5 Å from the MoS2 surface) are indicated. The color code in the bar charts (c, f, i, l) represents the hydrophobicity according to the Eisenberg and Weiss scale (ref. 98).
Fig. 7Relationship between the adsorption energy of peptides and the number of replaced water molecules in the first molecular layer on the MoS2 surface. On average, every replaced water molecule contributes −3.3 kcal mol−1 binding energy.
| I. Nonbond | Atomic charge ( |
|
| ||
|---|---|---|---|---|---|
| CVFF, CHARMM, AMBER, DREIDING, OPLS-AA (12-6 LJ) | PCFF, COMPASS (9-6 LJ) | CVFF, CHARMM, AMBER, DREIDING, OPLS-AA (12-6 LJ) | PCFF, COMPASS (9-6 LJ) | ||
| Mo | +0.5 | 480 | 501 | 0.07 | 0.054 |
| S | −0.25 | 384 | 398 | 0.30 | 0.26 |
The equilibrium bond length (r0,) and bond stretching constant (K) are the same for all force fields.
The equilibrium bond angles (θ0,) and angle bending constants (K) are the same for all the force fields. The values for θ0, are equal to data from X-ray diffraction (Fig. 1). We recommend a minor modification of angles θ1 and θ4 for OPLS-AA, which uses significantly different scaling rules for nonbond interactions between 1, 4 bonded atoms. A complete list of individual angles and angle bending constants is given in Table S2 in the ESI.
The value in brackets is recommended for OPLS-AA to best reproduce bond length and lattice parameters. The default angle of 84.32° still facilitates good performance.
Two values are possible for θ2: θ2a and θ2b. The values are represented using an angle bending constant of zero without loss of accuracy (see Table S2 in the ESI for details).
| II. Bond |
|
|
|---|---|---|
| Mo–S | 239 | 118 |
| III. Angles |
|
|
|---|---|---|
|
| 84.32 (OPLS only: 83.5) | 205 |
|
| 78.38 ( | 0 |
|
| 134.4 | 3.6 |
|
| 78.38 | 3.6 |