Optimization of Polysaccharide Hydrocolloid for the Development of Bioink with High Printability/Biocompatibility for Coextrusion 3D Bioprinting.

Bioink is the main component of 3D bioprinting process and is crucial for the generation of sophisticated 3D structures through precise spatial control. Therefore, bioink's core material must have characteristics that support good printability as well as biocompatibility. However, there is a lack of bioinks developed that satisfy these characteristics at the same time. In this work, our aim was to develop a bioink that satisfies the needs for both printability and biocompatibility through effectively utilizing hydrocolloid materials. To do so, carboxymethyl cellulose (CMC) and xanthan gum (XG) were used to maintain proper shear properties at high pressure and increase the mechanical properties of bioink without excessively affecting the viscosity, and thus enhance printability and biocompatibility. Various bioink formulations were applied to 3D printing process and the printability optimization was carried out through adjusting the hydrocolloid contents in connection with different cross-linking methods. Through utilization of hydrocolloids, the printability and rheological analysis showed that the bioink has improved mechanical properties and confirmed that the printability could be adjusted by controlling the CMC and XG ratio. Moreover, cell viability and immunocytochemical staining analyses showed cell compatibility with enhanced stability. The proposed convenient method to control the printability with improved biocompatibility suggests more appropriate use of bioink for co-axial 3D bioprinting.