Literature DB >> 34071077

Clinical Feasibility of Fully Sintered (Y, Nb)-TZP for CAD-CAM Single-Unit Restoration: A Pilot Study.

Ki-Won Jeong1, Hyung-In Yoon1, Jae-Hyun Lee1, In-Sung Luke Yeo1, Dae-Joon Kim2, Jung-Suk Han1.   

Abstract

Fifteen participants (9 male, 6 female) received a total of 15 monolithic single restorations made from fully sintered (Y, Nb)-TZP (tetragonal zirconia polycrystal) block. The restorations were clinically evaluated for survival, success rate, and periodontal probing depths 6 months after the insertion of the restorations. Esthetic, functional, and biological evaluations were also performed over a 6-month follow-up period. The survival and success rates of the single-unit restorations were 100%. The periodontal probing depth values ranged from 1 to 3 mm. No complications with regard to functional and biological properties were observed after 6 months. The postoperative sensitivity was only a transient phenomenon. The fully sintered (Y, Nb)-TZP single-unit restoration showed highly acceptable quality with successful clinical performance over 6 months.

Entities:  

Keywords:  CAD-CAM; ceramics; complication; fixed dental prostheses; monolithic; zirconia

Year:  2021        PMID： 34071077     DOI： 10.3390/ma14112762

Source DB:  PubMed          Journal:  Materials (Basel)        ISSN： 1996-1944            Impact factor:   3.623


  35 in total

Review 1.  Status of current CAD/CAM technology in dental medicine.

Authors:  J Tinschert; G Natt; S Hassenpflug; H Spiekermann
Journal:  Int J Comput Dent       Date:  2004-01       Impact factor: 1.883

2.  Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results.

Authors:  Matthias Roediger; Nikolaus Gersdorff; Alfons Huels; Sven Rinke
Journal:  Int J Prosthodont       Date:  2010 Mar-Apr       Impact factor: 1.681

Review 3.  Recommendations for conducting controlled clinical studies of dental restorative materials. Science Committee Project 2/98--FDI World Dental Federation study design (Part I) and criteria for evaluation (Part II) of direct and indirect restorations including onlays and partial crowns.

Authors:  Reinhard Hickel; Jean-François Roulet; Stephen Bayne; Siegward D Heintze; Ivar A Mjör; Mathilde Peters; Valentin Rousson; Ros Randall; Gottfried Schmalz; Martin Tyas; Guido Vanherle
Journal:  J Adhes Dent       Date:  2007       Impact factor: 2.359

4.  Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided design/computer-aided manufacturing systems.

Authors:  Philipp Kohorst; Henrike Brinkmann; Jiang Li; Lothar Borchers; Meike Stiesch
Journal:  Eur J Oral Sci       Date:  2009-06       Impact factor: 2.612

5.  Correlation of surface texture with the stainability of ceramics.

Authors:  Pinar Kursoglu; Pelin F Karagoz Motro; Ender Kazazoglu
Journal:  J Prosthet Dent       Date:  2014-01-29       Impact factor: 3.426

6.  Dimensional changes from the sintering process and fit of Y-TZP copings: Micro-CT analysis.

Authors:  Carlos Eduardo Edwards Rezende; Ana Flávia Sanches Borges; Rander Moreira Macedo; José Henrique Rubo; Jason Alan Griggs
Journal:  Dent Mater       Date:  2017-09-19       Impact factor: 5.304

7.  Clinical evaluation of monolithic zirconia multiunit posterior fixed dental prostheses.

Authors:  Nina Grguraš Lestan; Mutlu Özcan; Andraž Kocjan; Čedomir Oblak
Journal:  J Prosthet Dent       Date:  2021-04-23       Impact factor: 3.426

Review 8.  Plaque formation and marginal gingivitis associated with restorative materials.

Authors:  Luis A Litonjua; Leyvee L Cabanilla; Lawrence J Abbott
Journal:  Compend Contin Educ Dent       Date:  2012-01

9.  A 3-year follow-up study of all-ceramic single and multiple crowns performed in a private practice: a prospective case series.

Authors:  Gianluca M Tartaglia; Ernesto Sidoti; Chiarella Sforza
Journal:  Clinics (Sao Paulo)       Date:  2011       Impact factor: 2.365

10.  Trueness of the Inner Surface of Monolithic Crowns Fabricated by Milling of a Fully Sintered (Y, Nb)-TZP Block in Chairside CAD-CAM System for Single-visit Dentistry.

Authors:  Jun-Ho Cho; Hyung-In Yoon; Jung-Suk Han; Dae-Joon Kim
Journal:  Materials (Basel)       Date:  2019-10-05       Impact factor: 3.623
View more
  1 in total

1.  Comparative analysis on intaglio surface trueness, wear volume loss of antagonist, and fracture resistance of full-contour monolithic zirconia crown for single-visit dentistry under simulated mastication.

Authors:  Yong-Kyu Kim; Hyung-In Yoon; Dae-Joon Kim; Jung-Suk Han
Journal:  J Adv Prosthodont       Date:  2022-06-27       Impact factor: 1.989
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.