| Literature DB >> 34023718 |
Emily J Hotton1, Sophie Renwick2, Erik Lenguerrand3, Julia Wade4, Tim J Draycott2, Joanna F Crofts2, Natalie S Blencowe5.
Abstract
OBJECTIVE: Assisted vaginal birth (AVB) is a complex intervention involving medical devices, comprising multiple components. This complexity creates difficulties when designing and conducting randomised controlled trials (RCTs), in terms of describing, standardising and monitoring the intervention, and accounting for differing clinician expertise. This review examines the reporting standards of complex interventions involving a medical device, in the context of AVB RCTs. STUDYEntities:
Keywords: Assisted vaginal birth; Complex interventions; Forceps; Odon Device; Reporting standards; Ventouse
Mesh:
Year: 2021 PMID: 34023718 PMCID: PMC8250286 DOI: 10.1016/j.ejogrb.2021.05.026
Source DB: PubMed Journal: Eur J Obstet Gynecol Reprod Biol ISSN: 0301-2115 Impact factor: 2.435
Fig. 1Flow diagram of papers throughout the systematic review, according to PRISMA criteria [43].
Descriptions and standardisation of the co-interventions.
| Component | Steps within component | Intervention description |
|---|---|---|
| Device application | Cup insertion | ‘The rubber cup was introduced by squeezing it together and advanced towards the fetal head…’ [ |
| Check position | ‘…and placed near the occipital fontanelle to ensure flexion of the vertex.’ [ | |
| Tissue check | ‘The maternal soft tissue was interposed between the cup and fetal scalp was cleared by digital examination.’ [ | |
| Creating a vacuum | Support cup | ‘With the cup gently pressed against the fetal head, the suction pressure…’ [ |
| Increase in pressure to 0.2 | ‘…vacuum was rapidly induced over 2−3 minutes. At the pressure of 0.2 kg/cm2 the application was checked…’ [ | |
| ‘An initial vacuum of 20 mmHg was applied for 1 min…’ [ | ||
| Tissue check | ‘…vacuum was rapidly induced over 2−3 minutes. At the pressure of 0.2 kg/cm2 the application was checked…’ [ | |
| Increase in pressure to 0.8 | ‘For both arms of the trial, the vacuum employed was 0.8 kg/cm2’ [ | |
| ‘The cups were attached to a hand-pump and the pressure was taken directly to 0.6−0.8 kg/cm2.’ [ | ||
| ‘Negative pressure applied with the metal cup was 0.8 kg/cm2, being gradually applied during 6 min, whereas with the Silastic cup, the pressure was immediately lowered to 1 kg/cm2’ [ | ||
| ‘Malmström cup, vacuum was created gradually by increasing the suction by 0.2 kg/cm2 every 2 min until negative pressure of 0.8 kg/cm2 was reached. With the soft cup, negative pressure was increased to 0.8 kg/cm2 in 1 min’ [ | ||
| ‘The vacuum pressure was then taken up directly to 45−50 mmHg.’ [ | ||
| ‘The conventional stepwise method consisted of four incremental steps of 0.2 kg/cm2 every 2 min to obtain a final negative pressure of 0.8 kg/cm2. In the rapid methods the negative pressure of 0.8 kg/cm2 was applied in one step.’ [ | ||
| ‘Pressure was maintained to 60 mmHg during traction in the uterus contraction.’ [ | ||
| ‘The highest possible level of negative pressure (usually −0.8 kg/cm2) was obtained in a single step, usually requiring 1−2 minutes, with an electric vacuum pump controlled by a foot pedal.’ [ | ||
| ‘For vacuum-assisted deliveries, pressure gradients of −54 to −58 cmHg were developed over 5−10 seconds…pressure was decreased to −10cmHg between contractions.’ [ | ||
| ‘…the Malmstrom cup was applied, a vacuum was created gradually by increasing the suction by 0.2 kg/cm every 2 min until a negative pressure of 0.8 kg/cm was reached. With the soft Silc-cup, negative pressure was increased to 0.8 kg/cm in 1 min’ [ | ||
| Device traction | Tissue check | ‘The operator immediately made a check to ensure that maternal tissue was not included under the edge of the cup’ [ |
| Monitor what? | ‘The non-pulling fingers were applied on the foetal scalp to detect any leakage of seal. [ | |
| Gentle traction with contraction | ‘The first pull was with the next contraction.’ [ | |
| ‘A continuous and even traction (in synchrony with uterine contraction) using the accoucher’s body weight, was applied with the pully elbow fully extended.’ [ | ||
| ‘…the first pull was with the next contraction.’ [ |
Details of co-interventions.
| Co-intervention | Verbatim intervention description details |
|---|---|
| Bladder care | ‘The bladder was emptied before application of the vacuum cup…’ [ |
| ‘…the bladder was catheterised.’ [ | |
| ‘…the bladder was emptied before application of the cup.’ [ | |
| ‘…bladder empty.’ [ | |
| ‘…empty bladder.’ [ | |
| Maternal position | ‘…placed in the dorsal lithotomy position with left lateral tilt.’ [ |
| ‘The patient was put in the lithotomy position…’ [ | |
| ‘Position woman in lithotomy position.’ [ | |
| Analgesia | ‘Continuous epidural anaesthesia…was provided to all patients after they entered the active phase of labour …’ [ |
| ‘All patients received left lateral perineal infiltration with 20 ml 1% lidocaine.’ [ | |
| ‘The perineum was infiltrated with lignocaine 1%…’ [ | |
| “Provide adequate analgesia according to facility procedures.’ [ |
Details of device use standardisation for components of ventouse interventions: flexible (F), mandatory (M) and optional (O).
| Component | Verbatim description of standardisation | |
|---|---|---|
| Choice of device (F) | ‘…the exact type of cup to be used (i.e. whether silastic, metal, etc.), was at the discretion of the obstetrician performing the delivery…’ [ | |
| ‘…range of metal cups was used (40−60 mm), Malmström, anterior, posterior Bird & ‘New Generation’ cups) depending on availability & operator preferences.’ [ | ||
| ‘The choice of which conventional cup [comparator] to use was then made by each individual clinician according to clinical judgement for each case.’ [ | ||
| ‘Three sizes of metal cups were used, 40, 50 and 60 mm in diameter. The rubber cups…were 50 and 60 mm in diameter.’ [ | ||
| ‘Decision for forceps delivery or ventouse extraction was of consultant and the choice of method was dependent entirely on his/her judgement.’ [ | ||
| Creating vacuum (M) | ‘Negative pressure gradients were those suggested by the manufacturers…−0.2 kg/cm2 between contractions and -0.7 kg/cm2 for pulls…during contractions’ [ | |
| Descent should be achieved with each contraction (M) | ‘abandoned if station was not gained with traction or if any scalp trauma was noted…’ [ | |
| ‘Descent should be seen with each traction…’ [ | ||
| Delivery should be achieved with 3−4 contractions (M) | ‘…without regard to the number of extraction attempts (“pulls”)…’ [ | ‘…traction efforts to deliver the baby were kept to less than three…’ [ |
| ‘…three ‘pulls’ (one ‘pull’ being traction during a single maternal contraction)…)’ [ | ‘According to departmental policy, a “freshman” is asked to stop the procedure after 3–4 pulls have failed to complete the ventouse delivery…’ [ | |
| ‘…4 pulls.’ [ | ||
| Cup displacement (M) | ‘…vacuum extractor was considered to have failed when the cup fell more than twice…’ [ | |
| ‘Three cup disengagements (“pop offs”) mandated abandonment of the vacuum procedure.’ [ | ||
| ‘…one loss of suction…’ [ | ||
| ‘…the procedure should be abandoned if the cup detaches twice.’ [ | ||
| Cup reapplication (M) | ‘one reapplication of the cup was permitted with further detachment indicating…a change in mode of delivery.’ [ | |
| ‘Only two reapplications of the cup were allowed.’ [ | ‘If a cup slipped off, it was replaced once…’ [ | |
| ‘..only three reapplications of the cup were allowed.’ [ | ||
| Delivery should be achieved within 15 min of cup application (M) | ‘The time limit of application was 15 min’ [ | ‘restriction on the…duration of the extraction.’[ |
| ‘…no longer than 20 min…’ [ | ‘…30 min after the beginning of traction attempts.’ [ | |
| Instrument failure (O) | ‘If delivery with the selected instrument was not successful, the subsequent course of action (i.e. delivery with another instrument or caesarean section) was at the discretion of the obstetrician conducting the delivery.’ [ | |