Literature DB >> 33949367

Conformal single cell hydrogel coating with electrically induced tip streaming of an AC cone.

Zehao Pan1, Loan Bui2, Vivek Yadav1, Fei Fan2, Hsueh-Chia Chang3, Donny Hanjaya-Putra3.   

Abstract

Encapsulation of single cells in a thin hydrogel provides a more precise control of stem cell niches and better molecular transport. Despite the recent advances in microfluidic technologies to allow encapsulation of single cells, existing methods rely on special crosslinking agents that are pre-coated on the cell surface and subject to the variation of the cell membrane, which limits their widespread adoption. This work reports a high-throughput single-cell encapsulation method based on the "tip streaming" mode of alternating current (AC) electrospray, with encapsulation efficiencies over 80% after tuned centrifugation. Dripping with multiple cells is curtailed due to gating by the sharp conic meniscus of the tip streaming mode that only allows one cell to be ejected at a time. Moreover, the method can be universally applied to both natural and synthetic hydrogels, as well as various cell types, including human multipotent mesenchymal stromal cells (hMSCs). Encapsulated hMSCs maintain good cell viability over an extended culture period and exhibit robust differentiation potential into osteoblasts and adipocytes. Collectively, electrically induced tip streaming enables high-throughput encapsulation of single cells with high efficiency and universality, which is applicable for various applications in cell therapy, pharmacokinetic studies, and regenerative medicine.

Entities:  

Mesh:

Substances:

Year:  2021        PMID: 33949367      PMCID: PMC8127873          DOI: 10.1039/d0bm02100h

Source DB:  PubMed          Journal:  Biomater Sci        ISSN: 2047-4830            Impact factor:   6.843


  45 in total

1.  Combining bio-electrospraying with gene therapy: a novel biotechnique for the delivery of genetic material via living cells.

Authors:  Eliot Ward; Emma Chan; Kenth Gustafsson; Suwan N Jayasinghe
Journal:  Analyst       Date:  2010-01-27       Impact factor: 4.616

2.  Single cell-laden protease-sensitive microniches for long-term culture in 3D.

Authors:  Philipp S Lienemann; Torsten Rossow; Angelo S Mao; Queralt Vallmajo-Martin; Martin Ehrbar; David J Mooney
Journal:  Lab Chip       Date:  2017-02-14       Impact factor: 6.799

3.  Cell surface engineering with polyelectrolyte multilayer thin films.

Authors:  John T Wilson; Wanxing Cui; Veronika Kozlovskaya; Eugenia Kharlampieva; Di Pan; Zheng Qu; Venkata R Krishnamurthy; Joseph Mets; Vivek Kumar; Jing Wen; Yuhua Song; Vladimir V Tsukruk; Elliot L Chaikof
Journal:  J Am Chem Soc       Date:  2011-04-14       Impact factor: 15.419

4.  Centering Single Cells in Microgels via Delayed Crosslinking Supports Long-Term 3D Culture by Preventing Cell Escape.

Authors:  Tom Kamperman; Sieger Henke; Claas Willem Visser; Marcel Karperien; Jeroen Leijten
Journal:  Small       Date:  2017-04-28       Impact factor: 13.281

5.  Microfluidic Generation of Monodisperse, Structurally Homogeneous Alginate Microgels for Cell Encapsulation and 3D Cell Culture.

Authors:  Stefanie Utech; Radivoje Prodanovic; Angelo S Mao; Raluca Ostafe; David J Mooney; David A Weitz
Journal:  Adv Healthc Mater       Date:  2015-06-03       Impact factor: 9.933

Review 6.  Single-Cell Microgels: Technology, Challenges, and Applications.

Authors:  Tom Kamperman; Marcel Karperien; Séverine Le Gac; Jeroen Leijten
Journal:  Trends Biotechnol       Date:  2018-04-12       Impact factor: 19.536

7.  Synthesis and orthogonal photopatterning of hyaluronic acid hydrogels with thiol-norbornene chemistry.

Authors:  William M Gramlich; Iris L Kim; Jason A Burdick
Journal:  Biomaterials       Date:  2013-09-20       Impact factor: 12.479

8.  Vascular endothelial growth factor and substrate mechanics regulate in vitro tubulogenesis of endothelial progenitor cells.

Authors:  Donny Hanjaya-Putra; Jane Yee; Doug Ceci; Rachel Truitt; Derek Yee; Sharon Gerecht
Journal:  J Cell Mol Med       Date:  2010-10       Impact factor: 5.310

9.  Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels.

Authors:  Mark A Skylar-Scott; Sebastien G M Uzel; Lucy L Nam; John H Ahrens; Ryan L Truby; Sarita Damaraju; Jennifer A Lewis
Journal:  Sci Adv       Date:  2019-09-06       Impact factor: 14.136

10.  Jammed Microgel Inks for 3D Printing Applications.

Authors:  Christopher B Highley; Kwang Hoon Song; Andrew C Daly; Jason A Burdick
Journal:  Adv Sci (Weinh)       Date:  2018-10-24       Impact factor: 16.806

View more
  2 in total

1.  4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture.

Authors:  Connor E Miksch; Nathaniel P Skillin; Bruce E Kirkpatrick; Grace K Hach; Varsha V Rao; Timothy J White; Kristi S Anseth
Journal:  Small       Date:  2022-06-22       Impact factor: 15.153

Review 2.  Biomimetic Hydrogels to Promote Wound Healing.

Authors:  Fei Fan; Sanjoy Saha; Donny Hanjaya-Putra
Journal:  Front Bioeng Biotechnol       Date:  2021-09-20
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.