Adjunctive procedure with solvent mixtures in non-surgical endodontic retreatment: does it affect root dentin hardness?

The aim of this study was to compare the effects of new irrigation solvent mixtures with Methyl ethyl ketone (MEK)/Tetrachloroethylene (TCE) and MEK/Orange oil (OOil), and different agitation techniques on dentin hardness. One hundred forty-four mandibular teeth were prepared and standardized, with each root's middle part transversely sectioned. Initial hardness was measured using a Vickers microhardness tester. Specimens were divided into four groups of agitation techniques (n = 36): no agitation; EndoActivator; IrriSafe; and XP-endo Finisher R. Each group was subdivided into six subgroups of irrigation protocols (n = 6): saline solution; NaOCl + EDTA; NaOCl + EDTA + MEK/TCE; MEK/TCE; NaOCl + EDTA + MEK/OOil; MEK/OOil. Final hardness was measured. The irrigation protocols NaOCl + EDTA, NaOCl + EDTA + MEK/TCE, and NaOCl + EDTA + MEK/OOil significantly decreased dentin hardness, while MEK/OOil increased it (p < 0.05). Comparing to NaOCl + EDTA sequence, dentin hardness increased significantly with the additional exposure to MEK/TCE (3%NaOCl + 17%EDTA + MEK/TCE) or MEK/OOil (3%NaOCl + 17%EDTA + MEK/OOil) (p < 0.05). There were no significant differences regarding agitation effects on dentin hardness decrease. The irrigation protocols affected dentin hardness significantly. However, the additional solvent proposals do not seem to address further concerns on dentin's mechanical properties. Agitation did not show any influence on dentin's hardness reduction.