Literature DB >> 33561147

Reference evapotranspiration of Brazil modeled with machine learning techniques and remote sensing.

Santos Henrique Brant Dias1, Roberto Filgueiras2, Elpídio Inácio Fernandes Filho3, Gemima Santos Arcanjo4, Gustavo Henrique da Silva2, Everardo Chartuni Mantovani2, Fernando França da Cunha2.   

Abstract

Reference evapotranspiration (ETo) is a fundamental parameter for hydrological studies and irrigation management. The Penman-Monteith method is the standard to estimate ETo and requires several meteorological elements. In developing countries, the number of weather stations is insufficient. Thus, free products of remote sensing with evapotranspiration information must be used for this purpose. In this context, the objective of this study was to estimate monthly ETo from potential evapotranspiration (PET) made available by MOD16 product. In this study, the monthly ETo estimated by Penman-Monteith method was considered as the standard. For this, data from 265 weather station of the National Institute of Meteorology (INMET), spread all over the Brazilian territory, were acquired for the period from 2000 to 2014 (15 years). For these months, monthly PET values from MOD16 product for all Brazil were also downloaded. By using machine learning algorithms and information from WorldClim as covariates, ETo was estimated through images from the MOD16 product. To perform the modeling of ETo, eight regression algorithms were tested: multiple linear regression; random forest; cubist; partial least squares; principal components regression; adaptive forward-backward greedy; generalized boosted regression and generalized linear model by likelihood-based boosting. Data from 2000 to 2012 (13 years) were used for training and data of 2013 and 2014 (2 years) were used to test the models. The PET made available by the MOD16 product showed higher values than those of ETo for different periods and climatic regions of Brazil. However, the MOD16 product showed good correlation with ETo, indicating that it can be used in ETo estimation. All models of machine learning were effective in improving the performance of the metrics evaluated. Cubist was the model that presented the best metrics for r2 (0.91), NSE (0.90) and nRMSE (8.54%) and should be preferred for ETo prediction. MOD16 product is recommended to be used to predict monthly ETo, which opens possibilities for its use in several other studies.

Entities:  

Mesh:

Year:  2021        PMID: 33561147      PMCID: PMC7872264          DOI: 10.1371/journal.pone.0245834

Source DB:  PubMed          Journal:  PLoS One        ISSN: 1932-6203            Impact factor:   3.240


  3 in total

1.  Generalized additive modeling with implicit variable selection by likelihood-based boosting.

Authors:  Gerhard Tutz; Harald Binder
Journal:  Biometrics       Date:  2006-12       Impact factor: 2.571

Review 2.  Evaporation and environment.

Authors:  J L Monteith
Journal:  Symp Soc Exp Biol       Date:  1965

3.  Multi-decadal trends in global terrestrial evapotranspiration and its components.

Authors:  Yongqiang Zhang; Jorge L Peña-Arancibia; Tim R McVicar; Francis H S Chiew; Jai Vaze; Changming Liu; Xingjie Lu; Hongxing Zheng; Yingping Wang; Yi Y Liu; Diego G Miralles; Ming Pan
Journal:  Sci Rep       Date:  2016-01-11       Impact factor: 4.379

  3 in total
  1 in total

1.  Spatiotemporal Variation in Actual Evapotranspiration and the Influencing Factors in Ningxia from 2001 to 2020.

Authors:  Huihui Liu; Dongdong Song; Jinling Kong; Zengguang Mu; Qiutong Zhang; Xixuan Wang
Journal:  Int J Environ Res Public Health       Date:  2022-10-04       Impact factor: 4.614

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.