| Literature DB >> 33480673 |
Saejin Oh1, Andrei Nikolaev1, Kan Tagami1, Thi Tran1, Dongwook Lee2,3, Sanjoy Mukherjee4, Rachel A Segalman2,4, Songi Han1,2, Javier Read de Alaniz1, Michael L Chabinyc4.
Abstract
Polymers that are elastic while supporting charge transport are desirable for flexible and soft electronics. Many polymers with bulky and conjugated redox-active pendant units have high glass transition temperatures (Tg) in their neutral form that will not lead to elasticity at room temperature. Their behavior in charged form in the solid state without an electrolyte has not been extensively studied. Here, the design strategy of polymeric ionic liquid where two weakly interacting ionic groups are used to maintain a low Tg is shown to lead to flexible redox active polymers. The use of a flexible ethylene backbone and redox-active phenothiazine (PTZ)-based pendant group resulted in polymers with relatively low Tg that are electrically conductive. PTZ that was N-substituted with 2-(2-ethoxyethoxy)ethoxy)ethyl was found to promote solubility of the polymer and lower the Tg of the neutral polymer by ∼150 °C relative to that of the Tg of a variant without the N-substituent. Doping with trifluoromethanesulfonimide leads to an electrically conductive polymer without significantly increasing the Tg. Physical characterization by UV-vis-NIR spectroscopy, electron spin resonance spectroscopy, and impedance spectroscopy verified that the molecular design leads to an efficient charge hopping between the PTZ groups.Entities:
Keywords: charge transport; organic electronics; phenothiazine; polymeric ionic liquids; redox-active polymer
Year: 2021 PMID: 33480673 DOI: 10.1021/acsami.0c20462
Source DB: PubMed Journal: ACS Appl Mater Interfaces ISSN: 1944-8244 Impact factor: 9.229