Literature DB >> 32910817

3-Dimensional Printed Alternative to the Standard Synthetic Flocked Nasopharyngeal Swabs Used for Coronavirus Disease 2019 Testing.

Summer J Decker1, Todd A Goldstein2, Jonathan M Ford1, Michael N Teng1, Robert S Pugliese3, Gregory J Berry2, Matthew Pettengill3, Suzane Silbert4, Todd R Hazelton1, Jason W Wilson1, Kristy Shine3, Zi-Xuan Wang3, Morgan Hutchinson3, Joseph Castagnaro2, Ona E Bloom2, Dwayne A Breining2, Barbara M Goldsmith3, John T Sinnott1, Donna Gentile O'Donnell3, James M Crawford2, Charles J Lockwood1, Kami Kim1.   

Abstract

BACKGROUND: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus that causes coronavirus disease 2019 (COVID-19), can be detected in respiratory samples by real-time reverse transcriptase polymerase chain reaction (RT-PCR) or other molecular methods. Accessibility of diagnostic testing for COVID-19 has been limited by intermittent shortages of supplies required for testing, including flocked nasopharyngeal (FLNP) swabs.
METHODS: We developed a 3-dimensional printed nasopharyngeal (3DP) swab as a replacement of the FLNP swab. The performance of 3DP and FLNP swabs were compared in a clinical trial of symptomatic patients at 3 clinical sites (n = 291) using 3 SARS-CoV-2 emergency use authorization tests: a modified version of the Centers for Disease Control and Prevention (CDC) RT-PCR Diagnostic Panel and 2 commercial automated formats, Roche Cobas and NeuMoDx.
RESULTS: The cycle threshold-C(t)-values from the gene targets and the RNase P gene control in the CDC assay showed no significant differences between swabs for both gene targets (P = .152 and P = .092), with the RNase P target performing significantly better in the 3DP swabs (P < .001). The C(t) values showed no significant differences between swabs for both viral gene targets in the Roche cobas assay (P = .05 and P = .05) as well as the NeuMoDx assay (P = .401 and P = .484). The overall clinical correlation of COVID-19 diagnosis between all methods was 95.88% (Kappa 0.901).
CONCLUSIONS: The 3DP swabs were equivalent to standard FLNP in 3 testing platforms for SARS-CoV-2. Given the need for widespread testing, 3DP swabs printed onsite are an alternate to FLNP that can rapidly scale in response to acute needs when supply chain disruptions affect availability of collection kits.
© The Author(s) 2020. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Entities:  

Keywords:  SARS-CoV-2; 3D-printed swabs; COVID-19; molecular diagnostics; nasopharyngeal

Mesh:

Year:  2021        PMID: 32910817      PMCID: PMC7499529          DOI: 10.1093/cid/ciaa1366

Source DB:  PubMed          Journal:  Clin Infect Dis        ISSN: 1058-4838            Impact factor:   9.079


  6 in total

Review 1.  The Successes and Challenges of SARS-CoV-2 Molecular Testing in the United States.

Authors:  Jennifer Dien Bard; N Esther Babady
Journal:  Clin Lab Med       Date:  2022-03-08       Impact factor: 2.172

Review 2.  Tools and Techniques for Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)/COVID-19 Detection.

Authors:  Seyed Hamid Safiabadi Tali; Jason J LeBlanc; Zubi Sadiq; Oyejide Damilola Oyewunmi; Carolina Camargo; Bahareh Nikpour; Narges Armanfard; Selena M Sagan; Sana Jahanshahi-Anbuhi
Journal:  Clin Microbiol Rev       Date:  2021-05-12       Impact factor: 26.132

3.  3D printing of nasopharyngeal swabs for COVID-19 diagnose: Past and current trends.

Authors:  Aluri Manoj; Monami Bhuyan; Swarup Raj Banik; Mamilla Ravi Sankar
Journal:  Mater Today Proc       Date:  2020-11-25

Review 4.  Novel additive manufacturing applications for communicable disease prevention and control: focus on recent COVID-19 pandemic.

Authors:  Orcun Guvener; Abdullah Eyidogan; Cagdas Oto; Pinar Yilgor Huri
Journal:  Emergent Mater       Date:  2021-02-10

5.  Validation of 3D-Printed Swabs for Sampling in SARS-CoV-2 Detection: A Pilot Study.

Authors:  Celia Sánchez-Pérez; Ana María Espinosa-García; Verónica Bolaños-Suaréz; Alma Villalobos-Osnaya; José Antonio García-García; Alma De León-Hernández
Journal:  Ann Biomed Eng       Date:  2022-09-12       Impact factor: 4.219

Review 6.  The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic: A Comprehensive Review.

Authors:  Y C Niranjan; S G Channabasavanna; Shankar Krishnapillai; R Velmurugan; A Rajesh Kannan; Dhanesh G Mohan; Sasan Sattarpanah Karganroudi
Journal:  Materials (Basel)       Date:  2022-10-01       Impact factor: 3.748

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.