Literature DB >> 32831142

Risk estimation and prediction of the transmission of coronavirus disease-2019 (COVID-19) in the mainland of China excluding Hubei province.

Hui Wan1, Jing-An Cui2, Guo-Jing Yang3,4,5.   

Abstract

BACKGROUND: In December 2019, an outbreak of coronavirus disease (later named as COVID-19) was identified in Wuhan, China and, later on, detected in other parts of China. Our aim is to evaluate the effectiveness of the evolution of interventions and self-protection measures, estimate the risk of partial lifting control measures and predict the epidemic trend of the virus in the mainland of China excluding Hubei province based on the published data and a novel mathematical model.
METHODS: A novel COVID-19 transmission dynamic model incorporating the intervention measures implemented in China is proposed. COVID-19 daily data of the mainland of China excluding Hubei province, including the cumulative confirmed cases, the cumulative deaths, newly confirmed cases and the cumulative recovered cases between 20 January and 3 March 2020, were archived from the National Health Commission of China (NHCC). We parameterize the model by using the Markov Chain Monte Carlo (MCMC) method and estimate the control reproduction number (Rc), as well as the effective daily reproduction ratio- Re(t), of the disease transmission in the mainland of China excluding Hubei province.
RESULTS: The estimation outcomes indicate that Rc is 3.36 (95% CI: 3.20-3.64) and Re(t) has dropped below 1 since 31 January 2020, which implies that the containment strategies implemented by the Chinese government in the mainland of China are indeed effective and magnificently suppressed COVID-19 transmission. Moreover, our results show that relieving personal protection too early may lead to a prolonged disease transmission period and more people would be infected, and may even cause a second wave of epidemic or outbreaks. By calculating the effective reproduction ratio, we prove that the contact rate should be kept at least less than 30% of the normal level by April, 2020.
CONCLUSIONS: To ensure the pandemic ending rapidly, it is necessary to maintain the current integrated restrict interventions and self-protection measures, including travel restriction, quarantine of entry, contact tracing followed by quarantine and isolation and reduction of contact, like wearing masks, keeping social distance, etc. People should be fully aware of the real-time epidemic situation and keep sufficient personal protection until April. If all the above conditions are met, the outbreak is expected to be ended by April in the mainland of China apart from Hubei province.

Entities:  

Keywords:  COVID-19; Contact tracing; Control reproduction number; Effective daily reproduction ratio; Intervention measure; Mathematical model; Risk estimation and prediction

Mesh:

Year:  2020        PMID: 32831142      PMCID: PMC7443853          DOI: 10.1186/s40249-020-00683-6

Source DB:  PubMed          Journal:  Infect Dis Poverty        ISSN: 2049-9957            Impact factor:   4.520


Background

Coronaviruses are a group of enveloped viruses with a positive-sense, single-stranded RNA and viral particles resembling a crown, from which the name derives. They belong to the order of Nidovirales, family of Coronaviridae, and subfamily of Orthocoronavirinae [1]. In December 2019, an outbreak of coronavirus disease (later named as COVID-19 by WHO) was identified in Wuhan, China and, later on, detected in other parts of China. By 27 February, the new virus had infected 78 824 people and killed 2788 people in China [2]. Besides China, more than 4440 people had been infected and 67 died in at least 48 countries and regions [3]. Currently, there are no vaccines or anti-viral treatments officially approved for the prevention or management of the diseases. The outbreaks are still on-going [3]. The basic reproduction number R0 is the average number of secondary infections due to an infective case during the infectious period when everyone else in the population is susceptible [4]. While the basic reproduction number with control measures is defined as the control reproduction number R. At the early stage of the outbreak, estimation of R0/ R is crucial for determining the potential and severity of an outbreak, and providing precise information for designing and implementing disease outbreak responses, namely the identification of the most appropriate, evidence-based interventions, mitigation measures and the determination of the intensity of such programs in order to achieve the maximal protection of the population with the minimal interruption of social-economic activities [5, 6]. Recently, some papers have been released as pre-prints or undergone peer-review and published to estimate R0 and the risk of outbreak. Li et al. [7] analyzed data on the first 425 confirmed cases in Wuhan and determined the epidemiologic characteristics of COVID-19. Based on their estimates, the mean incubation period was 5.2 days, and R0 was 2.2, which is in line with the result estimated by Riou et al. [8]. Zhao et al. [9] assessed the unreported number of COVID-19 cases in China in the first half of January with the estimation of R0 2.56. Considering the impact of the variations in disease reporting rate, Zhao et al. [10] modelled the epidemic curve of COVID-19 cases, in the mainland of China from 10 January to 24 January 2020, through the exponential growth and concluded that the mean R0 ranged from 2.24 to 3.58 associated with 2-fold to 8-fold increase in the reporting rate. Li et al. [11] conducted a mathematical modeling study using five independent methods to assess R0 of COVID-19. Their results illustrated that R0 dropped from 4.38 to 3.41 right after the lockdown of Wuhan city. Over the epidemic period of the study COVID-19 had an average R0 of 3.39. Moreover, Tang et al. formulated a deterministic compartmental model. Their estimations based on likelihood and dynamical model analysis showed that R0 with control measures might be as high as 6.47 [6]. Most recently, Chen et al. [12] developed a Bats-Hosts-Reservoir-People transmission network model to simulate the potential transmission from the infectious sources to human. The estimated values of R0 were 2.30 from reservoir to person and 3.58 from person to person. We noticed that the estimations of R0 in varied studies are different. As mentioned in references of [6, 13], variability in the estimation of the basic reproduction number is a general recognized methodological issue, and standardized methods both for calculating and reporting R0 are still missing. Furthermore, the value of R0 may vary with key clinical parameters inferred from data which depend on the time period, quality, accuracy, and reliability. To better quantify the evolution of the interventions, Tang et al. fitted the previously proposed model in reference [6] to the data available until 29 January 2020 and re-estimated the effective daily reproduction [14]. There are also some literatures focusing on the prediction of COVID-19 development trend. Wang et al. formulated a complex network model and analyzed the possible time node and the risk impact of resumption on secondary outbreak in Wuhan and surrounding areas [15]. Roosa et al. [16] utilized several dynamic models to forecast the cumulative number of confirmed cases in the coming 5, 10, and 15 days in Hubei province, and the overall trajectory of the epidemic in China excluding Hubei. With the gradual alleviation of the epidemic situation in the mainland of China excluding Hubei province, considering the pressure of economic operation and the needs of people’s normal production and life, some places have adjusted the primary response of epidemic prevention and control to the secondary response [17]. In this situation, some critical questions need to be answered promptly. Does the reduction of the emergency response level mean that people can fully or partially relieve from self-production? When can people return back to normal life? The aim of this study is to evaluate the effectiveness of varied interventions and self-protection measures, estimate the risk of partial lifting control measures and predict the epidemic trend of the virus in the mainland of China excluding Hubei province by establishing a COVID-19 transmission model incorporating the intervention measures implemented and fitting the data obtained from the National Health Commission of China (NHCC).

Methods

Establishment of COVID-19 transmission dynamic model

Based on the clinical progression of the disease, epidemiological status of the individuals and intervention measures (including travel restriction, body temperature measurement, close contact tracing, self-isolation and protection, etc.), we propose a novel deterministic COVID-19 transmission model. We parameterize the model using data of the mainland of China excluding Hubei province obtained from NHCC, and estimate the control reproduction number as well as the effective daily reproduction ratio of the disease transmission. The population was grouped into various compartments, namely susceptible (S), exposed (E), infectious with symptoms (I), infectious but asymptomatic (A), isolated susceptible (Si), quarantined infected pending for confirmation (Q), hospitalized (H), and recovered (R). We assume that recovered individuals have immunity during the rest epidemic period. Let N(t)=S(t)+E(t)+I(t)+A(t)+R(t) be the total number of individuals in the free community. In order to fit the data, we explicitly generated additional two groups, i.e. the cumulative number of recovered R(t) and dead cases D(t) from hospital. The total number of cumulative reported cases is set to be T(t). All the state variables are summarized in Table 1.
Table 1

State variables and initial values in Model (1)

DefinitionsState variablesInitial valuesGewekeSource
Susceptible populationS(t)1 336 210 000[27]
Exposed populationE(t)501.230.92956MCMC
Symptomatic infected populationI(t)0.228390.95511MCMC
Asymptomatic infected populationA(t)991.290.81969MCMC
Isolated susceptible populationSi(t)0Data
Quarantined infected populationQ(t)0Data
Infected population in hospitalsH(t)21Data
Recovered populationR(t)240.760.63851MCMC
Recovered population from hospitalsRh(t)0Data
Cumulative number of dead cases in hospitalsD(t)0Data
Total number of reported casesT(t)21Data

MCMC Markov Chain Monte Carlo method; Data COVID-19 daily data excluding Hubei province archived from NHCC

State variables and initial values in Model (1) MCMC Markov Chain Monte Carlo method; Data COVID-19 daily data excluding Hubei province archived from NHCC Due to the travel restriction, migrations from/to Hubei province and other regions are ignored. Birth and natural death are also neglected. With the increase of the cumulative number of confirmed cases, the probability of contact transmission among the informed susceptible populations would certainly reduce ([18-20], etc.). To better quantify the varied interventions and self-protection measures, we assume the contact rate to be time-dependent c(t)=q1(t)c0, where c0 is the initial contact rate and q1(t) is the intervention coefficient with respect to contact. Here we assume that q1(t)=e−, which is dependent on the total number of cumulative confirmed cases T(t) and is monotone decreasing with T(t), so as to well reflect the impact of media coverage on people’s psychology and behaviors. c(t)=c0 for T=0 and It should be mentioned that the contact function c(t) in [14] is also assumed to be time-dependent, but it is not dependent on state variables. Let the transmission probability be β. Thus, the incidence rate can be given by where ξ is the correction factor of transmission probability with asymptomatic infectious individuals. By frequent monitoring of body temperature and diagnoses in hospitals, symptomatic infectious individuals can be detected. The detection rate is assumed to be q2I(t). Infected individuals in Q class can be confirmed at the rate of ηQ(t) by nucleic acid testing. Additionally, close contact tracing followed by quarantine and isolation is a critical control measure. We assume that, once a case is confirmed, q3 individuals would be traced. Therefore, q3(q2I(t)+ηQ(t)) individuals would be traced in a unit time, which is dependent on the number of new confirmed cases q2I(t)+ηQ(t). We also assume that, among these traced individuals, fraction parts are susceptible, fraction parts are exposed, fraction parts are infectious with symptoms and fraction parts are infectious but asymptomatic. fraction parts are recovered, which are not needed to be isolated due to protective immunity and will remain in the R class until the end of the epidemic. The disease transmission flow chart is depicted in Fig. 1 and other parameters are summarized in Table 2. Based on the above assumptions, we formulate the following model to describe the transmission dynamics of COVID-19.
Fig. 1

Flow chart of COVID-19 with intervention measures

Table 2

Definition of the parameters

InterpretationsParametersValuesGewekeSource
Probability of transmission per contactβ0.0540430.92594MCMC
Initial contact ratec040.3190.99203MCMC
Transition rate of exposed individualsϕ1/5.2[7]
to the infected class
Probability of having symptomsθ0.66280.91799MCMC
among infected individuals
Transition rate of quarantined infectedη17.3790.59129MCMC
individuals to hospital class
Recovery rate of symptomaticγI0.157960.7351MCMC
infectious individuals
Recovery rate of asymptomaticγA0.556710.99168MCMC
infected individuals
Recovery rate of quarantinedγH0.0353520.97782MCMC
infected individuals
Disease-induced death rated5.5888×10−40.98847MCMC
Correction factor of transmission probabilityξ0.809870.74505MCMC
with asymptomatic infectious individuals
Rate at which the quarantined uninfectedμ1/14[2]
contacts were released
Intervention coefficient with respectq1Assumption
to contact
Intervention parameter with respectq20.472180.9302MCMC
to patient detection
Intervention parameter with respectq32.69540.55476MCMC
to close contact tracing
Exponential decreasing rate of contact rateδ2.8286×10−40.99962MCMC

MCMC Markov Chain Monte Carlo method

Flow chart of COVID-19 with intervention measures Definition of the parameters MCMC Markov Chain Monte Carlo method According to the concept of next generation matrix in reference [21] and the basic reproduction number presented in reference [22], we calculate the basic reproduction number with control measures, i.e. the control reproduction number, R, of COVID-19, which is given by With the spreading of the COVID-19, intensive intervention measures have been implemented increasingly and people gradually enhanced self-protection. In order to quantity the daily reproduction number, inspired by Tang et al. [14], the initial contact rate c0 in the formula of R is replaced by the aforementioned time-dependent contact rate c(t) to reflect the changes of intervention measures and people’s behaviors. Thereby, we define as the effective daily reproduction ratio, the average number of new infections induced by a single infected individual during the infectious period at time t. The basic reproduction number or the control reproduction number, which is not time-dependent, can depict the transmission risk in the early phase of disease transmission. While the time-dependent effective daily reproduction ratio can evaluate the transmission risk changing over time.

Data source

COVID-19 daily data excluding Hubei province were archived from NHCC from 20 January (the first day of confirmed cases reported) to 3 March 2020 (Fig. 2) [2]. The data include the cumulative confirmed cases, the cumulative number of deaths, newly confirmed cases and the cumulative number of recovered cases. The data from 20 January to 24 February were fitted to parameterize the model and the data from 25 February to 3 March were used for comparison of the predicted curves and real data.
Fig. 2

Reported data of the mainland of China excluding Hubei

Reported data of the mainland of China excluding Hubei

Parameter estimation

We used the Markov Chain Monte Carlo (MCMC) method with an adaptive Metropolis-Hastings (M-H) algorithm to fit the model. The M-H algorithm, a powerful Markov chain method to simulate multivariate distributions, was executed by using the MCMC toolbox introduced in reference [23]. This toolbox provides tools to generate and analyze Metropolis-Hastings MCMC chains using multivariate Gaussian proposal distribution. The covariance matrix of the proposal distribution can be adapted during the simulation according to adaptive schemes described in references of [24-26]. The algorithm is run for 110 000 iterations with a burn-in of the first 80 000 iterations, and the Geweke convergence diagnostic method is employed to assess the convergence of chains. At the significance level of 5% (the critical value of z is 1.96), all parameters and initial values estimated do not reject the original hypothesis of convergence to a posterior distribution (Fig. 3).
Fig. 3

Posterior distribution (solid line) and prior distribution (dash line) of each parameter. x-axis is the parameter value, y-axis is the density

Posterior distribution (solid line) and prior distribution (dash line) of each parameter. x-axis is the parameter value, y-axis is the density

Simulations

The population of the mainland of China excluding Hubei province is around 1 336 210 000 [27], which can be set to be the value of S(0). 21 confirmed cases were reported on 20 January 2020 for the first time and the numbers of recovered and dead individuals were both 0. It can be assumed that nobody has been traced at the beginning. Therefore, we set S(0)=Q(0)=R(0)=D(0)=0, and H(0)=T(0)=21. The quarantined susceptible individuals were isolated for 14 days, thus μ=1/14 [2]. According to reference [7], the incubation period of COVID-19 is about 5.2 days, thus ϕ can be set to be 1/5.2.

Results

It can be seen that our model yields a relatively good visual fit to the epidemic curves (see Fig. 4). The MCMC estimation results of each parameters and initial values of some state variables are given in Tables 1 and 2. By fitting the data, we estimated the control reproduction number R to be 3.36 (95% CI: 3.20–3.64).
Fig. 4

Data fitting and prediction. The abscissa axis is the time. The shaded area is the 95% confidence interval region; The blue solid line is the result of the date fitting; The red stars are the real data. a Cumulative confirmed cases; b Cumulative dead cases from hospitals; c Cumulative recovered cases; d The number of new cases; e The number of hospitalized individuals; f The number of infectious individuals

Data fitting and prediction. The abscissa axis is the time. The shaded area is the 95% confidence interval region; The blue solid line is the result of the date fitting; The red stars are the real data. a Cumulative confirmed cases; b Cumulative dead cases from hospitals; c Cumulative recovered cases; d The number of new cases; e The number of hospitalized individuals; f The number of infectious individuals Using the estimated parameter values and the number of cumulative cases T(t), the effective daily reproduction ratio R(t) can be calculated (Fig. 5). The result demonstrates that R(t) has dropped sharply from 3.34 (R(1)=3.34) on 20 January to 0.89 (R(12)=0.89, less than 1) on 31 January 2020, which implies that the integrated control strategies implemented in the mainland of China excluding Hubei has successfully reduced transmission intensity and prevented the epidemic growth in a short time frame.
Fig. 5

Effective reproduction number

Effective reproduction number Under the current rigorous integrated control and self-protection measures, the time series of T(t) depicted in Fig. 4a shows that the cumulative number of confirmed cases will continue growing slowly for some duration and tend to its predicted maximum, which is 13 155. Besides, although the number of hospitalized individuals has peaked on around 12 February 2020, but it will not shrink to zero in the near future (Fig. 4e). Obviously, once people start relieving self-isolation and protection, new infections would occur given the existence of undetected infectious individuals. It is the number of undetected infectious individuals that determines when people’s lives are able to return back to normal. Hence we should closely follow the total number of I(t) and R(t). Fig. 4f displays that the number of infectious individuals has been decreasing gradually since the end of January. However, it will not descent down to 1 until late March, which infers that people should be fully aware of the real-time epidemic situation and keep personal protect before April. Using the estimated parameter values and the expression of the effective reproduction ratio R(t), the threshold value of the intervention coefficient with respect to contact, q1, can be calculated, which is 0.3. This implies that in order to block the continuous spread of the virus, the value of q1 must be less than 0.3 to guarantee R(t) is below 1. In other words, the contact rate should be kept below 30% of the normal level. To examine the impact of partial lifting control measures and personal protection, we plot the predicted time series of the number of cumulative confirmed cases, T(t), and the number of the infectious individuals, I(t)+A(t), with different contact rates (Fig. 6). Assuming that the adjusting time is from 5 March 2020, Figs. 6a and b illustrate that contact rate with 20% of the initial value c0 will not cause the disease re-bounce. However, the epidemic period will be extended for about 40 days until early May and the cumulative number of confirmed cases will increase by around 0.5% to 13 227. While if the starting time of the adjusting is postponed to 20 March, the epidemic time of disease will be extended for about one week and the cumulative number of confirmed cases will increase by only around 0.05% to 13 161, compared with the scenario of no changes. Nevertheless, if the contact rate is half of the initial value, i.e. q1=0.5 and R(t)=1.68, COVID-19 will re-bounce on a large scale in a short time frame, even if the starting time is postponed to 20 March. The corresponding analysis results are also listed in Table 3 for comparison.
Fig. 6

Comparison of scenarios with different contact rates. The abscissa axis is the time. The blue solid line is the case with no changes (q1=exp(−δT(t))); The purple dash line is the case with q1=0.2; The red dash-dot line is the case with q1=0.5. a–b Adjust the contact rate from 5 March 2020; c–d Adjust the contact rate from 20 March 2020

Table 3

The impact of partial lifting control measures and personal protection

Starting time of adjustmentMaximum of cumulative confirmed casesEpidemic period
No adjustment (c(t)=c0eδT(t))13 15570 days
5 March (c(t)=0.2c0)13 227110 days
5 March (c(t)=0.5c0)More than 447 millionMore than 365 days
20 March (c(t)=0.2c0)13 16177 days
20 March (c(t)=0.5c0)More than 445 millionMore than 365 days
Comparison of scenarios with different contact rates. The abscissa axis is the time. The blue solid line is the case with no changes (q1=exp(−δT(t))); The purple dash line is the case with q1=0.2; The red dash-dot line is the case with q1=0.5. a–b Adjust the contact rate from 5 March 2020; c–d Adjust the contact rate from 20 March 2020 The impact of partial lifting control measures and personal protection

Discussion

In this paper, we proposed a novel COVID-19 transmission model incorporating the intervention measures implemented in China. Particularly, we adopted two novel function forms which dynamically captured the real-time endemic situation. The first one is the contact rate, c(t), which was assumed to be dependent on the cumulative number of confirmed cases to better quantify the varied interventions and self-protection measures. The other one is the contact tracing function, which was dependent on the number of new cases. We evaluated the impact of partial lifting control measures on COVID-19 transmission. Our results show that relaxing self-protection too early may lead to a prolonged transmission period and more people would be infected, and may even cause the second wave of epidemic or outbreaks. The reduction of the emergency response level does not mean that people can be relaxed thoroughly. At least until the end of March, life will not be able to return to normal. In the process of recovery of production and life, we should pay attention to take protective measures to minimize the contact between people, such as wearing masks, keeping social distance, and avoiding crowded places to cut the risk of infection. By calculating the effective reproduction ratio, we assert that people’s contact rate should be kept below 30% of the normal level and the lower the better. Our study outcomes are based on the assumption of no imported cases from Hubei and other regions. However, new endemic foci outside China are formed, such as Republic of Korea, Italy, Iran, Japan, etc. The WHO recently upgraded the global risk of the epidemic to ‘very high’. Although the current endemic situation in China is under control, these newly formed epidemic foci could generate the risk of second outbreak wave due to imported cases via population migration cross border. With the development of the critical epidemic situation in other countries, it is very important to maintain and strengthen the quarantine of entry personnel. The impact of international mobility on the transmission of COVID-19 will be studied in our future works. We concentrated on the epidemic situation in the mainland of China excluding Hubei province is due to the significant differences of transmission dynamics between Wuhan, Hubei, and the rest of the country. In Wuhan, because of the sudden appearance of the disease, it took much longer time to recognize and understand the disease transmission than other regions. It requires certain time from unknown to known. Therefore, the data accuracy in Wuhan, Hubei is a major issue for parameters’ calibration. In addition, the sudden large outbreak in Wuhan, Hubei exhausted all medical resources in a short time. A more targeted model considering medical resource capacity will be anticipated in the future. Our results manifest that the model yields a good visual fit to the epidemic curve except for the cumulative recovered cases. The number of predicted recovered cases is less than the number of actual recovered individuals in the later period of data fitting. The possible reason is that the recovery rate of hospitalized individuals was increasing with the improvement of treatment level and the increase of medical resources. In addition, due to increased contact tracing efficiency, large quantity of mild symptomatic cases were detected and hospitalised which has higher recover rate than other classified cases. A time-dependent recovery rate may be more suitable to fit the real data. Furthermore, age is a key parameter determining the mortality and recover rates. It is ideal to set up age-structured agent-based or meta population-based deterministic models which can capture this important risk factor. In this work, the initial value of the susceptible class S(0) was set to be the population of the mainland of China excluding Hubei province. Actually, the number of susceptible individuals is not as many as this number considering the very strict control measures implemented and the difference of behaviors between different age groups. A proper method to estimate the accurate number of susceptible individuals should be studied in the future. Besides, the impact of limited medical resources is another important issue that is not incorporated in our model. The transmission dynamics of COVID-19 accounting for the potential negative effects of health systems being overwhelmed on mortality will be studied in our future work.

Conclusions

In conclusion, to ensure the COVID-19 pandemic ending rapidly, it is necessary to maintain the current integrated control intervention and self-protection measures, including travel restriction, quarantine of entry, contact tracing followed by quarantine and isolation and reduction of contact, like wearing masks, keeping social distance, etc. People should be fully aware of the real-time epidemic situation and keep sufficient personal protection until April. If all the above conditions are met, the outbreak is expected to be ended by April in the mainland of China apart from Hubei province.
  15 in total

1.  On the definition and the computation of the basic reproduction ratio R0 in models for infectious diseases in heterogeneous populations.

Authors:  O Diekmann; J A Heesterbeek; J A Metz
Journal:  J Math Biol       Date:  1990       Impact factor: 2.259

2.  The Threshold Infection Level for [Formula: see text] Invasion in a Two-Sex Mosquito Population Model.

Authors:  Dan Li; Hui Wan
Journal:  Bull Math Biol       Date:  2019-06-03       Impact factor: 1.758

Review 3.  The basic reproduction number (R0) of measles: a systematic review.

Authors:  Fiona M Guerra; Shelly Bolotin; Gillian Lim; Jane Heffernan; Shelley L Deeks; Ye Li; Natasha S Crowcroft
Journal:  Lancet Infect Dis       Date:  2017-07-27       Impact factor: 25.071

4.  The Impact of Media on the Control of Infectious Diseases.

Authors:  Jingan Cui; Yonghong Sun; Huaiping Zhu
Journal:  J Dyn Differ Equ       Date:  2007-05-18       Impact factor: 2.240

Review 5.  Epidemic Models of Contact Tracing: Systematic Review of Transmission Studies of Severe Acute Respiratory Syndrome and Middle East Respiratory Syndrome.

Authors:  Kin On Kwok; Arthur Tang; Vivian W I Wei; Woo Hyun Park; Eng Kiong Yeoh; Steven Riley
Journal:  Comput Struct Biotechnol J       Date:  2019-01-26       Impact factor: 7.271

6.  Early Transmission Dynamics in Wuhan, China, of Novel Coronavirus-Infected Pneumonia.

Authors:  Qun Li; Xuhua Guan; Peng Wu; Xiaoye Wang; Lei Zhou; Yeqing Tong; Ruiqi Ren; Kathy S M Leung; Eric H Y Lau; Jessica Y Wong; Xuesen Xing; Nijuan Xiang; Yang Wu; Chao Li; Qi Chen; Dan Li; Tian Liu; Jing Zhao; Man Liu; Wenxiao Tu; Chuding Chen; Lianmei Jin; Rui Yang; Qi Wang; Suhua Zhou; Rui Wang; Hui Liu; Yinbo Luo; Yuan Liu; Ge Shao; Huan Li; Zhongfa Tao; Yang Yang; Zhiqiang Deng; Boxi Liu; Zhitao Ma; Yanping Zhang; Guoqing Shi; Tommy T Y Lam; Joseph T Wu; George F Gao; Benjamin J Cowling; Bo Yang; Gabriel M Leung; Zijian Feng
Journal:  N Engl J Med       Date:  2020-01-29       Impact factor: 176.079

7.  Pattern of early human-to-human transmission of Wuhan 2019 novel coronavirus (2019-nCoV), December 2019 to January 2020.

Authors:  Julien Riou; Christian L Althaus
Journal:  Euro Surveill       Date:  2020-01

8.  An updated estimation of the risk of transmission of the novel coronavirus (2019-nCov).

Authors:  Biao Tang; Nicola Luigi Bragazzi; Qian Li; Sanyi Tang; Yanni Xiao; Jianhong Wu
Journal:  Infect Dis Model       Date:  2020-02-11

9.  Preliminary estimation of the basic reproduction number of novel coronavirus (2019-nCoV) in China, from 2019 to 2020: A data-driven analysis in the early phase of the outbreak.

Authors:  Shi Zhao; Qianyin Lin; Jinjun Ran; Salihu S Musa; Guangpu Yang; Weiming Wang; Yijun Lou; Daozhou Gao; Lin Yang; Daihai He; Maggie H Wang
Journal:  Int J Infect Dis       Date:  2020-01-30       Impact factor: 3.623

10.  Real-time forecasts of the COVID-19 epidemic in China from February 5th to February 24th, 2020.

Authors:  K Roosa; Y Lee; R Luo; A Kirpich; R Rothenberg; J M Hyman; P Yan; G Chowell
Journal:  Infect Dis Model       Date:  2020-02-14
View more
  15 in total

1.  A review of mathematical modeling, artificial intelligence and datasets used in the study, prediction and management of COVID-19.

Authors:  Youssoufa Mohamadou; Aminou Halidou; Pascalin Tiam Kapen
Journal:  Appl Intell (Dordr)       Date:  2020-07-06       Impact factor: 5.086

2.  The Impact of Lockdown, Patient Classification, and the Large-Scale Case Screening on the Spread of the Coronavirus Disease 2019 (COVID-19) in Hubei.

Authors:  Shengtao Wang; Yan Li; Ximei Wang; Yuanyuan Zhang; Yiyi Yuan; Yong Li
Journal:  Biomed Res Int       Date:  2022-05-06       Impact factor: 3.246

3.  Environmental impacts of new Coronavirus outbreak in Iran with an emphasis on waste management sector.

Authors:  Ali Daryabeigi Zand; Azar Vaezi Heir
Journal:  J Mater Cycles Waste Manag       Date:  2020-10-03       Impact factor: 3.579

4.  Analysis and prediction of COVID-19 epidemic in South Africa.

Authors:  Wei Ding; Qing-Guo Wang; Jin-Xi Zhang
Journal:  ISA Trans       Date:  2021-01-28       Impact factor: 5.911

5.  Efficacy of the combination of modern medicine and traditional Chinese medicine in pulmonary fibrosis arising as a sequelae in convalescent COVID-19 patients: a randomized multicenter trial.

Authors:  Zhen-Hui Lu; Chun-Li Yang; Gai-Ge Yang; Wen-Xu Pan; Li-Guang Tian; Jin-Xin Zheng; Shan Lv; Shao-Yan Zhang; Pei-Yong Zheng; Shun-Xian Zhang
Journal:  Infect Dis Poverty       Date:  2021-03-18       Impact factor: 4.520

6.  Transmission dynamics of COVID-19 in Nepal: Mathematical model uncovering effective controls.

Authors:  Khagendra Adhikari; Ramesh Gautam; Anjana Pokharel; Kedar Nath Uprety; Naveen K Vaidya
Journal:  J Theor Biol       Date:  2021-03-24       Impact factor: 2.405

7.  Fractional order mathematical modeling of novel corona virus (COVID-19).

Authors:  Wasim Ahmad; Muhammad Sarwar; Kamal Shah; Ali Ahmadian; Soheil Salahshour
Journal:  Math Methods Appl Sci       Date:  2021-02-03       Impact factor: 3.007

8.  Development of a multivariable prediction model for severe COVID-19 disease: a population-based study from Hong Kong.

Authors:  Jiandong Zhou; Sharen Lee; Xiansong Wang; Yi Li; William Ka Kei Wu; Tong Liu; Zhidong Cao; Daniel Dajun Zeng; Keith Sai Kit Leung; Abraham Ka Chung Wai; Ian Chi Kei Wong; Bernard Man Yung Cheung; Qingpeng Zhang; Gary Tse
Journal:  NPJ Digit Med       Date:  2021-04-08

9.  Exponentially Increasing Trend of Infected Patients with COVID-19 in Iran: A Comparison of Neural Network and ARIMA Forecasting Models.

Authors:  Leila Moftakhar; Mozhgan Seif; Marziyeh Sadat Safe
Journal:  Iran J Public Health       Date:  2020-10       Impact factor: 1.429

Review 10.  Application of Big Data and Artificial Intelligence in COVID-19 Prevention, Diagnosis, Treatment and Management Decisions in China.

Authors:  Jiancheng Dong; Huiqun Wu; Dong Zhou; Kaixiang Li; Yuanpeng Zhang; Hanzhen Ji; Zhuang Tong; Shuai Lou; Zhangsuo Liu
Journal:  J Med Syst       Date:  2021-07-24       Impact factor: 4.460

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.