Literature DB >> 32312129

The role of additive manufacturing and antimicrobial polymers in the COVID-19 pandemic.

Jorge M Zuniga1, Aaron Cortes2.   

Abstract

Entities:  

Keywords:  3D printing; COVID-19; Novel corona virus; additive manufacturing; copper nanoparticles; medical devices

Year:  2020        PMID： 32312129      PMCID： PMC7196922          DOI： 10.1080/17434440.2020.1756771

Source DB:  PubMed          Journal:  Expert Rev Med Devices        ISSN： 1743-4440            Impact factor:   3.166


× No keyword cloud information.
  8 in total

1.  Neutralizing viruses in suspensions by copper oxide-based filters.

Authors:  Gadi Borkow; Robert W Sidwell; Donald F Smee; Dale L Barnard; John D Morrey; Humberto H Lara-Villegas; Yonat Shemer-Avni; Jeffrey Gabbay
Journal:  Antimicrob Agents Chemother       Date:  2007-04-30       Impact factor: 5.191

2.  Recent developments in anti-severe acute respiratory syndrome coronavirus chemotherapy.

Authors:  Dale L Barnard; Yohichi Kumaki
Journal:  Future Virol       Date:  2011-05       Impact factor: 1.831

Review 3.  Copper as a biocidal tool.

Authors:  Gadi Borkow; Jeffrey Gabbay
Journal:  Curr Med Chem       Date:  2005       Impact factor: 4.530

4.  A novel anti-influenza copper oxide containing respiratory face mask.

Authors:  Gadi Borkow; Steve S Zhou; Tom Page; Jeffrey Gabbay
Journal:  PLoS One       Date:  2010-06-25       Impact factor: 3.240

5.  In situ antimicrobial behavior of materials with copper-based additives in a hospital environment.

Authors:  Humberto Palza; Mauricio Nuñez; Roberto Bastías; Katherine Delgado
Journal:  Int J Antimicrob Agents       Date:  2018-02-19       Impact factor: 5.283

Review 6.  Antimicrobial polymers with metal nanoparticles.

Authors:  Humberto Palza
Journal:  Int J Mol Sci       Date:  2015-01-19       Impact factor: 5.923

7.  A single ventilator for multiple simulated patients to meet disaster surge.

Authors:  Greg Neyman; Charlene Babcock Irvin
Journal:  Acad Emerg Med       Date:  2006-08-02       Impact factor: 3.451

8.  Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1.

Authors:  Neeltje van Doremalen; Trenton Bushmaker; Dylan H Morris; Myndi G Holbrook; Amandine Gamble; Brandi N Williamson; Azaibi Tamin; Jennifer L Harcourt; Natalie J Thornburg; Susan I Gerber; James O Lloyd-Smith; Emmie de Wit; Vincent J Munster
Journal:  N Engl J Med       Date:  2020-03-17       Impact factor: 91.245
  8 in total
  21 in total

1.  Mechanical response assessment of antibacterial PA12/TiO2 3D printed parts: parameters optimization through artificial neural networks modeling.

Authors:  Nectarios Vidakis; Markos Petousis; Nikolaos Mountakis; Emmanuel Maravelakis; Stefanos Zaoutsos; John D Kechagias
Journal:  Int J Adv Manuf Technol       Date:  2022-05-21       Impact factor: 3.563

2.  Role of 3D printing for the protection of surgical and critical care professionals in the COVID-19 pandemic.

Authors:  J Pedraja; J M Maestre; J M Rabanal; C Morales; J Aparicio; I Del Moral
Journal:  Rev Esp Anestesiol Reanim (Engl Ed)       Date:  2020-08-11

3.  3D printing of nasopharyngeal swabs for COVID-19 diagnose: Past and current trends.

Authors:  Aluri Manoj; Monami Bhuyan; Swarup Raj Banik; Mamilla Ravi Sankar
Journal:  Mater Today Proc       Date:  2020-11-25

Review 4.  3D Printing to Support the Shortage in Personal Protective Equipment Caused by COVID-19 Pandemic.

Authors:  Mostapha Tarfaoui; Mourad Nachtane; Ibrahim Goda; Yumna Qureshi; Hamza Benyahia
Journal:  Materials (Basel)       Date:  2020-07-27       Impact factor: 3.623

Review 5.  A proposed insight into the anti-viral potential of metallic nanoparticles against novel coronavirus disease-19 (COVID-19).

Authors:  Ghadha Ibrahim Fouad
Journal:  Bull Natl Res Cent       Date:  2021-02-05

Review 6.  Cellulosic fiber nanocomposite application review with zinc oxide antimicrobial agent nanoparticle: an opt for COVID-19 purpose.

Authors:  Amizon Azizan; Aisyah Afiqah Samsudin; Minhalina Batrisyia Shamshul Baharin; Muhammad Harith Dzulkiflee; Nor Roslina Rosli; Noor Fitrah Abu Bakar; Muhammad Adlim
Journal:  Environ Sci Pollut Res Int       Date:  2022-01-27       Impact factor: 4.223

Review 7.  Antimicrobial Polymeric Structures Assembled on Surfaces.

Authors:  Iulia Babutan; Alexandra-Delia Lucaci; Ioan Botiz
Journal:  Polymers (Basel)       Date:  2021-05-12       Impact factor: 4.329

8.  Open source high-temperature RepRap for 3-D printing heat-sterilizable PPE and other applications.

Authors:  Noah G Skrzypczak; Nagendra G Tanikella; Joshua M Pearce
Journal:  HardwareX       Date:  2020-07-30

Review 9.  Sustainable Personal Protective Clothing for Healthcare Applications: A Review.

Authors:  Nazmul Karim; Shaila Afroj; Kate Lloyd; Laura Clarke Oaten; Daria V Andreeva; Chris Carr; Andrew D Farmery; Il-Doo Kim; Kostya S Novoselov
Journal:  ACS Nano       Date:  2020-09-24       Impact factor: 15.881

10.  Low-Cost Polyester-Tipped Three-Dimensionally Printed Nasopharyngeal Swab for the Detection of Severe Acute Respiratory Syndrome-Related Coronavirus 2 (SARS-CoV-2).

Authors:  Mohammad Alghounaim; Sulaiman Almazeedi; Sarah Al Youha; Jesse Papenburg; Osama Alowaish; Ghadeer AbdulHussain; Rawan Al-Shemali; Ahmad Albuloushi; Saud Alzabin; Khaled Al-Wogayan; Yousef Al-Mutawa; Salman Al-Sabah
Journal:  J Clin Microbiol       Date:  2020-10-21       Impact factor: 5.948
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.