| Literature DB >> 32293737 |
Marcus Raudner1,2, Markus M Schreiner3, Michael Weber1, Vladimir Juras1,2, David Stelzeneder3,4, Reinhard Windhager3, Siegfried Trattnig1,2.
Abstract
The aim of this study was to assess T2 values of the lumbar intervertebral discs in the axial and sagittal plane views and assess their respective interobserver reliability. The lumbar intervertebral discs of 23 symptomatic patients (11 female; 12 male; mean age, 44.1 ± 10.6; range, 24-64 years) were examined at 3T. Region-of-interest (ROI) analysis was performed on axial and sagittal T2 maps by two independent observers. Intraclass correlation coefficient (ICC) was assessed for every ROI. The interobserver agreement was excellent for the nucleus pulposus (NP) in the sagittal (0.951; 95% confidence interval [CI], 0.926-0.968) and axial (0.921; 95% CI, 0.845-0.955) planes. The posterior 20% region showed a higher ICC in the axial vs the sagittal assessment (0.845; 95% CI, 0.704-0.911 vs 0.819; 95% CI, 0.744-0.873). The same was true for the posterior 10%, with the axial ROI showing a higher ICC (0.923; 95% CI, 0.865-0.953 vs 0.628; 95% CI, 0.495-0.732). The intraobserver agreement was excellent for every ROI except the sagittal 10% region, which showed good performance (0.869; 95% CI, 0.813-0.909). The sagittal nucleus pulposus was the best-performing ROI with regard to intra- and interobserver agreement in the T2 assessment of the lumbar intervertebral disc. However, the axial NP showed more stable agreements overall and across the value range. In addition, the annular analysis showed better inter- and intraobserver agreement in the axial plane view. Clinical significance: Based on the presented analysis, we highly recommend that further studies use axial T2 mapping due to the higher intra- and interreader agreement.Entities:
Keywords: T2 mapping; degenerative disc disease; intervertebral disc; low back pain; magnetic resonance imaging
Mesh:
Year: 2020 PMID: 32293737 PMCID: PMC7496420 DOI: 10.1002/jor.24691
Source DB: PubMed Journal: J Orthop Res ISSN: 0736-0266 Impact factor: 3.494
MR sequence parameters; no interslice gap is given for the axial T2 mapping sequence, as only one slice per disc was acquired
| T1w TSE sag | T2w TSE sag | T2w TSE axial | T2w TSE cor | T2w TSE STIR sag | T2 map sag | T2 map axial | |
|---|---|---|---|---|---|---|---|
| Time to repetition, ms | 900 | 4400 | 5080 | 4500 | 3500 | 1200 | 1200 |
| Time to echo, ms | 8.3 | 105 | 94 | 105 | 35 | 13.8; 27.6; 41.4; 55.2; 69.0; 82.8 | 13.8; 27.6; 41.4; 55.2; 69.0; 82.8 |
| Field of view, mm | 300 × 300 | 280 × 280 | 210 × 210 | 280 × 280 | 300 × 300 | 220 × 220 | 220 × 220 |
| Matrix size | 320 × 320 | 320 × 320 | 384 × 384 | 320 × 320 | 320 × 320 | 256 × 256 | 256 × 256 |
| Voxel size, mm | 0.9 × 0.9 | 0.9 × 0.9 | 0.7 × 0.7 | 0.9 × 0.9 | 0.9 × 0.9 | 0.9 × 0.9 | 0.9 × 0.9 |
| Slice thickness, mm | 3 | 3 | 3 | 3 | 4.0 | 5 | 3 |
| Interslice gap, mm | 0.3 | 0.3 | 0.3 | 0.3 | 0.4 | 1 | n/a |
| Number of slices | 15 | 15 | 8 × 5 | 15 | 15 | 10 | 5 |
| Scan time, min:s | 03:23 | 01:34 | 06:16 | 01:36 | 3:25 | 07:41 | 07:41 |
Abbreviation: MR, magnetic resonance.
Figure 1Axial disc evaluation and region‐of‐interest (ROI) placement. 1: Anterior annulus fibrosus – discarded in this evaluation, but used as a placeholder for reproducibility; 2: nucleus pulposus; 3: posterior annular 20% region; 4: posterior annular 10% region. ROIs 1, 3, and 4 were drawn with a width of 11 mm to match the sagittal assessment of the annular region [Color figure can be viewed at wileyonlinelibrary.com]
Figure 2Sagittal disc evaluation and region‐of‐interest (ROI) placement. 1: Anterior annulus fibrosus (AF) – discarded in this evaluation, but used as a placeholder for reproducibility; 2‐4: nucleus pulposus (NP) – assessed separately to avoid artifacts or other sources of false values, and aggregated later; 5: posterior annular 20% region, and 6: posterior annular 10% region. Since two central sagittal slices were assessed, the thickness of the evaluated disc area was 5 mm + 5 mm + 1 mm gap, resulting in the central 11 mm of the examined discs being used for the quantitative evaluation [Color figure can be viewed at wileyonlinelibrary.com]
Mean values per ROI for both readers ± SD with the calculation of two‐way mixed absolute agreement ICC with 95% CI
| Reader 1 | Reader 2 | Reader 1 2nd read | Interrater reliability (ICC) | Intrarater reliability (ICC) reader 1 | |
|---|---|---|---|---|---|
| Sagittal NP | 103.7 ± 37.4 | 107.0 ± 41.9 | 104.0 ± 35.7 | 0.951 (0.926‐0.968) | 0.973 (0.961‐0.982) |
| Axial NP | 95.0 ± 25.2 | 99.7 ± 30.2 | 95.3 ± 25.9 | 0.921 (0.845‐0.955) | 0.966 (0.951‐0.976) |
| Sag posterior 20% | 59.3 ± 14.8 | 60.6 ± 13.5 | 58.4 ± 16.0 | 0.819 (0.744‐0.873) | 0.920 (0.884‐0.945) |
| Axial posterior 20% | 53.0 ± 10.5 | 55.9 ± 11.6 | 53.2 ± 11.3 | 0.845 (0.704‐0.911) | 0.924 (0.892‐0.947) |
| Sag posterior 10% | 46.4 ± 8.0 | 46.4 ± 8.7 | 45.9 ± 9.5 | 0.628 (0.495‐0.732) | 0.869 (0.813‐0.909) |
| Axial posterior 10% | 46.6 ± 11.3 | 48.4 ± 11.9 | 46.1 ± 11.1 | 0.923 (0.865‐0.953) | 0.936 (0.909‐0.956) |
Abbreviations: CI, confidence interval; ICC, Intraclass correlation coefficient; NP, nucleus pulposus; ROI, region‐of‐interest.
Figure 3Comparison of morphological T2w images and color‐coded T2 map overlay in the axial and sagittal planes: A and B, normal L4/L5 disc (axial) and sagittal overview; C and D, axial: normal L5/S1 disc and sagittal overview; E and F, axial: severely degenerated L3/L4 disc with lateral protrusion, which is not seen on the sagittal overview and could be missed depending on the number of slices; G and H, severely degenerated L5/S1 disc with posterior protrusion and annular tear, better depicted in the axial plane view [Color figure can be viewed at wileyonlinelibrary.com]