Literature DB >> 32031083

The bioprinting roadmap.

Wei Sun1, Binil Starly, Andrew C Daly, Jason A Burdick, Jürgen Groll, Gregor Skeldon, Wenmiao Shu, Yasuyuki Sakai, Marie Shinohara, Masaki Nishikawa, Jinah Jang, Dong-Woo Cho, Minghao Nie, Shoji Takeuchi, Serge Ostrovidov, Ali Khademhosseini, Roger D Kamm, Vladimir Mironov, Lorenzo Moroni, Ibrahim T Ozbolat.   

Abstract

This bioprinting roadmap features salient advances in selected applications of the technique and highlights the status of current developments and challenges, as well as envisioned advances in science and technology, to address the challenges to the young and evolving technique. The topics covered in this roadmap encompass the broad spectrum of bioprinting; from cell expansion and novel bioink development to cell/stem cell printing, from organoid-based tissue organization to bioprinting of human-scale tissue structures, and from building cell/tissue/organ-on-a-chip to biomanufacturing of multicellular engineered living systems. The emerging application of printing-in-space and an overview of bioprinting technologies are also included in this roadmap. Due to the rapid pace of methodological advancements in bioprinting techniques and wide-ranging applications, the direction in which the field should advance is not immediately clear. This bioprinting roadmap addresses this unmet need by providing a comprehensive summary and recommendations useful to experienced researchers and newcomers to the field.

Entities:  

Year:  2020        PMID: 32031083     DOI: 10.1088/1758-5090/ab5158

Source DB:  PubMed          Journal:  Biofabrication        ISSN: 1758-5082            Impact factor:   9.954


  42 in total

1.  Composable microfluidic spinning platforms for facile production of biomimetic perfusable hydrogel microtubes.

Authors:  Ruoxiao Xie; Zhe Liang; Yongjian Ai; Wenchen Zheng; Jialiang Xiong; Peidi Xu; Yupeng Liu; Mingyu Ding; Jianyi Gao; Jiaping Wang; Qionglin Liang
Journal:  Nat Protoc       Date:  2020-12-14       Impact factor: 13.491

2.  High-Definition Single-Cell Printing: Cell-by-Cell Fabrication of Biological Structures.

Authors:  Pengfei Zhang; Adam R Abate
Journal:  Adv Mater       Date:  2020-11-18       Impact factor: 30.849

Review 3.  Development and Application of Three-Dimensional Bioprinting Scaffold in the Repair of Spinal Cord Injury.

Authors:  Dezhi Lu; Yang Yang; Pingping Zhang; Zhenjiang Ma; Wentao Li; Yan Song; Haiyang Feng; Wenqiang Yu; Fuchao Ren; Tao Li; Hong Zeng; Jinwu Wang
Journal:  Tissue Eng Regen Med       Date:  2022-06-29       Impact factor: 4.169

Review 4.  Bioprinted microvasculature: progressing from structure to function.

Authors:  Alexis J Seymour; Ashley D Westerfield; Vincent C Cornelius; Mark A Skylar-Scott; Sarah C Heilshorn
Journal:  Biofabrication       Date:  2022-02-23       Impact factor: 9.954

Review 5.  3D Bioprinting of Cell-Laden Hydrogels for Improved Biological Functionality.

Authors:  Sarah M Hull; Lucia G Brunel; Sarah C Heilshorn
Journal:  Adv Mater       Date:  2021-10-20       Impact factor: 30.849

6.  Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress.

Authors:  Sara Cristina Pedroza-González; Marisela Rodriguez-Salvador; Baruc Emet Pérez-Benítez; Mario Moisés Alvarez; Grissel Trujillo-de Santiago
Journal:  Int J Bioprint       Date:  2021-04-20

Review 7.  3D Tissue and Organ Printing-Hope and Reality.

Authors:  Assaf Shapira; Tal Dvir
Journal:  Adv Sci (Weinh)       Date:  2021-03-11       Impact factor: 16.806

8.  All-Inkjet-Printed 3D Alveolar Barrier Model with Physiologically Relevant Microarchitecture.

Authors:  Dayoon Kang; Ju An Park; Woojo Kim; Seongju Kim; Hwa-Rim Lee; Woo-Jong Kim; Joo-Yeon Yoo; Sungjune Jung
Journal:  Adv Sci (Weinh)       Date:  2021-03-08       Impact factor: 16.806

Review 9.  Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review.

Authors:  Ahmed Fatimi; Oseweuba Valentine Okoro; Daria Podstawczyk; Julia Siminska-Stanny; Amin Shavandi
Journal:  Gels       Date:  2022-03-14

Review 10.  In Vitro Strategies to Vascularize 3D Physiologically Relevant Models.

Authors:  Alessandra Dellaquila; Chau Le Bao; Didier Letourneur; Teresa Simon-Yarza
Journal:  Adv Sci (Weinh)       Date:  2021-08-05       Impact factor: 16.806

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.