| Literature DB >> 31898260 |
Aenne A Brielmann1, Denis G Pelli2,3.
Abstract
Can people track several pleasures? In everyday life, pleasing stimuli rarely appear in isolation. Yet, experiments on aesthetic pleasure usually present only one image at a time. Here, we ask whether people can reliably report the pleasure of either of two images seen in a single glimpse. Participants (N = 13 in the original; +25 in the preregistered replication) viewed 36 Open Affective Standardized Image Set (OASIS) images that span the entire range of pleasure and beauty. On each trial, the observer saw two images, side by side, for 200 ms. An arrow cue pointed, randomly, left, right, or bidirectionally. Left or right indicated which image (the target) to rate while ignoring the other (the distractor); bidirectional requested rating the combined pleasure of both images. In half the blocks, the cue came before the images (precuing). Otherwise, it came after (postcuing). Precuing allowed the observer to ignore the distractor, while postcuing demanded tracking both images. Finally, we obtained single-pleasure ratings for each image shown alone. Our replication confirms the original study. People have unbiased access to their felt pleasure from each image and the average of both. Furthermore, the variance of the observer's report is similar whether reporting the pleasure of one image or the average pleasure of two. The undiminished variance for reports of the average pleasure of two images indicates either that the underlying pleasure variances are highly correlated, or, more likely, that the variance arises in the common reporting process. In brief, observers can faithfully track at least two visual pleasures.Entities:
Keywords: Aesthetics; Ensemble perception; Glimpse; Pleasure
Mesh:
Year: 2020 PMID: 31898260 PMCID: PMC7093342 DOI: 10.3758/s13423-019-01695-6
Source DB: PubMed Journal: Psychon Bull Rev ISSN: 1069-9384
Fig. 1Time line for one example trial for the main experiment (a) and baseline ratings (b). a During the main experiment, participants were cued to rate either one of the images with an arrow pointing to the left (not shown), to the right (as shown), or to rate the combined pleasure of both images with a double-headed arrow (not shown)
Fig. 2Model predictions (a), data (b), and RMSE (c) for one-pleasure trials. a–b Heat maps show the predicted (a) and average (b) pleasure ratings for each possible combination of target and distractor pleasures. Each cell represents the average pleasure rating (a) or predicted rating (b) per target and distractor pleasure combination. Cooler colors indicate lower average ratings, warmer colors indicate higher ones. Note that the averaged data still take interindividual differences into account since target-pleasure and single-pleasure are assigned to each image according to the individual observer’s own ratings. Predictions for the partial averaging model are displayed for the average value of the weight parameter that was the best fit (setting the weight variable of equation (1) to w = 0.8). c Root mean square error averaged across observers for precued (white) and postcued (gray) trials. Error bars represent ±1 SEM. e–d Average predicted (filled red circles) and observed ratings (open black circles) for precued (d) and postcued trials (e). Each dot represents averaged values across the same target rating value
Fig. 3Model predictions (a), data (b), and RMSE (c) for combined-pleasure trials. a–b Heat maps show the predicted (a) and average (b) pleasure ratings for each possible combination of target and distractor pleasures. Note that the averaged data still take interindividual differences into account since target-pleasure and single-pleasure are assigned to each image according to the individual observer’s own ratings. Predictions for the compressive and expansive model are displayed for the average value of the best fitting parameters (a = 0.39 and b = 0.85 for the compressive model; a = −0.70 and b = 1.05 for the expansive model). c Root mean square error averaged across observers for precued (white) and postcued (gray) trials. Error bars represent ±1 SEM. e–d Average predicted (filled red circles) and observed ratings (open black circles) for precued (d) and postcued trials (e). Each dot represents averaged values across the same target rating value