Literature DB >> 31861970

Bioprinted Skin Recapitulates Normal Collagen Remodeling in Full-Thickness Wounds.

Adam M Jorgensen1, Mathew Varkey1, Anastasiya Gorkun1,2,3, Cara Clouse1, Lei Xu1, Zishuai Chou1, Sean V Murphy1, Joseph Molnar1,4, Sang Jin Lee1, James J Yoo1, Shay Soker1, Anthony Atala1.   

Abstract

Over 1 million burn injuries are treated annually in the United States, and current tissue engineered skin fails to meet the need for full-thickness replacement. Bioprinting technology has allowed fabrication of full-thickness skin and has demonstrated the ability to close full-thickness wounds. However, analysis of collagen remodeling in wounds treated with bioprinted skin has not been reported. The purpose of this study is to demonstrate the utility of bioprinted skin for epidermal barrier formation and normal collagen remodeling in full-thickness wounds. Human keratinocytes, melanocytes, fibroblasts, dermal microvascular endothelial cells, follicle dermal papilla cells, and adipocytes were suspended in fibrinogen bioink and bioprinted to form a tri-layer skin structure. Bioprinted skin was implanted onto 2.5 × 2.5 cm full-thickness excisional wounds on athymic mice, compared with wounds treated with hydrogel only or untreated wounds. Total wound closure, epithelialization, and contraction were quantified, and skin samples were harvested at 21 days for histology. Picrosirius red staining was used to quantify collagen fiber orientation, length, and width. Immunohistochemical (IHC) staining was performed to confirm epidermal barrier formation, dermal maturation, vascularity, and human cell integration. All bioprinted skin treated wounds closed by day 21, compared with open control wounds. Wound closure in bioprinted skin treated wounds was primarily due to epithelialization. In contrast, control hydrogel and untreated groups had sparse wound coverage and incomplete closure driven primarily by contraction. Picrosirius red staining confirmed a normal basket weave collagen organization in bioprinted skin-treated wounds compared with parallel collagen fibers in hydrogel only and untreated wounds. IHC staining at day 21 demonstrated the presence of human cells in the regenerated dermis, the formation of a stratified epidermis, dermal maturation, and blood vessel formation in bioprinted skin, none of which was present in control hydrogel treated wounds. Bioprinted skin accelerated full-thickness wound closure by promoting epidermal barrier formation, without increasing contraction. This healing process is associated with human cells from the bioprinted skin laying down a healthy, basket-weave collagen network. The remodeled skin is phenotypically similar to human skin and composed of a composite of graft and infiltrating host cells. Impact statement We have demonstrated the ability of bioprinted skin to enhance closure of full-thickness wounds through epithelialization and normal collagen remodeling. To our knowledge, this article is the first to quantify collagen remodeling by bioprinted skin in full-thickness wounds. Our methods and results can be used to guide further investigation of collagen remodeling by tissue engineered skin products to improve ongoing and future bioprinting skin studies. Ultimately, our skin bioprinting technology could translate into a new treatment for full-thickness wounds in human patients with the ability to recapitulate normal collagen remodeling in full-thickness wounds.

Entities:  

Keywords:  animal models; bioprinting; extracellular matrix; skin; tissue engineering; wound healing

Mesh:

Substances:

Year:  2020        PMID: 31861970      PMCID: PMC7249461          DOI: 10.1089/ten.TEA.2019.0319

Source DB:  PubMed          Journal:  Tissue Eng Part A        ISSN: 1937-3341            Impact factor:   3.845


  35 in total

1.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity.

Authors:  Hyun-Wook Kang; Sang Jin Lee; In Kap Ko; Carlos Kengla; James J Yoo; Anthony Atala
Journal:  Nat Biotechnol       Date:  2016-02-15       Impact factor: 54.908

2.  Design and fabrication of human skin by three-dimensional bioprinting.

Authors:  Vivian Lee; Gurtej Singh; John P Trasatti; Chris Bjornsson; Xiawei Xu; Thanh Nga Tran; Seung-Schik Yoo; Guohao Dai; Pankaj Karande
Journal:  Tissue Eng Part C Methods       Date:  2013-12-31       Impact factor: 3.056

3.  Effectiveness of Biobrane for treatment of partial-thickness burns in children.

Authors:  Aaron P Lesher; Ryan H Curry; Jill Evans; Valerie A Smith; Michael T Fitzgerald; Robert A Cina; Christian J Streck; Andre V Hebra
Journal:  J Pediatr Surg       Date:  2011-09       Impact factor: 2.545

4.  Evaluation of the use of prognostic information for the care of individuals with venous leg ulcers or diabetic neuropathic foot ulcers.

Authors:  Shanu K Kurd; Ole J Hoffstad; Warren B Bilker; David J Margolis
Journal:  Wound Repair Regen       Date:  2009 May-Jun       Impact factor: 3.617

5.  Cultured skin substitutes reduce requirements for harvesting of skin autograft for closure of excised, full-thickness burns.

Authors:  Steven T Boyce; Richard J Kagan; David G Greenhalgh; Petra Warner; Kevin P Yakuboff; Tina Palmieri; Glenn D Warden
Journal:  J Trauma       Date:  2006-04

Review 6.  Wound coverage technologies in burn care: novel techniques.

Authors:  Marc G Jeschke; Celeste C Finnerty; Shahriar Shahrokhi; Ludwik K Branski; Manuel Dibildox
Journal:  J Burn Care Res       Date:  2013 Nov-Dec       Impact factor: 1.845

Review 7.  Prevention and treatment of postburn scars and contracture.

Authors:  M C Robson; R A Barnett; I O Leitch; P G Hayward
Journal:  World J Surg       Date:  1992 Jan-Feb       Impact factor: 3.352

8.  Bioprinted amniotic fluid-derived stem cells accelerate healing of large skin wounds.

Authors:  Aleksander Skardal; David Mack; Edi Kapetanovic; Anthony Atala; John D Jackson; James Yoo; Shay Soker
Journal:  Stem Cells Transl Med       Date:  2012-10-29       Impact factor: 6.940

9.  Tissue engineering of human hair follicles using a biomimetic developmental approach.

Authors:  Hasan Erbil Abaci; Abigail Coffman; Yanne Doucet; James Chen; Joanna Jacków; Etienne Wang; Zongyou Guo; Jung U Shin; Colin A Jahoda; Angela M Christiano
Journal:  Nat Commun       Date:  2018-12-13       Impact factor: 14.919

10.  Microenvironmental reprogramming by three-dimensional culture enables dermal papilla cells to induce de novo human hair-follicle growth.

Authors:  Claire A Higgins; James C Chen; Jane E Cerise; Colin A B Jahoda; Angela M Christiano
Journal:  Proc Natl Acad Sci U S A       Date:  2013-10-21       Impact factor: 11.205

View more
  14 in total

1.  3D Bioprinted Highly Elastic Hybrid Constructs for Advanced Fibrocartilaginous Tissue Regeneration.

Authors:  João B Costa; Jihoon Park; Adam M Jorgensen; Joana Silva-Correia; Rui L Reis; Joaquim M Oliveira; Anthony Atala; James J Yoo; Sang Jin Lee
Journal:  Chem Mater       Date:  2020-09-25       Impact factor: 9.811

2.  Extrusion and Microfluidic-based Bioprinting to Fabricate Biomimetic Tissues and Organs.

Authors:  Elham Davoodi; Einollah Sarikhani; Hossein Montazerian; Samad Ahadian; Marco Costantini; Wojciech Swieszkowski; Stephanie Willerth; Konrad Walus; Mohammad Mofidfar; Ehsan Toyserkani; Ali Khademhosseini; Nureddin Ashammakhi
Journal:  Adv Mater Technol       Date:  2020-05-26

3.  Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress.

Authors:  Sara Cristina Pedroza-González; Marisela Rodriguez-Salvador; Baruc Emet Pérez-Benítez; Mario Moisés Alvarez; Grissel Trujillo-de Santiago
Journal:  Int J Bioprint       Date:  2021-04-20

4.  Future applications of 3D bioprinting: A promising technology for treating recessive dystrophic epidermolysis bullosa.

Authors:  Courtney M Popp; William C Miller; Cindy R Eide; Jakub Tolar
Journal:  Exp Dermatol       Date:  2021-11-07       Impact factor: 4.511

Review 5.  3D Bioprinting of Functional Skin Substitutes: From Current Achievements to Future Goals.

Authors:  Paula Gabriela Manita; Itxaso Garcia-Orue; Edorta Santos-Vizcaino; Rosa Maria Hernandez; Manoli Igartua
Journal:  Pharmaceuticals (Basel)       Date:  2021-04-14

Review 6.  3D Bioprinting in Skin Related Research: Recent Achievements and Application Perspectives.

Authors:  Anna Olejnik; Julia Anna Semba; Adam Kulpa; Aleksandra Dańczak-Pazdrowska; Jakub Dalibor Rybka; Justyna Gornowicz-Porowska
Journal:  ACS Synth Biol       Date:  2021-12-30       Impact factor: 5.110

Review 7.  Bioprinting Au Natural: The Biologics of Bioinks.

Authors:  Kelsey Willson; Anthony Atala; James J Yoo
Journal:  Biomolecules       Date:  2021-10-28

8.  Bioprinting and plastic compression of large pigmented and vascularized human dermo-epidermal skin substitutes by means of a new robotic platform.

Authors:  Luca Pontiggia; Ingmar Aj Van Hengel; Agnes Klar; Dominic Rütsche; Monica Nanni; Andreas Scheidegger; Sandro Figi; Ernst Reichmann; Ueli Moehrlen; Thomas Biedermann
Journal:  J Tissue Eng       Date:  2022-04-25       Impact factor: 7.940

Review 9.  3D Bioprinting: An Enabling Technology to Understand Melanoma.

Authors:  Samantha Fernandes; Cian Vyas; Peggy Lim; Rúben F Pereira; Amaya Virós; Paulo Bártolo
Journal:  Cancers (Basel)       Date:  2022-07-20       Impact factor: 6.575

Review 10.  Overview of Current Advances in Extrusion Bioprinting for Skin Applications.

Authors:  Arantza Perez-Valle; Cristina Del Amo; Isabel Andia
Journal:  Int J Mol Sci       Date:  2020-09-12       Impact factor: 5.923

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.