Literature DB >> 31776772

Chondrogenic phenotype in responses to poly(ɛ-caprolactone) scaffolds catalyzed by bioenzymes: effects of surface topography and chemistry.

Wasana Kosorn1, Morakot Sakulsumbat1, Tareerat Lertwimol1, Boonlom Thavornyutikarn1, Paweena Uppanan1, Surapol Chantaweroad1, Wanida Janvikul2.   

Abstract

Biodegradable poly(ε-caprolactone) (PCL) has been increasingly investigated as a promising scaffolding material for articular cartilage tissue repair. However, its use can be limited due to its surface hydrophobicity and topography. In this study, 3D porous PCL scaffolds fabricated by a fused deposition modeling (FDM) machine were enzymatically hydrolyzed using two different biocatalysts, namely Novozyme®435 and Amano lipase PS, at varied treatment conditions in a pH 8.0 phosphate buffer solution. The improved surface topography and chemistry of the PCL scaffolds were anticipated to ultimately boost the growth of porcine articular chondrocytes and promote the chondrogenic phenotype during cell culture. Alterations in surface roughness, wettability, and chemistry of the PCL scaffolds after enzymatic treatment were thoroughly investigated using several techniques, e.g., SEM, AFM, contact angle and surface energy measurement, and XPS. With increasing enzyme content, incubation time, and incubation temperature, the surfaces of the PCL scaffolds became rougher and more hydrophilic. In addition, Novozyme®435 was found to have a higher enzyme activity than Amano lipase PS when both were used in the same enzymatic treatment condition. Interestingly, the enzymatic degradation process rarely induced the deterioration of compressive strength of the bulk porous PCL material and slightly reduced the molecular weight of the material at the filament surface. After 28 days of culture, both porous PCL scaffolds catalyzed by Novozyme®435 and Amano lipase PS could facilitate the chondrocytes to not only proliferate properly, but also function more effectively, compared with the non-modified porous PCL scaffold. Furthermore, the enzymatic treatments with 50 mg of Novozyme®435 at 25 °C from 10 min to 60 min were evidently proven to provide the optimally enhanced surface roughness and hydrophilicity most significantly favorable for induction of chondrogenic phenotype, indicated by the greatest expression level of cartilage-specific gene and the largest production of total glycosaminoglycans.

Entities:  

Mesh:

Substances:

Year:  2019        PMID: 31776772     DOI: 10.1007/s10856-019-6335-6

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  27 in total

1.  Enhancement of chondrocyte proliferation, distribution, and functions within polycaprolactone scaffolds by surface treatments.

Authors:  Paweena Uppanan; Boonlom Thavornyutikarn; Wasana Kosorn; Pakkanun Kaewkong; Wanida Janvikul
Journal:  J Biomed Mater Res A       Date:  2014-11-20       Impact factor: 4.396

Review 2.  Surface modification of polyester biomaterials for tissue engineering.

Authors:  Yan-Peng Jiao; Fu-Zhai Cui
Journal:  Biomed Mater       Date:  2007-11-26       Impact factor: 3.715

Review 3.  Role of material surfaces in regulating bone and cartilage cell response.

Authors:  B D Boyan; T W Hummert; D D Dean; Z Schwartz
Journal:  Biomaterials       Date:  1996-01       Impact factor: 12.479

4.  PCL/PHBV blended three dimensional scaffolds fabricated by fused deposition modeling and responses of chondrocytes to the scaffolds.

Authors:  Wasana Kosorn; Morakot Sakulsumbat; Paweena Uppanan; Pakkanun Kaewkong; Surapol Chantaweroad; Jaturong Jitsaard; Kriskrai Sitthiseripratip; Wanida Janvikul
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2016-03-28       Impact factor: 3.368

Review 5.  Repair and tissue engineering techniques for articular cartilage.

Authors:  Eleftherios A Makris; Andreas H Gomoll; Konstantinos N Malizos; Jerry C Hu; Kyriacos A Athanasiou
Journal:  Nat Rev Rheumatol       Date:  2014-09-23       Impact factor: 20.543

6.  Comparison of epithelial and fibroblastic cell behavior on nano/micro-topographic PCL membranes produced by crystallinity control.

Authors:  Menemşe Gümüşderelioğlu; F Betül Kaya; Işıl Gerçek Beşkardeş
Journal:  J Colloid Interface Sci       Date:  2011-03-12       Impact factor: 8.128

7.  In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig.

Authors:  Dennis Rohner; Dietmar W Hutmacher; Tan Kim Cheng; Martin Oberholzer; Beat Hammer
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2003-08-15       Impact factor: 3.368

Review 8.  Articular cartilage repair: basic science and clinical progress. A review of the current status and prospects.

Authors:  E B Hunziker
Journal:  Osteoarthritis Cartilage       Date:  2002-06       Impact factor: 6.576

9.  Effect of microcavitary alginate hydrogel with different pore sizes on chondrocyte culture for cartilage tissue engineering.

Authors:  Lei Zeng; Yongchang Yao; Dong-An Wang; Xiaofeng Chen
Journal:  Mater Sci Eng C Mater Biol Appl       Date:  2013-09-13       Impact factor: 7.328

10.  Preparation of a functionally flexible, three-dimensional, biomimetic poly(L-lactic acid) scaffold with improved cell adhesion.

Authors:  Jose F Alvarez-Barreto; Mark C Shreve; Paul L Deangelis; Vassilios I Sikavitsas
Journal:  Tissue Eng       Date:  2007-06
View more
  1 in total

1.  3D printing of bio-instructive materials: Toward directing the cell.

Authors:  Piotr Stanisław Zieliński; Pavan Kumar Reddy Gudeti; Timo Rikmanspoel; Małgorzata Katarzyna Włodarczyk-Biegun
Journal:  Bioact Mater       Date:  2022-04-23
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.