Literature DB >> 12861610

In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig.

Dennis Rohner1, Dietmar W Hutmacher, Tan Kim Cheng, Martin Oberholzer, Beat Hammer.   

Abstract

Alloplastic materials offer a number of advantages over bone autografts in the reconstruction of craniofacial defects. These include: lack of donor site morbidity, unlimited quantities of available material, and the possibility to conform exactly to the defect. An ideal bioresorbable material would degrade slowly, and have osteoconductive properties to allow replacement and remodeling by osseous tissue. This is seldom observed, the materials instead being replaced by fibrous tissue. Polycaprolactone (PCL), an FDA-approved bioresorbable polymer, has several properties that might make it suitable for reconstruction of craniofacial defects. The technique of fused deposition modeling (FDM) allows for the fabrication of highly reproducible bioresorbable 3D scaffolds. The nature of the fully interconnected pore network might enhance vascular ingrowth and osteoconductive properties. It was hypothesized that coating the scaffolds in bone marrow might enhance bone formation due to the osteoinductive nature of the bone-marrow mesenchymal cells. This study aimed to test these hypotheses in the pig model. Defects measuring 2 x 2 cm were surgically created in each orbit of eight Yorkshire pigs. The orbits were divided into three groups: Group 1 (n=4), no reconstruction (control); Group 2 (n=6), reconstruction with no coated PCL scaffolds; and Group 3 (n=6) reconstruction with bone-marrow-coated PCL scaffolds. The results were evaluated at 3 months by histological and histomorphometric analyses. The defects in Group 1 were covered with fibrous scar tissue. The shape of the reconstructed area was insufficient. The defects in Groups 2 and 3 were reconstructed correctly. In Group 2 the noncoated scaffolds showed 4.5% of new bone formation compared with 14.1% in Group 3, which is statistically significant (p<0.05). The entirely interconnected 3D polycaprolactone scaffold seems to be a promising material. It induces the bone ingrowth required for reconstructing craniofacial and orbital defects. Further long-term evaluations of these PCL scaffolds must be made in order to confirm these conclusions. Copyright 2003 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12861610     DOI: 10.1002/jbm.b.10037

Source DB:  PubMed          Journal:  J Biomed Mater Res B Appl Biomater        ISSN: 1552-4973            Impact factor:   3.368


  24 in total

1.  Biocompatibility and biodegradation studies of PCL/β-TCP bone tissue scaffold fabricated by structural porogen method.

Authors:  Lin Lu; Qingwei Zhang; David Wootton; Richard Chiou; Dichen Li; Bingheng Lu; Peter Lelkes; Jack Zhou
Journal:  J Mater Sci Mater Med       Date:  2012-06-06       Impact factor: 3.896

Review 2.  Craniofacial tissue engineering by stem cells.

Authors:  J J Mao; W V Giannobile; J A Helms; S J Hollister; P H Krebsbach; M T Longaker; S Shi
Journal:  J Dent Res       Date:  2006-11       Impact factor: 6.116

3.  Bone regeneration mediated by biomimetic mineralization of a nanofiber matrix.

Authors:  Alvaro Mata; Yanbiao Geng; Karl J Henrikson; Conrado Aparicio; Stuart R Stock; Robert L Satcher; Samuel I Stupp
Journal:  Biomaterials       Date:  2010-05-15       Impact factor: 12.479

4.  Chondrogenic phenotype in responses to poly(ɛ-caprolactone) scaffolds catalyzed by bioenzymes: effects of surface topography and chemistry.

Authors:  Wasana Kosorn; Morakot Sakulsumbat; Tareerat Lertwimol; Boonlom Thavornyutikarn; Paweena Uppanan; Surapol Chantaweroad; Wanida Janvikul
Journal:  J Mater Sci Mater Med       Date:  2019-11-27       Impact factor: 3.896

5.  Porous silicon confers bioactivity to polycaprolactone composites in vitro.

Authors:  J R Henstock; U R Ruktanonchai; L T Canham; S I Anderson
Journal:  J Mater Sci Mater Med       Date:  2014-01-08       Impact factor: 3.896

6.  Design, construction and mechanical testing of digital 3D anatomical data-based PCL-HA bone tissue engineering scaffold.

Authors:  Qingqiang Yao; Bo Wei; Yang Guo; Chengzhe Jin; Xiaotao Du; Chao Yan; Junwei Yan; Wenhao Hu; Yan Xu; Zhi Zhou; Yijin Wang; Liming Wang
Journal:  J Mater Sci Mater Med       Date:  2015-01-18       Impact factor: 3.896

7.  Functional properties of cell-seeded three-dimensionally woven poly(epsilon-caprolactone) scaffolds for cartilage tissue engineering.

Authors:  Franklin T Moutos; Farshid Guilak
Journal:  Tissue Eng Part A       Date:  2010-04       Impact factor: 3.845

8.  Chondrogenic regeneration using bone marrow clots and a porous polycaprolactone-hydroxyapatite scaffold by three-dimensional printing.

Authors:  Qingqiang Yao; Bo Wei; Nancy Liu; Chenshuang Li; Yang Guo; Arya Nick Shamie; James Chen; Cheng Tang; Chengzhe Jin; Yan Xu; Xiuwu Bian; Xinli Zhang; Liming Wang
Journal:  Tissue Eng Part A       Date:  2015-04       Impact factor: 3.845

Review 9.  Micro/nanofabricated platforms for oral drug delivery.

Authors:  Cade B Fox; Jean Kim; Long V Le; Cameron L Nemeth; Hariharasudhan D Chirra; Tejal A Desai
Journal:  J Control Release       Date:  2015-08-02       Impact factor: 9.776

10.  Craniofacial surgery, from past pioneers to future promise.

Authors:  Derrick C Wan; Matthew D Kwan; Anand Kumar; James P Bradley; Michael T Longaker
Journal:  J Maxillofac Oral Surg       Date:  2010-04-24
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.