| Literature DB >> 31569442 |
Eleftherios Kellis1, Nikiforos Galanis2, Nikolaos Kofotolis3.
Abstract
Muscle strength imbalances around the knee are often observed in athletes after anterior cruciate ligament (ACL) surgery and hamstring muscle injury. This study examined three hamstrings-to-quadriceps (H:Q) strength ratio types (conventional, functional, and mixed) in thirteen female athletes with a history of hamstring injury, fourteen basketball players following ACL reconstruction and 34 controls. The conventional (concentric H:Q) peak torque ratio was evaluated at 120°·s-1 and 240°·s-1. The functional (eccentric hamstring to concentric quadriceps) torque ratio was evaluated at 120°·s-1. Finally, the mixed (eccentric hamstrings at 30°·s-1 to concentric quadriceps at 240°·s-1) torque ratio was calculated. Both ACL and the hamstring-injured groups showed a lower quadriceps and hamstrings strength compared with controls (p < 0.05). However, non-significant group differences in the H:Q ratio were found (p > 0.05). Isokinetic assessment of muscle strength may be useful for setting appropriate targets of training programs for athletes with a history of ACL surgery or hamstring strain. However, isokinetic evaluation of the H:Q ratio is not injury-specific and it does not vary between different methods of calculating the H:Q ratio.Entities:
Keywords: ACL; hamstring injury; isokinetic; mixed ratio; strength balance
Year: 2019 PMID: 31569442 PMCID: PMC6835705 DOI: 10.3390/sports7100214
Source DB: PubMed Journal: Sports (Basel) ISSN: 2075-4663
Mean (± SD) age and anthropometric characteristics of the control group (CG), the anterior cruciate ligament (ACL) and the hamstring–injured group (HIG).
| Variable | CG (N = 34) | ACL (N = 14) | HIG (N = 13) |
|---|---|---|---|
| Age (years) | 21.5 ± 2.5 | 21.9 ± 2.1 | 20.9 ± 1.7 |
| Height (cm) | 176.4 ± 4.4 | 181.0 ± 4.9 * | 173.9 ± 3.7 |
| Body mass (kg) | 77.0 ± 3.8 | 81.3 ± 3.9 * | 76.4 ± 3.9 |
* significantly different compared with the other groups, p < 0.05.
Figure 1Mean group values of concentric (HCON120) and eccentric (HECC120) hamstrings and concentric (QCON120) and eccentric (QECC120) quadriceps peak torque at an angular velocity of 120°·s−1 for the control group (CG), the ACL reconstruction group (ACL), and the hamstring injured group (HIG) (error bars indicate standard deviation, * significant different compared with the GG, p < 0.05).
Figure 2Mean group values of eccentric quadriceps (QECC30) and hamstrings (HECC30) peak torque at 30°·s−1 and concentric quadriceps (QCON240) and hamstrings (HCON240) peak torque at 240°·s−1 for the control group (CG), the ACL reconstruction group (ACL), and the hamstring injured group (HIG) (error bars indicate standard deviation, * significant different compared with the GG, p < 0.05).
Mean, standard error and 95% confidence intervals of the differences in each dependent variable between the control group and each of the ACL reconstruction group (ACL) and the hamstring injured group (HIG).
| Deficit | Mean Percentage Difference (95% Confidence Interval) | |
|---|---|---|
| Test Condition | ACL | HIG |
| QCON120 | 35.7 ± 7.5 (14.9–50.8) | 28.6 ± 7.3 (11.2–46.1) |
| HCON120 | 36.3 ± 9.6 (8.4–52.1) | 21.1 ± 8.7 (0.1–42.3) |
| QECC120 | 24.4 ± 9.1 (2.2–46.6) | 30.7 ± 8.9 (9.2–52.3) |
| HECC120 | 26.8 ± 9.9 (2.7–51.2) | 27.9 ± 9.8 (3.5–50.7) |
| QECC30 | 25.2 ± 8.2 (4.5–45.8) | 27.0 ± 8.5 (7.0–47.2) |
| HECC30 | 29.7 ± 8.5 (7.7–51.7) | 35.5 ± 8.8 (12.0–54.2) |
| QCON240 | 33.5 ± 8.9 (7.2–50.2) | 21.4 ± 8.6 (1.4–43.1) |
| HCON240 | 33.9 ± 10.1 (−2.1–46.2) | 18.3 ± 9.3 (−3.8–43.1) |
QCON120, HCON120 = concentric peak torque of quadriceps and hamstrings at 120°·s−1, QECC120, HECC120 = eccentric peak torque at 120°·s−1, QECC30, HECC30 = eccentric peak torque at 30°·s−1, QCON240, HCON240 = concentric peak torque at 240°·s−1.
Mean (± SD) group hamstrings to quadriceps peak torque ratio for the control group (CG), the ACL reconstruction group (ACL) and the hamstring–injured group (HIG). The conventional ratios were calculated at concentric angular velocities of 120°·s−1.
| Type of Ratio | CG (N = 34) | ACL (N = 14) | HIG (N = 13) |
|---|---|---|---|
| Conventional | |||
| HCON120/QCON120 | 0.62 ± 0.11 | 0.64 ± 0.09 | 0.68 ± 0.12 |
| HCON240/QCON240 | 0.63 ± 0.16 | 0.65 ± 0.07 | 0.69 ± 0.08 |
| Functional | |||
| HECC120/QECC120 | 0.88 ± 0.22 | 0.94 ± 0.17 | 0.99 ± 0.22 |
| Mixed | |||
| HECC30/QCON240 | 1.24 ± 0.23 | 1.25 ± 0.29 | 1.06 ± 0.11 |
HCON120/QCON120) and 240°·s−1 (HCON240/QCON240). The functional (HECC240/QCON120) was calculated at an angular velocity of 120°·s−1. Finally, the mixed ratio was estimated as the eccentric hamstring torque at 30°·s−1 to concentric quadriceps torque at 24°·s−1 (HECC30/QCON240).