Phosphine-Promoted [4 + 3] Annulation of Allenoate with Aziridines for Synthesis of Tetrahydroazepines: Phosphine-Dependent [3 + 3] and [4 + 3] Pathways.

In this manuscript, phosphine-dependent [3 + 3] and [4 + 3] annulation reactions of allenoate with aziridines were disclosed. The alkyldiphenylphosphine-promoted [4 + 3] annulation of allenoate with aziridines has been achieved under mild conditions, providing biologically interesting functionalized tetrahydroazepines in moderate to excellent yield with moderate to excellent regioselectivity and diastereoselectivity.

Nitrogen-containing heterocyclic compounds are widely present in biologically active natural products and synthetic pharmaceuticals. Among them, tetrahydropyridines which can be converted into pyridines and piperidines are intriguing synthetic targets due to their significant biological activities.[1] In addition, azepines are widely found as the core structure in a large number of compounds that possess important pharmaceutical activities. The compounds containing the azepine moiety are important targets in synthetic and medicinal chemistry.[2] Among these compounds (Fig. 1), azelastine is an effective and safe treatment agent for urticaria.[3] Meptazinol is a new opioid-type analgesic with mixed agonist/antagonist properties.[4] (−)-Balanol is a fungal metabolite with potent protein kinase C inhibitory properties.[5] An anticonvulsant, carbamazepine, is known to show incidences of cutaneous adverse drug reactions including Stevens–Johnson syndrome, toxic epidermal necrolysis and drug-induced hypersensitivity syndrome.[6] Epinastine is a potent antiallergic agent that not only has antihistaminic property but also provides antileukotriene, anti-PAF and antibradykinin activities.[7] The tetracyclic natural product, (−)-tetrapetalone A is a novel lipoxygenase inhibitor from Streptomyces sp.[8] Therefore, new synthetic methodologies for the synthesis of azepine derivatives have attracted much attention. Among various methods, the cycloaddition reactions are practical and efficient methods, and have been extensively investigated.

Fig. 1

Selected examples of biologically active azepine-containing heterocyclic compounds.

Nucleophilic phosphine-catalyzed cycloaddition reactions of allenoates have evolved as a very useful tool to access various complex ring systems of organic molecules.[9,10] Since Lu and coworkers reported the first phosphine-catalyzed [3 + 2] cycloaddition of allenoates with electron-deficient alkenes in 1995,[11] various types of cycloaddition reactions have been developed to afford different sizes of carbocycles or heterocycles.[9] In spite of these advances, developing new cycloaddition reaction of allenoates is still of great significance to construct novel ring frameworks with functional groups.

Aziridines are an important type of versatile building blocks for synthesis of diverse nitrogen-containing heterocyclic compounds and natural products.[12] In the presence of Lewis acid or organocatalyst, aziridines may undergo a ring-opening reaction through C–N bond cleavage and work as a masked 1,3-dipole to react with various dipolarophiles, giving diverse cycloadducts. Many Lewis acid or organocatalyst-mediated cycloaddition reactions such as [3 + 2],[13] [3 + 3],[14] [6 + 3][15] and [8 + 3][16] cycloaddition reactions involving aziridines have been reported. In 2009, Kwon reported the first PPh3-promoted [3 + 3] annulation of aziridines with α-substituted allenoates to generate highly functionalized tetrahydropyridines by release of SO2.[17] During the process, aziridines undergo a ring-opening reaction through the breakage of the C–N bond upon the attack of the zwitterionic adduct formed by the addition of PPh3 to an allenoate, and the resulting amide anion attacks the β-carbon of the allenoate after an intramolecular desulfonation to realize the [3 + 3] annulation (Scheme 1).[17] The reaction is operationally simple and produces highly functionalized tetrahydropyridines in good to excellent yields with high levels of diastereoselectivity. In theory, however, the amide anion without the desulonation could attack the γ-carbon of the allenoates to result in a [4 + 3] annulation (Scheme 1).[18] With this query in mind and our continuing interest in phosphine-catalyzed cycloaddition reactions,[19] we herein report the first alkyldiphenylphosphine-promoted [4 + 3] annulation of aziridines with an allenoate to afford functionalized tetrahydroazepines under simple and mild reaction conditions (Scheme 1).

Scheme 1

Phosphine-dependent [3 + 3] and [4 + 3] annulation of allenoate with aziridines.

As shown in Scheme 1, in our previous work, in the presence of Ph3P, aziridines and α-substituted allenoates performed [3 + 3] annulation in dichloromethane at room temperature. Through revisiting the catalyst screening, we found that alkyldiphenyl-phosphines can reverse the regioselectivity, leading to [4 + 3] annulation, as shown in Table 1. The best result for [4 + 3] annulation of aziridine 1a and allenoate 2 was obtained when 1 equivalent of EtPPh2 was added, with 93% yield of the cycloadducts, 92 : 8 of regioselectivity and 81 : 19 of diastereoselectivity (Table 1, entry 3). n-PrPPh2 is also an effective catalyst compared to PPh3, and gave similar result to that with EtPPh2 (entry 4). MePPh2, i-PrPPh2, n-BuPPh2, CyPPh2, DPPB, and DPPP gave good yield of cycloadducts with poor to moderate regioselectivity (entries 2, 5, 6, 8–11). t-BuPPh2 afforded much lower yield of cycloadducts although with excellent regio- and diastereoselectivity (100 : 0) (entry 7). Subsequently, the effect of solvents was evaluated with the model reaction using EtPPh2 as the catalyst. The results showed that the aprotic CH2Cl2 remained to be the best solvent, while MeOH gave excellent reaction selectivity but low yield of cycloadducts (entry 16). Other solvents, such as THF, CH3Cl, Cl(CH2)2Cl, and toluene afforded low to moderate yield of cyloadducts and lower reaction selectivity (entries 12–15). As such, CH2Cl2 was selected as the best solvent for the reaction. The relative configuration of the product 4a was determined by single-crystal X-ray analysis.[20]

Screening of the reaction conditionsa

Entry	Phosphine (mol%)	Solvent	Yieldb (%)	4a : 3ac	dr (trans : cis) for 4ac
1	PPh3 (100)	CH2Cl2	73	0 : 100	—
2	MePPh2 (100)	CH2Cl2	78	90 : 10	54 : 46
3	EtPPh2 (100)	CH2Cl2	93	92 : 8	81 : 19
4	n-PrPPh2 (100)	CH2Cl2	97	80 : 20	91 : 1
5	i-PrPPh2 (100)	CH2Cl2	35	63 : 37	100 : 0
6	n-BuPPh2 (100)	CH2Cl2	56	89 : 11	78 : 22
7	t-BuPPh2 (100)	CH2Cl2	21	100 : 0	100 : 0
8	CyPPh2 (100)	CH2Cl2	83	60 : 40	82 : 18
9	DPPB (100)	CH2Cl2	35	66 : 34	100 : 0
10	DPPB (50)	CH2Cl2	57	77 : 23	100 : 0
11	DPPP (50)	CH2Cl2	48	69 : 31	100 : 0
12	EtPPh2 (100)	Cl(CH2)2Cl	43	70 : 30	30 : 70
13	EtPPh2 (100)	CHCl3	44	73 : 27	62 : 38
14d	EtPPh2 (100)	Toluene	42	60 : 40	84 : 16
15d	EtPPh2 (100)	THF	66	85 : 15	80 : 20
16d	EtPPh2 (100)	MeOH	32	100 : 0	100 : 0

Unless otherwise stated, all reactions were performed using 0.125 mmol of 1a and 0.150 mmol of 2 in 5 mL of CH2Cl2 at room temperature for 48 h.

Sum of the isolated yields of 3a and 4a.

Ratio of isolated yields.

React time is 72 h. DPPB: 1,4-bis(diphenylphosphino)butane; DPPP: 1,3-bis(diphenylphosphino)propane.

Under the optimized conditions, the annulation reactions of different aryl substituted aziridines with diethyl 2-vinylidenesuccinate were evaluated (Table 2). In most cases, regardless of the electronic nature of the substituent of the aryl group, using EtPPh2 or n-PrPPh2 as the catalyst, moderate to good yield and moderate to good selectivity of cycloadducts were obtained, and the yields are usually lower than that having the simple phenyl ring. The position of substituents on the benzene ring seems to have no significant influence on reactivity and selectivity. For example, substituents such as 4-MeC6H4 and 2,4,6-Me3C6H2 gave the desired products 4d and 4g in similar yields (entries 4 and 7). The annulation reaction also worked well with 2-naphthyl substituted aziridine (1n), affording the corresponding product in 58% yield (entry 14). Unfortunately, the alkyl substituent gave no desired product, due to the weak electrophilic properties of alkyl aziridines. All these products (4) are new compounds.

Substrate scope with respect to aziridinesa

Entry	Ar in 1	R′PPh2	T/°C	Yieldb (%) of 4 + 3	4 : 3c	4	dr (trans : cis) for 4c
1	C6H5, 1a	EtPPh2	25	93	92 : 8	4a	81 : 19
2	2-MeC6H4, 1b	n-PrPPh2	25	65	66 : 34	4b	84 : 16
3	3-MeC6H4, 1c	n-PrPPh2	25	58	79 : 21	4c	71 : 29
4	4-MeC6H4, 1d	n-PrPPh2	20	72	88 : 12	4d	86 : 14
5	2,4-Me2C6H3, 1e	EtPPh2	25	96	92 : 8	4e	61 : 39
6	2,5-Me2C6H3, 1f	n-PrPPh2	20	46	93 : 7	4f	81 : 19
7	2,4,6-Me3C6H2, 1g	n-PrPPh2	25	77	82 : 18	4g	62 : 38
8	4-t-BuC6H4, 1h	n-PrPPh2	25	57	84 : 16	4h	78 : 22
9	2-FC6H4, 1i	n-PrPPh2	25	60	63 : 37	4i	75 : 25
10	3-FC6H4, 1j	n-PrPPh2	25	48	75 : 25	4j	88 : 12
11	4-FC6H4, 1k	n-PrPPh2	20	73	73 : 27	4k	70 : 30
12	2-ClC6H4, 1l	n-PrPPh2	25	78	77 : 23	4l	80 : 20
13	2-BrC6H4, 1m	n-PrPPh2	20	42	60 : 40	4m	72 : 28
14	2-Naphthyl, 1n	n-PrPPh2	25	58	81 : 19	4n	78 : 22

All of the reactions were performed using 0.125 mmol of 1a, 0.150 mmol of 2, and 0.125 mmol of catalyst in 5 mL of CH2Cl2 for 48 h.

Sum of the isolated yields of 3 and 4.

Ratio of isolated yields.

Two plausible pathways for the reactions of the aziridines 1 and the allenoate 2 are presented in Scheme 2. PPh3 and EtPPh2 or n-PrPPh2 were found to mainly lead to [3 + 3] and [4 + 3] annulations, respectively. The reaction starts with a nucleophilic addition of the catalyst to the allenoate 2. A subsequent proton transfer then occurs to neutralize the negative charge on the terminal γ-carbon atom of 5. The newly formed secondary carboanion 6 is nucleophilic, and may attack the electron-deficient C atom of the aziridine to give a zwitterionic intermediate 7. When PPh3 is used as catalyst, a proton transfer ensues to neutralize the negative charge on N atom and results in a primary carboanion 8. The formation of 8 may be followed by a desulfonylation step and the p-nitrophenyl group is migrated to the terminal γ-carbon, releasing a molecule of SO2 and leaving the negative charge on the N atom. A nucleophilic step then occurs to close the six-membered ring and the elimination of triphenylphosphine gives the [3 + 3] annulation product 3 with the catalyst being regenerated. Compared with PPh3, when alkyldiphenylphosphine is used as catalyst, the primary carboanion 11 isomerizes into intermediate 12, which performs a proton transfer from N atom to C atom to give the intermediate 13. The cyclization of 13 furnished the ylide 14, which undergoes a proton transfer to produce the intermediate 15. Through elimination of the phosphine, the β-phosphonium ester 15 was converted to the [4 + 3] annulation product 4. The carbon–carbon single bond between C4 and C5 in the intermediates 11, 12 and 13 might rotate, thus resulting in moderate diastereoselectivity.

Scheme 2

The stepwise pathways of the [3 + 3] and [4 + 3] annulation reactions.

Conclusions

In conclusion, we disclosed phosphine-dependent [3 + 3] and [4 + 3] annulations of allenoate with aziridines and developed the first phosphine-promoted [4 + 3] annulation involving aziridines. The reaction works efficiently under mild conditions to give functionalized tetrahydroazepines in moderate to excellent yield with moderate to excellent diastereoselectivity.

Experimental

General methods

All reactions were performed under N2 atmospheres in oven-dried glassware with magnetic stirring. Unless otherwise stated, all reagents were purchased from commercial suppliers and used without further purification. All solvents were purified and dried according to standard methods prior to use. Organic solutions were concentrated under reduced pressure on a rotary evaporator or an oil pump. Reactions were monitored through thin layer chromatography (TLC) on silica gel-precoated glass plates (0.25 mm thickness, silica gel). Chromatograms were visualized by fluorescence quenching with UV light at 254 nm. Flash column chromatography was performed using flash silica gel (200–300 mesh). 1H and 13C NMR spectra were recorded in CDCl3 using a 300 MHz NMR instrument (referenced internally to Me4Si). Data for 13C NMR spectra are reported in terms of chemical shift. Melting points were determined on a melting point apparatus.

Preparation of aziridines 1

The 2-aryl-1-(4-nitrobenzenesulfonyl) aziridines were prepared according to procedures described previously in the literature.[17]

Preparation of allenoate 2

The diethyl 2-vinylidenesuccinate 2 was prepared according to procedures described previously in the literature.[17]

General procedure for the annulation of aziridines 1 and allenoate 2

An oven-dried 10 mL flask was charged with diphenyl-ethylphosphine or diphenyl-n-propylphosphine (0.125 mmol), the N-4-nitrobenzenesulfonyl-protected aziridine (0.125 mmol), and CH2Cl2 (5 mL) at room temperature. After adding diethyl 2-vinylidenesuccinate (0.15 mmol) to this solution, the mixture was stirred at room temperature for 48 h. The reaction mixture was concentrated and the residue purified through flash column chromatography (EtOAc/hexane, 1 : 5) to afford the corresponding tetrahydroazepine product.

Diethyl trans-1-(4-nitrophenylsulfonyl)-3-phenyl-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4a)

Prepared according to the general procedure as described above catalyzed by EtPPh2 in 69% yield (43.3 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 132–133 °C; 1H NMR (300 MHz, CDCl3) δ 8.40–8.32 (m, 2H), 7.99–7.92 (m, 2H), 7.31–7.22 (m, 3H), 7.16 (dd, J = 7.5, 1.9 Hz, 2H), 7.08 (dd, J = 5.0, 2.7 Hz, 1H), 4.58–4.50 (m, 1H), 4.41–4.08 (m, 6H), 3.89–3.78 (m, 1H), 3.59 (dd, J = 5.0, 17.9 Hz, 1H), 2.90 (dd, J = 11.0, 14.3 Hz, 1H), 1.33 (t, J = 7.1 Hz, 3H), 1.18 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.5, 166.2, 150.3, 143.2, 140.4, 136.7, 130.3, 128.8, 128.5, 127.6, 127.4, 124.5, 61.9, 61.5, 51.3, 50.5, 46.9, 46.6, 14.12, 14.06; IR (film) νmax 3106, 2983, 2934, 2872, 1715, 1654, 1606, 1532, 1497, 1455, 1401, 1352, 1311, 1245.75, 1166, 1095, 1074, 1048, 1030, 978, 945, 908, 855, 766, 744, 702, 687, 617, 604, 590, 502, 463 cm−1; HRMS (ESI) calcd for C24H27N2O8S+ [M + H]+ 503.1483, found 503.1480.

Diethyl trans-1-(4-nitrophenylsulfonyl)-3-o-tolyl-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4b)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 36% yield (23.2 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 148–149 °C; 1H NMR (300 MHz, CDCl3) δ 8.44–8.28 (m, 2H), 8.04–7.84 (m, 2H), 7.23–7.16 (m, 1H), 7.16–7.08 (m, 2H), 7.07–7.04 (m, 1H), 6.91–6.88 (m, 1H), 4.70–4.64 (m, 1H), 4.62–4.54 (m, 1H), 4.34–4.21 (m, 2H), 4.21–4.05 (m, 3H), 3.75–3.68 (m, 1H), 3.64–3.57 (m, 1H), 2.93–2.85 (m, 1H), 2.50 (s, 3H), 1.34 (t, J = 7.1 Hz, 3H), 1.17 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.6, 166.1, 150.2, 143.3, 138.7, 136.8, 136.0, 130.9, 130.1, 128.4, 127.3, 126.3, 125.6, 124.5, 61.8, 61.5, 50.4, 50.3, 46.3, 42.2, 19.7, 14.1, 14.0; IR (film) νmax 3105, 2923, 2851, 1716, 1652, 1606, 1531, 1447, 1401, 1351, 1310, 1247, 1166, 1092, 1073, 1047, 1029, 978, 947, 913, 855, 757, 742, 686 cm−1; HRMS (ESI) calcd for C25H29N2O8S+ [M + H]+ 517.1639, found 517.1634.

Diethyl trans-1-(4-nitrophenylsulfonyl)-3-m-tolyl-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4c)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 33% yield (21.3 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 125–126 °C; 1H NMR (300 MHz, CDCl3) δ 8.40–8.30 (m, 2H), 8.07–7.92 (m, 2H), 7.17–7.12 (m, 1H), 7.10–7.01 (m, 2H), 7.00–6.90 (m, 2H), 4.58–4.51 (m, 1H), 4.36–4.01 (m, 6H), 3.85–3.78 (m, 1H), 3.58 (dd, J = 5.0, 17.9 Hz, 1H), 2.88 (dd, J = 11.1, 14.3 Hz, 1H), 2.28 (s, 3H), 1.33 (t, J = 7.1 Hz, 3H), 1.19 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.5, 166.2, 150.2, 143.2, 140.4, 138.4, 136.6, 130.4, 128.7, 128.5, 128.34, 128.30, 128.2, 124.5, 124.2, 61.9, 61.5, 51.3, 50.5, 46.9, 46.6, 21.3, 14.11, 14.09; IR (film) νmax 3106, 2982, 2932, 1715, 1653, 1607, 1532, 1447, 1401, 1351, 1311, 1253, 1166, 1093, 1074, 1049, 1029, 978, 947, 913, 856, 821, 795, 765, 742, 703, 686, 607, 463 cm−1; HRMS (ESI) calcd for C25H29N2O8S+ [M + H]+ 517.1639, found 517.1631.

Diethyl trans-1-(4-nitrophenylsulfonyl)-3-p-tolyl-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4d)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 54% yield (34.9 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 118–119 °C; 1H NMR (300 MHz, CDCl3) δ 8.38–8.33 (m, 2H), 8.05–7.87 (m, 2H), 7.19–6.91 (m, 5H), 4.60–4.46 (m, 1H), 4.39–4.06 (m, 6H), 3.84–3.77 (m, 1H), 3.62–3.54 (m, 1H), 2.92–2.83 (m, 11.0 Hz, 1H), 2.29 (s, 3H), 1.33 (t, J = 7.1 Hz, 3H), 1.20 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.5, 166.2, 150.2, 143.2, 137.4, 137.3, 136.6, 130.4, 129.4, 128.5, 127.2, 124.5, 61.8, 61.5, 51.4, 50.5, 46.7, 46.5, 21.0, 14.11, 14.06; IR (film) νmax 3105, 3057, 2984, 2960, 2927, 2853, 2307, 1715, 1655, 1607, 1533, 1516, 1464, 1447, 1402, 1351, 1310, 1266, 1167, 1093, 1074, 1049, 1029, 978, 946, 911, 880, 856, 819, 801, 742, 704, 687, 609, 590, 556, 522, 463 cm−1; HRMS (ESI) calcd for C25H29N2O8S+ [M + H]+ 517.1639, found 517.1630.

Diethyl trans-3-(2,4-dimethylphenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4e)

Prepared according to the general procedure as described above catalyzed by EtPPh2 in 54% yield (35.8 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 121–122 °C; 1H NMR (300 MHz, CDCl3) δ 8.39–8.33 (m, 2H), 7.98–7.92 (m, 2H), 7.11–7.08 (m, 1H), 7.01–7.00 (m, 1H), 6.87–6.84 (m, 1H), 6.79–6.76 (m, 1H), 4.67–4.50 (m, 2H), 4.31–4.21 (m, 2H), 4.20–4.09 (m, 2H), 4.07–4.06 (m, 1H), 3.73–3.55 (m, 2H), 2.87 (dd, J = 11.4, 14.2 Hz, 1H), 2.46 (s, 3H), 2.25 (s, 3H), 1.34 (t, J = 7.1 Hz, 3H), 1.19 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.7, 166.2, 150.2, 143.3, 136.9, 136.8, 135.8, 135.7, 131.6, 130.1, 128.4, 126.9, 125.5, 124.5, 61.8, 61.5, 50.44, 50.36, 46.5, 41.9, 20.8, 19.6, 14.1, 14.0; IR (film) νmax 2963, 2926, 2854, 1719, 1606, 1532, 1448, 1401, 1351, 1310, 1260, 1167, 1092, 1028, 978, 913, 855, 801, 754, 744, 686, 610, 463 cm−1; HRMS (ESI) calcd for C26H31N2O8S+ [M + H]+ 531.1796, found 531.1789.

Diethyl trans-3-(2,5-dimethylphenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4f)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 35% yield (23.2 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 130–131 °C; 1H NMR (300 MHz, CDCl3) δ 8.40–8.32 (m, 2H), 7.99–7.92 (m, 2H), 7.14–7.03 (m, 2H), 6.94–6.91 (m, 1H), 6.69–6.68 (m, 1H), 4.68–4.52 (m, 2H), 4.31–4.21 (m, 2H), 4.19–4.12 (m, 2H), 4.07–4.06 (m, 1H), 3.75–3.55 (m, 2H), 2.89 (dd, J = 11.5, 14.2 Hz, 1H), 2.45 (s, 3H), 2.17 (s, 3H), 1.34 (t, J = 7.1 Hz, 3H), 1.19 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.6, 166.2, 150.1, 143.2, 138.5, 136.8, 135.5, 132.7, 130.7, 130.1, 128.4, 127.9, 126.3, 124.4, 61.7, 61.4, 50.3, 46.3, 42.1, 20.9, 19.1, 14.02, 14.01; IR (film) νmax 2981, 2928, 1714, 1651, 1606, 1531, 1504, 1447, 1401, 1351, 1311, 1249, 1165, 1092, 1073, 1047, 977, 947, 913, 856, 831, 754, 739, 714, 686, 607 cm−1; HRMS (ESI) calcd for C26H31N2O8S+ [M + H]+ 531.1796, found 531.1790.

Diethyl trans-3-mesityl-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahy-dro-1H-azepine-4,5-dicarboxylate (trans-4g)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 39% yield (26.6 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow solid. Mp = 130–131 °C; 1H NMR (300 MHz, CDCl3) δ 8.44–8.24 (m, 2H), 8.03–7.86 (m, 2H), 7.05–7.02 (m, 1H), 6.84–6.81 (m, 2H), 4.47–4.39 (m, 1H), 4.33–4.05 (m, 5H), 3.97 (q, J = 7.1 Hz, 2H), 3.56–3.44 (m, 1H), 3.40–3.33 (m, 1H), 2.38 (s, 3H), 2.25 (s, 3H), 2.23 (s, 3H), 1.25 (t, J = 7.1 Hz, 3H), 1.10 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 172.5, 166.7, 150.2, 144.2, 136.9, 135.8, 134.0, 133.3, 131.0, 129.4, 128.3, 124.5, 61.5, 61.3, 49.2, 47.1, 46.9, 42.1, 21.2, 21.1, 20.6, 14.1, 13.8; IR (film) νmax 3105, 2982, 2936, 2872, 1730, 1655, 1608, 1532, 1448, 1401, 1350, 1310, 1246, 1165, 1096, 1030, 957, 928, 855, 754, 740, 686, 612, 579, 463 cm−1; HRMS (ESI) calcd for C27H33N2O8S+ [M + H]+ 545.1952, found 545.1929.

Diethyl trans-3-(4-tert-butylphenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4h)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 37% yield (25.8 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.42–8.26 (m, 2H), 8.00–7.86 (m, 2H), 7.37–7.19 (m, 2H), 7.10–7.07 (m, 3H), 4.57–4.51 (m, 1H), 4.38–4.06 (m, 6H), 3.85–3.78 (m, 1H), 3.62–3.54 (m, 1H), 2.92–2.84 (m, 1H), 1.32 (t, J = 7.1 Hz, 3H), 1.27 (s, 9H), 1.18 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.4, 166.2, 150.2, 143.2, 137.7, 136.8, 133.3, 132.7, 130.3, 128.6, 128.4, 127.7, 127.6, 126.4, 126.2, 126.0, 125.3, 124.5, 61.9, 61.6, 51.1, 50.5, 46.9, 46.6, 14.1, 14.0; IR (film) νmax 3105, 3061, 2982, 2936, 2872, 1715, 1654, 1604, 1531, 1446, 1401, 1351, 1310, 1249, 1166, 1093, 1074, 1048, 1029, 977, 946, 915, 900, 856, 822, 741, 686, 624, 607, 589, 479, 463 cm−1; HRMS (ESI) calcd for C28H35N2O8S+ [M + H]+ 559.2109, found 559.2106.

Diethyl trans-3-(2-fluorophenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4i)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 29% yield (18.9 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.42–8.32 (m, 2H), 8.00–7.92 (m, 2H), 7.25–7.18 (m, 1H), 7.18–6.96 (m, 4H), 4.66–4.58 (m, 1H), 4.53–4.47 (m, 1H), 4.28–4.13 (m, 5H), 3.84–3.77 (m, 1H), 3.70–3.62 (m, 1H), 3.05–2.96 (m, 1H), 1.31 (t, J = 7.1 Hz, 3H), 1.21 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.3, 166.2, 160.6 (d, J = 246.7 Hz), 150.3, 143.3, 136.6, 130.5, 129.2 (d, J = 8.5 Hz), 128.7 (d, J = 4.4 Hz), 128.5, 127.2 (d, J = 14.4 Hz), 124.5, 124.4 (d, J = 3.5 Hz), 115.9 (d, J = 22.7 Hz), 61.9, 61.6, 49.93, 49.90, 45.9, 40.6, 14.1; IR (film) νmax 3106, 2983, 2931, 1716, 1606, 1586, 1532, 1492, 1455, 1401, 1351, 1310, 1248, 1167, 1094, 1048, 1029, 979, 946, 913, 856, 818, 757, 744, 686 cm−1; HRMS (ESI) calcd for C24H26FN2O8S+ [M + H]+ 521.1388, found 521.1389.

Diethyl trans-3-(3-fluorophenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4j)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 32% yield (20.8 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.39–8.35 (m, 2H), 8.02–7.91 (m, 2H), 7.30–6.82 (m, 5H), 4.59–4.51 (m, 1H), 4.42–4.09 (m, 6H), 3.88–3.81 (m, 1H), 3.58 (dd, J = 18.0, 5.0 Hz, 1H), 2.90–2.82 (m, 1H), 1.34 (t, J = 7.1 Hz, 3H), 1.21 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.1, 166.0, 162.8 (d, J = 246.8 Hz), 150.3, 143.1, 142.9 (d, J = 7.0 Hz), 136.9, 130.3 (d, J = 8.3 Hz), 129.9, 128.4, 124.5, 123.1 (d, J = 2.8 Hz), 114.5 (d, J = 16.0 Hz), 114.2 (d, J = 16.8 Hz), 62.0, 61.6, 50.9, 50.6, 46.5, 46.2, 14.1, 14.0; IR (film) νmax 2983, 1719, 1590, 1532, 1449, 1351, 1253, 1167, 1095, 857, 742, 596 cm−1; HRMS (ESI) calcd for C24H26FN2O8S+ [M + H]+ 521.1388, found 521.1384.

Diethyl trans-3-(4-fluorophenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4k)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 37% yield (24.1 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.46–8.26 (m, 2H), 8.08–7.87 (m, 2H), 7.39–7.06 (m, 3H), 7.06–6.89 (m, 2H), 4.61–4.48 (m, 1H), 4.43–4.09 (m, 6H), 3.92–3.74 (m, 1H), 3.63–3.56 (m, 1H), 2.90–2.82 (m, 1H), 1.33 (t, J = 7.1 Hz, 3H), 1.20 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.3, 166.1, 162.1 (d, J = 246.5 Hz), 150.3, 143.1, 136.9, 136.2 (d, J = 3.3 Hz), 130.0, 129.0 (d, J = 8.0 Hz), 128.4, 124.54, 124.51, 115.6 (d, J = 21.3 Hz), 61.9, 61.6, 51.2, 50.5, 46.6, 46.1, 14.1, 14.0; IR (film) νmax 2983, 1717, 1606, 1532, 1511, 1352, 1244, 1166, 1092, 1048, 856, 743, 608 cm−1; HRMS (ESI) calcd for C24H26FN2O8S+ [M + H]+ 521.1388, found 521.1388.

Diethyl trans-3-(2-chlorophenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4l)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 48% yield (32.2 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.46–8.26 (m, 2H), 8.08–7.87 (m, 2H), 7.39–7.06 (m, 3H), 7.06–6.89 (m, 2H), 4.61–4.48 (m, 1H), 4.43–4.09 (m, 6H), 3.92–3.74 (m, 1H), 3.63–3.56 (m, 1H), 2.90–2.82 (m, 1H), 1.33 (t, J = 7.1 Hz, 3H), 1.20 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.2, 166.1, 150.3, 143.3, 138.0, 137.1, 133.9, 130.8, 130.2, 130.1, 128.8, 128.6, 128.5, 127.6, 127.1, 124.5, 61.9, 61.6, 50.2, 49.8, 45.7, 42.5, 14.0, 13.7; IR (film) νmax 2983, 1717, 1606, 1532, 1511, 1352, 1244, 1166, 1092, 1048, 856, 743, 608 cm−1; HRMS (ESI) calcd for C24H26ClN2O8S+ [M + H]+ 537.1093, found 537.1093.

Diethyl trans-3-(2-bromophenyl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4m)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 18% yield (13.1 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.48–8.22 (m, 2H), 8.10–7.86 (m, 2H), 7.60–7.57 (m, 1H), 7.22–6.93 (m, 4H), 4.97–4.91 (m, 1H), 4.57–4.51 (m, 1H), 4.38–4.02 (m, 5H), 3.90–3.83 (m, 1H), 3.68–3.61 (m, 1H), 2.85–2.77 (m, 1H), 1.34 (t, J = 7.1 Hz, 3H), 1.21 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.1, 166.1, 150.2, 143.2, 139.6, 137.3, 133.4, 129.9, 128.9, 128.5, 127.7, 127.6, 124.6, 124.5, 61.9, 61.6, 50.3, 49.9, 45.7, 45.2, 14.0; IR (film) νmax 3105, 2962, 2928, 2872, 1720, 1654, 1606, 1531, 1471, 1445, 1401, 1351, 1310, 1257, 1167, 1093, 1075, 1049, 1024, 979, 947, 913, 855, 763, 745, 734, 686, 666 cm−1; HRMS (ESI) calcd for C24H26BrN2O8S+ [M + H]+ 581.0588, found 581.0593.

Diethyl trans-3-(naphthalen-2-yl)-1-(4-nitrophenylsulfonyl)-2,3,4,7-tetrahydro-1H-azepine-4,5-dicarboxylate (trans-4n)

Prepared according to the general procedure as described above catalyzed by n-PrPPh2 in 36% yield (24.9 mg). It was purified by flash chromatography (20% EtOAc/PE) to afford pale-yellow semi-solid. 1H NMR (300 MHz, CDCl3) δ 8.43–8.23 (m, 2H), 8.03–7.88 (m, 2H), 7.84–7.67 (m, 3H), 7.62 (s, 1H), 7.50–7.39 (m, 2H), 7.31–7.22 (m, 1H), 7.14–7.12 (m, 1H), 4.60–4.50 (m, 2H), 4.32–4.25 (m, 3H), 4.14 (q, J = 7.1 Hz, 2H), 3.94–3.87 (m, 1H), 3.68–3.61 (m, 1H), 3.09–3.00 (m, 1H), 1.34 (t, J = 7.1 Hz, 3H), 1.14 (t, J = 7.1 Hz, 3H); 13C NMR (75 MHz, CDCl3) δ 171.4, 166.2, 150.2, 143.2, 137.7, 136.8, 133.3, 132.7, 130.3, 128.6, 128.4, 127.7, 127.6, 126.4, 126.2, 126.0, 125.3, 124.5, 61.9, 61.6, 51.1, 50.5, 46.9, 46.6, 14.1, 14.0; IR (film) νmax 3105, 3061, 2982, 2936, 2872, 1715, 1654, 1604, 1531, 1446, 1401, 1351, 1310, 1249, 1166, 1093, 1074, 1048, 1029, 977, 946, 915, 900, 856, 822, 741, 686, 624, 607, 589, 479, 463 cm−1; HRMS (ESI) calcd for C28H29N2O8S+ [M + H]+ 553.1639, found 553.1631.

Conflicts of interest

There are no conflicts to declare.