Batch experiments towards remediation of phenolic syntan using individual as well as co-culture of Bacillus cereus and Pseudomonas aeruginosa.

The presence of very high concentrations of organic pollutants, phenols, tannins and heavy metals mainly chromium in wastewater discharged from leather industries, tags it as one of the most polluting industries. The phenolic syntans discharged from tanning units have an adverse effect on living organisms and cause serious environmental pollution, thereby making it very imperative to remove it. Among various treatment methods available for removal of phenols, biodegradation is environment friendly. The present study aims at the remediation of phenolic syntan used in the leather industry employing individual as well as co-culture of Bacillus cereus and Pseudomonas aeruginosa at varying syntan concentration in the medium. Parameters such as chemical oxygen demand (COD), total organic carbon (TOC), total phenol content (TPC) and Fourier Transform Infrared Spectroscopy (FTIR) indicating biodegradation were analyzed. Promising results were observed with P. aeruginosa, which exhibited a reduction in TPC by 62-72% in all the concentrations of syntan tested just within 12 h of inoculation, whereas about 67 and 83% reduction in COD and TOC respectively was observed for 2000 ppm concentration at the end of 5 days. B. cereus also demonstrated very good reduction in the above parameters however; percentage was less as compared to P. aeruginosa. In the case of co-culture, the TPC reduction was higher than B. cereus but lesser than P. aeruginosa. The percentage reduction in TOC and COD was highest for 500 ppm which eventually decreased for subsequent concentrations.