OBJECTIVES: Analyze and quantify the residual monomer elution of nine conventional and CAD/CAM (computer-aided design/computer-aided manufacturing) dental polymers during artificial aging. MATERIALS AND METHODS: A total of 360 square-shaped specimens (14 × 12 × 2 ± 0.05 mm) were fabricated from eight CAD/CAM polymer blanks (n = 40): Avadent Base material, Avadent Teeth material, PMMA Multi blank, PMMA Mono blank, Temp Premium, Telio CAD, Ceramill Temp, Shofu Block HC, and conventional polymer PalaXpress. Specimens were aged in distilled water for 60 days at 37 °C and the evaluation of the residual monomer elution was made through UV spectrophotometry. Statistical analysis was carried out in the SPSS software. One-way ANOVA and Scheffé post hoc test were applied (α < 0.05). RESULTS: Aging time significantly changed the elution in all groups, except for PalaXpress. Statistically significant differences of elution were found between the materials. Shofu Block HC presented the highest, whereas PMMA Multi blank A3 and Mono blank A1 presented the lowest elution after the 60th day of aging. CONCLUSIONS: CAD/CAM dental polymers as well as the conventional polymer PalaXpress eluted residual monomer within aging time. The differences in elution were material-dependent; still, the maximum elution found is below the specified threshold of ISO standard 20795-1. CLINICAL RELEVANCE: With the evolution of CAD/CAM technology, material's manufacturers have invested in the development of polymeric materials with higher resistance and stability to produce indirect restorations using CAD/CAM. It is expected that these materials present lower elution of residual monomer than conventional polymers.
OBJECTIVES: Analyze and quantify the residual monomer elution of nine conventional and CAD/CAM (computer-aided design/computer-aided manufacturing) dental polymers during artificial aging. MATERIALS AND METHODS: A total of 360 square-shaped specimens (14 × 12 × 2 ± 0.05 mm) were fabricated from eight CAD/CAMpolymer blanks (n = 40): Avadent Base material, Avadent Teeth material, PMMA Multi blank, PMMA Mono blank, Temp Premium, Telio CAD, Ceramill Temp, Shofu Block HC, and conventional polymer PalaXpress. Specimens were aged in distilled water for 60 days at 37 °C and the evaluation of the residual monomer elution was made through UV spectrophotometry. Statistical analysis was carried out in the SPSS software. One-way ANOVA and Scheffé post hoc test were applied (α < 0.05). RESULTS: Aging time significantly changed the elution in all groups, except for PalaXpress. Statistically significant differences of elution were found between the materials. Shofu Block HC presented the highest, whereas PMMA Multi blank A3 and Mono blank A1 presented the lowest elution after the 60th day of aging. CONCLUSIONS:CAD/CAM dental polymers as well as the conventional polymer PalaXpress eluted residual monomer within aging time. The differences in elution were material-dependent; still, the maximum elution found is below the specified threshold of ISO standard 20795-1. CLINICAL RELEVANCE: With the evolution of CAD/CAM technology, material's manufacturers have invested in the development of polymeric materials with higher resistance and stability to produce indirect restorations using CAD/CAM. It is expected that these materials present lower elution of residual monomer than conventional polymers.
Authors: Mihaela Pantea; Robert Cătălin Ciocoiu; Maria Greabu; Alexandra Ripszky Totan; Marina Imre; Ana Maria Cristina Țâncu; Ruxandra Sfeatcu; Tudor Claudiu Spînu; Radu Ilinca; Alexandru Eugen Petre Journal: Materials (Basel) Date: 2022-04-23 Impact factor: 3.748
Authors: Mihaela Pantea; Alexandra Ripszky Totan; Marina Imre; Alexandru Eugen Petre; Ana Maria Cristina Țâncu; Cristian Tudos; Alexandru Titus Farcașiu; Mihai Butucescu; Tudor Claudiu Spînu Journal: Materials (Basel) Date: 2021-12-29 Impact factor: 3.623
Authors: Roxana Nicoleta Ionescu; Alexandra Ripszky Totan; Marina Meleșcanu Imre; Ana Maria Cristina Țâncu; Mihaela Pantea; Mihai Butucescu; Alexandru Titus Farcașiu Journal: Materials (Basel) Date: 2022-01-28 Impact factor: 3.623