Gallium Phosphide photoanode coated with TiO2 and CoOx for stable photoelectrochemical water oxidation.

Gallium Phosphide (GaP) has a band gap of 2.26 eV and a valance band edge that is more negative than the water oxidation level. Hence, it may be a promising material for photoelectrochemical water splitting. However, one thing GaP has in common with other III-V semiconductors is that it corrodes in photoelectrochemical reactions. Cobalt oxide (CoOx) is a chemically stable and highly active oxygen evolution reaction co-catalyst. In this study, we protected a GaP photoanode by using a 20 nm TiO2 as a protection layer and a 2 nm cobalt oxide co-catalyst layer, which were both deposited via atomic layer deposition (ALD). A GaP photoanode that was modified by CoOx exhibited much higher photocurrent, potential, and photon-to-current efficiency than a bare GaP photoanode under AM1.5G illumination. A photoanode that was coated with both TiO2 and CoOx layers was stable for over 24 h during constant reaction in 1 M NaOH (pH 13.7) solution under one sun illumination.