Literature DB >> 30660003

Tensile behavior and structural characterization of pig dermis.

Andrei Pissarenko1, Wen Yang2, Haocheng Quan1, Katherine A Brown3, Alun Williams4, William G Proud5, Marc A Meyers6.   

Abstract

Skin, the outermost layer of the body, fulfills a broad range of functions, protecting internal organs from damage and infection, while regulating the body's temperature and water content via the exchange of heat and fluids. It must be able to withstand and recover from extensive deformation and damage that can occur during growth, movement, and potential injuries. A detailed investigation of the evolution of the collagen architecture of the dermis as a function of deformation is conducted, which reveals new aspects that help us to understand the mechanical response of skin. Juvenile pig is used as a model material because of its similarity to human skin. The dermis is found to have a tridimensional woven structure of collagen fibers, which evolves with deformation. After failure, we observe that the fibers have straightened and aligned in the direction of tension. The effects of strain-rate change, cyclic loading, stress relaxation, and orientation are quantitatively established. Digital image correlation techniques are implemented to quantify skin's anisotropy; measurements of the Poisson ratio are reported. This is coupled with transmission electron microscopy which enables obtaining quantitative strain parameters evaluated through the orientation and curvature of the collagen fibers and their changes, for the first time in all three dimensions of the tissue. A model experiment using braided human hair in tension exhibits a similar J-curve response to skin, and we propose that this fiber configuration is at least partially responsible for the monotonic increase of the tangent modulus of skin with strain. The obtained results are intended to serve as a basis for structurally-based models of skin. STATEMENT OF SIGNIFICANCE: Our study reveals a new aspect of the dermis: it is comprised of a tridimensional woven structure of collagen fibers, which evolves with deformation. This is enabled by primarily two techniques, transmission electron microscopy on three perpendicular planes and confocal images with second harmonic generation fluorescence of collagen, captured at different intervals of depth. After failure, the fibers have straightened and aligned in the direction of tension. Digital image correlation techniques are implemented to quantify skin's anisotropy; measurements of the Poisson ratio are reported. A model experiment using braided human hair in tension exhibits a similar J-curve response to skin, and we propose that this fiber configuration is at least partially responsible for the monotonic increase of the tangent modulus of skin with strain.
Copyright © 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Collagen; Mechanical properties; Pig; Skin; Stress relaxation; TEM

Mesh:

Substances:

Year:  2019        PMID: 30660003     DOI: 10.1016/j.actbio.2019.01.023

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  8 in total

1.  Bayesian calibration of a computational model of tissue expansion based on a porcine animal model.

Authors:  Tianhong Han; Taeksang Lee; Joanna Ledwon; Elbert Vaca; Sergey Turin; Aaron Kearney; Arun K Gosain; Adrian B Tepole
Journal:  Acta Biomater       Date:  2021-10-08       Impact factor: 8.947

2.  Multiscale Computational Model Predicts Mouse Skin Kinematics Under Tensile Loading.

Authors:  Nathan J Witt; Alan E Woessner; Kyle P Quinn; Edward A Sander
Journal:  J Biomech Eng       Date:  2022-04-01       Impact factor: 2.097

3.  Soft three-dimensional network materials with rational bio-mimetic designs.

Authors:  Dongjia Yan; Jiahui Chang; Hang Zhang; Jianxing Liu; Honglie Song; Zhaoguo Xue; Fan Zhang; Yihui Zhang
Journal:  Nat Commun       Date:  2020-03-04       Impact factor: 14.919

4.  Three-Dimensional Quantification of Collagen Microstructure During Tensile Mechanical Loading of Skin.

Authors:  Alan E Woessner; Jake D Jones; Nathan J Witt; Edward A Sander; Kyle P Quinn
Journal:  Front Bioeng Biotechnol       Date:  2021-03-03

5.  A method to analyze the influence of mechanical strain on dermal collagen morphologies.

Authors:  Maximilian Witte; Michael Rübhausen; Sören Jaspers; Horst Wenck; Frank Fischer
Journal:  Sci Rep       Date:  2021-04-07       Impact factor: 4.379

6.  Effect of collagen fibre orientation on the Poisson's ratio and stress relaxation of skin: an ex vivo and in vivo study.

Authors:  Krashn Kumar Dwivedi; Piyush Lakhani; Sachin Kumar; Navin Kumar
Journal:  R Soc Open Sci       Date:  2022-03-23       Impact factor: 2.963

7.  A Bilayer Skin-Inspired Hydrogel with Strong Bonding Interface.

Authors:  Chubin He; Xiuru Xu; Yang Lin; Yang Cui; Zhengchun Peng
Journal:  Nanomaterials (Basel)       Date:  2022-03-29       Impact factor: 5.076

Review 8.  Exploring the Mechanical Properties and Performance of Type-I Collagen at Various Length Scales: A Progress Report.

Authors:  Shirsha Bose; Simin Li; Elisa Mele; Vadim V Silberschmidt
Journal:  Materials (Basel)       Date:  2022-04-08       Impact factor: 3.748

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.