| Literature DB >> 30646880 |
W Pepke1, H Almansour1, R Lafage2, B G Diebo3, B Wiedenhöfer4, F Schwab2, V Lafage2, M Akbar5.
Abstract
BACKGROUND: Several studies have emphasized the importance of restoring thoracic kyphosis (TK) in the setting of AIS, but very few have discussed changes in cervical spine alignment following surgery. Aim of this study was to evaluate reciprocal cervical alignment change after modification of global and regional thoracolumbar alignment with surgery in the setting of adolescent idiopathic scoliosis (AIS).Entities:
Keywords: AIS; Adolescent scoliosis; Cervical alignment; Cervical spine; Deformity
Mesh:
Year: 2019 PMID: 30646880 PMCID: PMC6334400 DOI: 10.1186/s12893-019-0471-2
Source DB: PubMed Journal: BMC Surg ISSN: 1471-2482 Impact factor: 2.102
Fig. 1Flow diagram illustrating the process of inclusion and exclusion of study cohort
Fig. 2Lateral radiographs illustrating cervical spine parameters. C2-T1 Ha = C2-T1 Harrison posterior tangent method. PT = pelvic tilt; PI = pelvic incidence; SS = sacral slope; LL = lumbar lordosis; TK = thoracic kyphosis; SVA = sagittal vertical axis; MGS = McGregor slope
Description of the measured parameters with their respective normative values and range
| Parameter | Description and clinical relevance | Normative values | range |
|---|---|---|---|
| SS [ | The angle between the sacral endplate (S1) and the horizontal. In asymptomatic subjects, SS correlates with PI ( | 41° ±8° | – |
| PT [ | The angle between a line form the center of the femoral head axis to the midpoint of the sacral plate and the vertical line. PT reveals a compensatory mechanism and increases with loss of LL. PT correlates with patient reported outcomes (disability). | 13° ±6° | −4.7 to 27° |
| PI [ | The angle between a line from the center of the femoral head axis to the midpoint of the sacral plate and the perpendicular line to the sacral plate. PI is a morphological parameter, fixed in adults, and determines spine-pelvic alignment. PI=PT + SS | 51.9° ± 10° | 35° to 85° |
| PI-LL [ | the difference between PI an LL. Estimates the “lack of lordosis” and correlates with disability patient reported outcomes HQRoL | −8° ± °9° | −25° to 15° |
| LL (L1-S1) [ | The angle between the upper endplate of L1 and sacral endplate. | 60.9° ± 12° | 31° to 88° |
| TK (T2-T12) [ | The angle between the caudal endplate of T12 and the cranial endplate of T2. | −40.6° ± 10° | 0° to − 69° |
| SVA [ | The horizontal offset from a plumbline dropped from C7 to the postero-superior corner of S1. SVA strongly correlates to clinical outcomes. | −0.5 ± 25 mm | -60 mm to + 65 mm |
| T1SPI [ | The angle between vertical and a line from the center of the femoral head axis to the center of the T1 vertebral body. T1SPI assesses the global spino-pelvic alignment and correlates with clinical outcomes. | −1.35° ± 2.7° | −9.16° to 7.2° |
| TPA [ | The angle formed by the center of the sacral endplate, the center of the femoral head axis, and the center of T1 vertebral body. TPA strongly correlates with HRQOL, PT and SVA. | 7.7° ± 7° | −6° to 23° |
| T1 Slope [ | The angle between the horizontal line and cranial endplate of T1. T1 Slope defines the orientation of the cervical spine and highly correlates with SVA and TK. | 26° ± 10° | 14° to 38° |
| CL (C2-C7) [ | The angle between the caudal endplate of C2 and the caudal endplate of C7. CL increases with positive sagittal malalignment in order to maintain horizontal gaze. | 5° ± 12° | −10° to 22° |
| cSVA (C2-C7 SVA) [ | The horizontal offset from the plumbline dropped from C2 to the postero-superior corner of C7. cSVA is a descriptor of cervical sagittal deformity. | 26 ± 11 mm | 12 mm to 40 mm |
| C2-T3 | The angle between the caudal endplate of C2 and the caudal endplate of T3. | – | – |
| C2-T3 SVA | The horizontal offset from the plumb line dropped from C2 to the postero-superior corner of T3 | – | – |
| C2-T1 – H [ | Involves drawing lines that are parallel to the posterior surfaces of all cervical vertebral bodies from C2 to T1 and then summing the segmental angles for an overall cervical curvature angle. The Harrison method is a precise method of quantifying cervical curvature. | about 41.8° | – |
| C2 Slope | The angle between the horizontal line and cranial endplate of C2. C2 Slope defines the orientation of upper cervical spine. | – | – |
| C0 Slope | The angle between the horizontal and cranial ring of C0. C0 Slope defines the orientation of upper cervical spine. | – | – |
| MGSlope [ | The angle between the horizontal line and a line connecting the posterior aspect of the hard palate and the opisthion. | 1.8° ± 6.3° | – |
SS sacral slope, PT pelvic tilt, PI Pelvic incidence, LL (L1 – S1) lumbar lordosis measured from L1 to S1, PI-LL pelvic incidence minus lumbar lordosis mismatch, TK (TK 2 – TK 12) thoracic kyphosis measured from TK 2 to TK 12, SVA sagittal vertical axis, T1SPi T1 spinopelvic inclination, TPA T1 pelvic angle; cranial, C0S C0 Slope, C2S C2 Slope, C2-C0 angle; C2-C7 angle, C2-C7 SVA (SVA sagittal vertical axis), C2-T3angle, C2-T3 SVA (SVA sagittal vertical axis), T1 Slope, MGS McGregor Slope (line), HRQOL Health-Related Quality of Life, −-- not estimated
Stratification based on the change on lumbar lordosis (LL), thoracic kyphosis (TK) and sagittal vertical axis (SVA)
| Stratification based on the change in LL, TK and SVA | ||
|---|---|---|
| Thoracic Kyphosis (TK) | ||
| Increase: ΔTK < −5° | Stable: ΔTK = [− 5°; 5°] | Decrease: ΔTK > 5° |
| Sagittal Vertical Axis (SVA) | ||
| Increase: ΔSVA> 25 mm | Stable: ΔSVA = [− 25 mm; 25 mm] | Decrease: ΔSVA<− 25 mm |
TK thoracic kyphosis, SVA sagittal vertical axis, Δ = parameter change pre- to-post-operatively
Descriptive analysis of spino-pelvic and global alignment parameters in AIS patients pre- and post-operatively
| Pre-OP | Post-OP | Change = Δ | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Parameter | Min | Max | Mean | SD | Min | Max | Mean | SD | Min | Max | Mean | SD |
| SS | 6.1 | 62.2 | 40.5 | 10.5 | 12.0 | 72.6 | 40.9 | 11.2 | −12.5 | 17.9 | 0.4 | 6.8 |
| PT | −6.0 | 30.5 | 12.2 | 8.1 | −17.7 | 30.5 | 11.7 | 9.0 | −16.4 | 10.9 | −0.5 | 6.5 |
| PI | 15.2 | 82.9 | 52.6 | 13.7 | 16.0 | 81.8 | 52.5 | 13.4 | −4.8 | 4.3 | −0.1 | 1.9 |
| PI-LL | −41.2 | 29.8 | −4.9 | 12.8 | −34.5 | 27.2 | −4.3 | 13.2 | −21.5 | 25.3 | 0.6 | 10.6 |
| LL (L1-S1) | 20.0 | 91.7 | 57.5 | 12.9 | 21.7 | 87.2 | 56.8 | 13.6 | − 25.9 | 22.8 | −0.7 | 10.4 |
| TK (T2-T12) | −91.2 | 17.5 | −36.7 | 17.0 | − 93.6 | −5.2 | −33.1 | 13.8 | −30.9 | 49.8 | −1.1 | 14.3 |
| SVA | − 111.6 | 143.5 | 1.2 | 46.4 | −98.6 | 168.2 | −0.6 | 45.5 | − 140.4 | 172.9 | −1.8 | 49.3 |
| T1SPI | −11.7 | 7.4 | −4.2 | 4.3 | −15.4 | 6.5 | −4.3 | 4.0 | −15.1 | 12.5 | −0.1 | 4.6 |
| TPA | −9.3 | 28.3 | 8.0 | 7.4 | −16.9 | 27.2 | 7.4 | 8.8 | −15.5 | 14.3 | −0.6 | 6.2 |
SS sacral slope, PT pelvic tilt, PI Pelvic incidence, LL (L1 – S1) lumbar lordosis measured from L1 to S1, PI-LL pelvic incidence minus lumbar lordosis mismatch, TK (TK 2 – TK 12) thoracic kyphosis measured from TK 2 to TK 12, SVA sagittal vertical axis, T1SPi T1 spinopelvic inclination, TPA T1 pelvic angle; cranial, MGS McGregor Slope (line), Δ parameter change pre- to post-operatively, SD standard deviation
Descriptive analysis of cervical alignment parameters in AIS patients pre- and post-operatively
| Pre-OP | Post-OP | Change = Δ | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Parameter | Min | Max | Mean | SD | Min | Max | Mean | SD | Min | Max | Mean | SD |
| T1Slope | 81 | −8.0 | 54.3 | 20.6 | 81 | − 9.1 | 60.9 | 23.4 | 81 | −18.6 | 21.9 | 2.8 |
| C2-C7 | 75 | −35.2 | 55.2 | −1.7 | 75 | −36.3 | 59.6 | 2.8 | 71 | −23.8 | 53.6 | 5.5 |
| C2-C7 SVA | 75 | −5.3 | 71.6 | 32.0 | 75 | − 5.1 | 80.1 | 34.0 | 71 | −35.6 | 39.5 | 2.4 |
| C2-T3 | 75 | −44.0 | 73.4 | −5.3 | 75 | −42.8 | 68.9 | − 4.5 | 71 | − 46.4 | 42.2 | 2.0 |
| C2-T3 SVA | 75 | 5.6 | 123.9 | 52.7 | 75 | −2.7 | 165.6 | 59.2 | 71 | −41.8 | 48.0 | 6.8 |
| C2-T1 - H | 72 | −39.2 | 79.0 | 7.3 | 73 | −34.7 | 78.6 | 12.4 | 66 | −39.5 | 49.0 | 6.1 |
| C2Slope | 75 | −14.0 | 47.5 | 21.9 | 75 | −10.6 | 53.6 | 20.6 | 71 | −42.7 | 34.0 | −1.9 |
| C0Slope | 42 | −16.9 | 15.9 | −0.6 | 44 | −30.8 | 20.3 | −2.3 | 26 | −25.9 | 8.25 | −4.48 |
| C2-C0 | 40 | −6.2 | 35.4 | 22.4 | 44 | −9.4 | 38.6 | 21.3 | 26 | −20.3 | 8.63 | −2.25 |
| MGSlope | 36 | −9.3 | 18.6 | 4.278 | 41 | −26.3 | 28.7 | 3.3 | 23 | −25.8 | 7.46 | −5.05 |
C0S C0 Slope, C2S C2Slope, C2-C0angle; C2-C7 angle, C2-C7 SVA (SVA sagittal vertical axis), C2-T3 angle, C2-T3 SVA (SVA sagittal vertical axis), T1 Slope, MGS McGregor Slope (line), Δ parameter change pre- to post-operatively, SD standard deviation
Fig. 3a Comparison of subgroups: decreased, stable, and increased thoracic kyphosis (TK) with ΔT1 Slope and ΔC2-T3; p = statistical significance, p < 0.05. b Comparison of subgroups: decreased, stable, and increased sagittal vertical axis (SVA) with ΔT1 Slope, ΔC2-T3, ΔC2-C7 SVA and ΔC2-T3 SVA; p = statistical significance, p < 0.05
Stratification by change in thoracic kyphosis (TK): comparison of baseline and postoperative spino-pelvic parameters and their respective pre-to post-op change
| Stratification by change in TK | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Baseline | Post-OP | Change (Δ) | ||||||||||
| Decrease | Stable | Increase |
| Decrease | Stable | Increase |
| Decrease | Stable | Increase |
| |
| SS | 40.7 ± 12.7 | 39.6 ± 11.3 | 41.1 ± 9.5 | 0.835 | 45.9 ± 13.1 | 38.9 ± 12.1 | 41.1 ± 9.9 | 0.231 | 5.1 ± 5.2 | −0.6 ± 6.5 | 0.1 ± 6.9 | 0.054 |
| PT | 12.4 ± 11.8 | 12.5 ± 7.2 | 11.8 ± 8.0 | 0.930 | 8.2 ± 12.8 | 13.3 ± 7.6 | 11.2 ± 9.0 | 0.272 | −4.2 ± 5.6 | 0.8 ± 6.5 | −0.6 ± 6.5 | 0.103 |
| PI | 53.2 ± 18.2 | 52.1 ± 14.5 | 52.9 ± 12.2 | 0.964 | 54.1 ± 17.5 | 52.2 ± 13.9 | 52.4 ± 12.2 | 0.929 | 0.9 ± 1.8 | 0.1 ± 1.4 | −0.5 ± 2.2 | 0.072 |
| PI-LL | −9.4 ± 14.3 | −7.6 ± 11.1 | −1.6 ± 13.2 | 0.071 | −2.6 ± 17.7 | −4.0 ± 12.5 | −5.0 ± 12.7 | 0.867 | 6.8 ± 9.5 | 3.6 ± 11.2 | −3.4 ± 9.0 | 0.002 |
| LL | 62.6 ± 14.6 | 59.7 ± 12.5 | 54.5 ± 12.4 | 0.098 | 56.7 ± 16.2 | 56.2 ± 13.2 | 57.3 ± 13.5 | 0.945 | −5.9 ± 8.8 | −3.5 ± 11.2 | 2.8 ± 9.1 | 0.008 |
| TK | −48.5 ± 11.8 | −43.6 ± 14.0 | −28.5 ± 16.4 | 0.000 | −30.7 ± 8.8 | −41.5 ± 13.2 | −41.0 ± 16.5 | 0.104 | 17.9 ± 7.0 | 2.0 ± 4.4 | −12.5 ± 5.3 | 0.000 |
| SVA | 21.4 ± 44.6 | −1.4 ± 47.5 | −1.8 ± 45.8 | 0.342 | 34.0 ± 60.5 | −7.2 ± 37.5 | −4.0 ± 44.4 | 0.034 | 12.6 ± 73.3 | −5.8 ± 51.8 | −2.2 ± 40.1 | 0.594 |
| T1SPI | −2.7 ± 5.7 | −4.6 ± 4.5 | −4.2 ± 3.7 | 0.463 | −0.6 ± 4.5 | −5.3 ± 3.4 | −4.5 ± 3.9 | 0.004 | 2.1 ± 6.1 | −0.6 ± 5.0 | −0.3 ± 3.8 | 0.253 |
| TPA | 9.7 ± 7.9 | 8.0 ± 6.0 | 7.6 ± 8.4 | 0.737 | 7.6 ± 12.6 | 8.1 ± 7.2 | 6.8 ± 9.0 | 0.818 | −2.1 ± 6.9 | 0.2 ± 6.1 | −0.9 ± 6.1 | 0.572 |
| T1Slope | 25.2 ± 12.5 | 23.6 ± 11.9 | 17.0 ± 11.2 | 0.029 | 19.9 ± 8.7 | 24.6 ± 11.7 | 23.3 ± 11.6 | 0.529 | −5.3 ± 8.5 | 0.9 ± 7.0 | 6.3 ± 6.2 | 0.000 |
| C2-C7 | 7.8 ± 20.2 | −1.7 ± 16.2 | −4.3 ± 16.2 | 0.137 | 6.2 ± 8.7 | 2.2 ± 14.6 | 2.6 ± 16.1 | 0.799 | 0.6 ± 14.5 | 4.1 ± 12.7 | 7.7 ± 13.8 | 0.323 |
| C2-C7 SVA | 33.7 ± 11.3 | 35.1 ± 19.1 | 29.0 ± 15.7 | 0.327 | 31.2 ± 23.0 | 35.5 ± 17.1 | 33.2 ± 15.5 | 0.733 | −1.3 ± 15.8 | 1.3 ± 15.8 | 4.0 ± 12.1 | 0.551 |
| C2-T3 | 7.7 ± 22.1 | −4.5 ± 21.1 | −9.5 ± 17.4 | 0.053 | −0.6 ± 10.4 | −6.7 ± 19.2 | −3.8 ± 14.8 | 0.595 | −8.1 ± 22.5 | −1.0 ± 15.4 | 6.5 ± 11.7 | 0.019 |
| C2-T3 SVA | 54.5 ± 18.8 | 59.4 ± 26.2 | 46.9 ± 22.1 | 0.105 | 52.8 ± 28.7 | 63.6 ± 28.7 | 57.3 ± 22.5 | 0.470 | −0.5 ± 20.4 | 4.7 ± 16.9 | 10.1 ± 14.6 | 0.176 |
| C2-T1 – H | 17.8 ± 23.6 | 8.2 ± 18.2 | 3.4 ± 18.6 | 0.113 | 12.2 ± 8.1 | 12.7 ± 17.6 | 12.2 ± 19.4 | 0.992 | −3.8 ± 23.3 | 3.7 ± 13.6 | 10.1 ± 12.6 | 0.043 |
| C2Slope | 16.3 ± 11.6 | 24.7 ± 12.8 | 21.2 ± 10.6 | 0.138 | 14.5 ± 11.0 | 22.4 ± 11.9 | 20.6 ± 10.7 | 0.217 | −3.8 ± 9.5 | −2.4 ± 10.9 | −1.1 ± 12.0 | 0.798 |
| C0Slope | −1.1 ± 4.4 | 0.3 ± 6.9 | −1.3 ± 7.5 | 0.762 | −0.6 ± 7.4 | −2.8 ± 6.9 | − 2.4 ± 10.1 | 0.898 | − 2.1 ± 7.2 | −3.0 ± 7.3 | −6.7 ± 10.2 | 0.534 |
| C0-C2 | 18.3 ± 12.3 | 23.2 ± 8.1 | 22.8 ± 9.1 | 0.562 | 13.0 ± 14.5 | 23.1 ± 8.8 | 21.9 ± 7.9 | 0.099 | −5.1 ± 3.3 | −1.9 ± 7.6 | − 1.9 ± 9.8 | 0.824 |
| MGSlope | 5.3 ± 4.5 | 5.2 ± 6.6 | 3.2 ± 6.9 | 0.673 | 4.7 ± 7.1 | 2.8 ± 6.4 | 3.2 ± 9.9 | 0.921 | −4.3 ± 7.0 | −3.1 ± 7.6 | −7.2 ± 10.5 | 0.601 |
SS sacral slope, PT pelvic tilt, PI Pelvic incidence, LL (L1 – S1) lumbar lordosis measured from L1 to S1, PI-LL pelvic incidence minus lumbar lordosis mismatch, TK (TK 2 – TK 12) thoracic kyphosis measured from TK 2 to TK 12, SVA sagittal vertical axis, T1SPi T1 spinopelvic inclination, TPA T1 pelvic angle; cranial: MGS McGregor Slope (line). C0S C0 Slope, C2S C2 Slope, C2-C0 angle; C2-C7 angle, C2-C7 SVA (SVA sagittal vertical axis), C2-T3 angle, C2-T3 SVA (SVA sagittal vertical axis), T1 Slope, MGS McGregor Slope (line); Δ parameter change pre- to post-operatively; data expressed as mean ± standard deviation; p statistical significance, p < 0.05
Stratification by change in sagittal vertical axis (SVA): comparison of baseline and postoperative spino-pelvic parameters and their respective pre-to post-op change
| Stratification by change in SVA | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Baseline | Post-OP | Change (Δ) | ||||||||||
| Decrease | Stable | Increase | p | Decrease | Stable | Increase | p | Decrease | Stable | Increase | p | |
| SS | 40.6 ± 10.4 | 43.7 ± 9.0 | 37.9 ± 11.9 | 0.131 | 40.6 ± 10.6 | 43.6 ± 10.4 | 39.1 ± 12.3 | 0.344 | 0.1 ± 6.4 | −0.2 ± 5.8 | 1.2 ± 7.8 | 0.739 |
| PT | 9.5 ± 8.2 | 12.4 ± 9.0 | 14.3 ± 7.0 | 0.072 | 9.2 ± 10.2 | 12.0 ± 8.3 | 13.5 ± 8.2 | 0.195 | −0.2 ± 6.6 | − 0.5 ± 5.7 | − 0.8 ± 7.1 | 0.940 |
| PI | 50.0 ± 12.9 | 56.2 ± 13.4 | 52.2 ± 14.5 | 0.287 | 49.9 ± 12.4 | 55.6 ± 12.6 | 52.6 ± 14.8 | 0.334 | −0.2 ± 1.9 | −0.6 ± 1.9 | 0.3 ± 2.0 | 0.198 |
| PI-LL | −7.2 ± 17.0 | −3.8 ± 9.6 | −3.6 ± 10.6 | 0.512 | −10.5 ± 13.3 | −5.1 ± 11.5 | 1.7 ± 11.8 | 0.001 | −3.3 ± 10.4 | − 1.3 ± 8.5 | 5.3 ± 10.7 | 0.004 |
| LL | 57.3 ± 13.8 | 60.0 ± 9.7 | 55.8 ± 14.3 | 0.504 | 60.4 ± 10.9 | 60.7 ± 11.8 | 50.8 ± 15.0 | 0.006 | 3.1 ± 10.1 | 0.7 ± 8.2 | −5.0 ± 10.9 | 0.008 |
| TK | −43.5 ± 22.5 | −37.2 ± 9.7 | −30.5 ± 13.5 | 0.012 | −45.6 ± 18.5 | −41.6 ± 10.1 | −33.8 ± 11.9 | 0.007 | −2.0 ± 14.1 | −4.4 ± 10.9 | −3.4 ± 10.1 | 0.766 |
| SVA | 32.6 ± 44.9 | 1.4 ± 33.0 | −26.3 ± 39.0 | 0.000 | −19.9 ± 36.5 | −5.1 ± 36.0 | 19.6 ± 51.4 | 0.003 | −52.4 ± 25.8 | −6.6 ± 7.8 | 45.9 ± 34.2 | 0.000 |
| T1SPI | −1.1 ± 4.3 | −4.2 ± 3.2 | − 6.9 ± 3.1 | 0.000 | −5.7 ± 4.1 | − 4.7 ± 3.2 | −2.8 ± 4.1 | 0.022 | − 4.6 ± 3.5 | −0.5 ± 1.5 | 4.0 ± 2.9 | 0.000 |
| TPA | 8.4 ± 7.8 | 8.3 ± 7.8 | 7.5 ± 7.1 | 0.897 | 3.6 ± 8.9 | 7.3 ± 7.5 | 10.7 ± 8.5 | 0.007 | −4.8 ± 4.6 | −0.9 ± 4.4 | 3.2 ± 6.2 | 0.000 |
| T1Slope | 26.5 ± 12.9 | 21.6 ± 8.9 | 14.6 ± 10.7 | 0.000 | 24.7 ± 14.3 | 25.1 ± 7.5 | 20.9 ± 10.6 | 0.311 | −1.7 ± 7.9 | 3.5 ± 6.8 | 6.3 ± 6.6 | 0.000 |
| C2-C7 | 4.0 ± 22.0 | −1.7 ± 9.8 | −7.0 ± 13.8 | 0.050 | 5.5 ± 17.7 | 4.3 ± 12.4 | −0.6 ± 13.5 | 0.280 | 2.9 ± 14.1 | 5.9 ± 14.5 | 7.6 ± 12.3 | 0.444 |
| C2-C7 SVA | 36.7 ± 13.9 | 36.1 ± 14.6 | 25.0 ± 18.2 | 0.013 | 35.1 ± 19.0 | 35.9 ± 12.7 | 31.7 ± 17.6 | 0.635 | −1.5 ± 13.6 | −0.5 ± 14.2 | 7.6 ± 12.9 | 0.034 |
| C2-T3 | 2.0 ± 27.2 | −6.8 ± 10.8 | −11.1 ± 14.7 | 0.044 | −3.7 ± 22.1 | −5.0 ± 12.0 | −4.9 ± 13.0 | 0.954 | −4.2 ± 17.7 | 2.7 ± 14.7 | 7.1 ± 11.2 | 0.023 |
| C2-T3 SVA | 62.2 ± 23.3 | 57.3 ± 21.9 | 40.9 ± 21.2 | 0.002 | 61.4 ± 32.7 | 63.0 ± 17.5 | 54.5 ± 23.4 | 0.445 | −0.8 ± 18.3 | 4.8 ± 12.5 | 14.9 ± 13.0 | 0.001 |
| C2-T1 – H | 13.2 ± 26.8 | 7.0 ± 10.0 | 2.1 ± 15.3 | 0.117 | 14.5 ± 22.4 | 16.6 ± 14.0 | 7.8 ± 14.7 | 0.189 | 2.6 ± 17.6 | 11.0 ± 12.6 | 6.2 ± 13.1 | 0.219 |
| C2Slope | 21.6 ± 14.8 | 23.7 ± 9.3 | 21.0 ± 10.2 | 0.737 | 19.7 ± 13.6 | 20.7 ± 8.4 | 21.4 ± 11.2 | 0.860 | −3.0 ± 10.5 | −3.3 ± 13.1 | 0.0 ± 10.6 | 0.515 |
| C0Slope | −1.4 ± 7.6 | 3.0 ± 6.9 | −3.1 ± 5.1 | 0.054 | −1.3 ± 6.8 | −1.7 ± 4.5 | −4.0 ± 13.2 | 0.672 | −1.0 ± 7.7 | −7.3 ± 8.4 | −6.8 ± 9.0 | 0.200 |
| C0-C2 | 19.1 ± 11.7 | 24.1 ± 7.4 | 24.3 ± 6.7 | 0.238 | 18.8 ± 11.3 | 20.8 ± 7.1 | 24.9 ± 7.4 | 0.183 | −3.6 ± 8.2 | −3.8 ± 9.5 | 1.6 ± 5.5 | 0.351 |
| MGSlope | 2.7 ± 6.4 | 9.3 ± 6.8 | 2.1 ± 4.2 | 0.011 | 4.3 ± 6.0 | 4.0 ± 5.2 | 1.1 ± 13.3 | 0.593 | −0.8 ± 7.6 | −8.6 ± 9.0 | −8.1 ± 8.7 | 0.123 |
SS sacral slope, PT pelvic tilt, PI Pelvic incidence, LL (L1 – S1) lumbar lordosis measured from L1 to S1, PI-LL pelvic incidence minus lumbar lordosis mismatch, TK (TK 2 – TK 12) thoracic kyphosis measured from TK 2 to TK 12, SVA sagittal vertical axis, T1SPi T1 spinopelvic inclination, TPA T1 pelvic angle; cranial: MGS McGregor Slope (line). C0S C0 Slope, C2S C2 Slope, C2-C0 angle; C2-C7 angle, C2-C7 SVA (SVA sagittal vertical axis), C2-T3angle, C2-T3 SVA (SVA sagittal vertical axis), T1 Slope, MGS McGregor Slope (line); Δ parameter change pre- to post-operatively; data expressed as mean ± standard deviation; p statistical significance, p < 0.05
Fig. 4a Diagram with correlation analysis of subgroup: pre-to post-operative change in thoracic kyphosis (TK) with ΔT1 Slope, ΔC2-C7, ΔC2-T3, ΔC2-T3 SVA; p = statistical significance, p < 0.05. b Diagram with correlation analysis of subgroup: pre-to post-operative change in sagittal vertical axis (SVA) with ΔT1 Slope, ΔC2-T3, ΔC2-T3 SVA; p = statistical significance, p < 0.05