| Literature DB >> 30514243 |
Zhipeng Mai1, Zhien Zhou1, Weigang Yan2, Yu Xiao3, Yi Zhou1, Zhiyong Liang3, Zhigang Ji1, Hanzhong Li1.
Abstract
BACKGROUND: Prostate biopsy is the most common method for the diagnosis of prostate cancer and the basis for further treatment. Confirmation using radical prostatectomy specimens is the most reliable method for verifying the accuracy of template-guided transperineal prostate biopsy. The study aimed to reveal the spatial distribution of prostate cancer in template-guided transperineal saturation biopsy and radical prostatectomy specimens.Entities:
Keywords: Apex; Biopsy; Radical prostatectomy; Spatial distribution
Mesh:
Year: 2018 PMID: 30514243 PMCID: PMC6278093 DOI: 10.1186/s12885-018-5124-9
Source DB: PubMed Journal: BMC Cancer ISSN: 1471-2407 Impact factor: 4.430
Fig. 1Diagram showing the procedures used for all whole-mount slices from one prostate specimen and the corresponding 11-region map determined by biopsy. The inferior-most 0.5 cm portion of the gland was cut off as the apex. Next, along the cutting edge, whole-mount slices were obtained at 0.4 cm intervals. The remaining portion located approximately 1 cm from the superior-most part of the gland was classified as the base. In the 11-region map, region 11 represented the apex by biopsy, and regions 1–10 represented the mid-gland and the base
Fig. 2The positive region by biopsy was region 1. The whole-mount slice (left side) exhibited two foci, and the small slice (right side) had one focus (extension of focus 1 at the apex). The contours of all foci are outlined in red
Comparison of the Gleason score and T-staging between prostate biopsy and radical prostatectomy specimens
| Biopsy specimens ( | Radical prostatectomy specimens ( | |
|---|---|---|
| Gleason score, no. (%) | ||
| 6 | 62 (36) | 28 (16) |
| 3 + 4 | 65 (38) | 81 (47) |
| 4 + 3 | 21 (12) | 38 (22) |
| 8 | 14 (8) | 8 (5) |
| 9 | 9 (5) | 16 (9) |
| T-staging, no. (%) | ||
| T1c | 86 (50) | |
| T2a | 22 (13) | 21 (1) |
| T2b | 16 (9) | 11 (6) |
| T2c | 41 (24) | 100 (59) |
| T3a | 6 (4) | 27 (16) |
| T3b | 0 (0) | 12 (7) |
Fig. 3Diagram showing the positive rates of various longitudinal slices. Slice 1 = apex; slice 2 = apex above 0.5–0.9 cm; slice 3 = apex above 0.9–1.3 cm; slice 4 = apex above 1.3–1.7 cm; slice 5 = apex above 1.7–2.1 cm; slice 6 = middle layer; slice 7 = base below 2.2–2.6 cm; slice 8 = base below 1.8–2.2 cm; slice 9 = base below 1.4–1.8 cm; slice 10 = base below 1.0–1.4 cm; slice 11 = base