Literature DB >> 30496879

Dosimetric Impact of MRI Distortions: A Study on Head and Neck Cancers.

Mary Adjeiwaah1, Mikael Bylund2, Josef A Lundman2, Karin Söderström2, Björn Zackrisson2, Joakim H Jonsson2, Anders Garpebring2, Tufve Nyholm2.   

Abstract

PURPOSE: To evaluate the effect of magnetic resonance (MR) imaging (MRI) geometric distortions on head and neck radiation therapy treatment planning (RTP) for an MRI-only RTP. We also assessed the potential benefits of patient-specific shimming to reduce the magnitude of MR distortions for a 3-T scanner. METHODS AND MATERIALS: Using an in-house Matlab algorithm, shimming within entire imaging volumes and user-defined regions of interest were simulated. We deformed 21 patient computed tomography (CT) images with MR distortion fields (gradient nonlinearity and patient-induced susceptibility effects) to create distorted CT (dCT) images using bandwidths of 122 and 488 Hz/mm at 3 T. Field parameters from volumetric modulated arc therapy plans initially optimized on dCT data sets were transferred to CT data to compute a new plan. Both plans were compared to determine the impact of distortions on dose distributions.
RESULTS: Shimming across entire patient volumes decreased the percentage of voxels with distortions of more than 2 mm from 15.4% to 2.0%. Using the user-defined region of interest (ROI) shimming strategy, (here the Planning target volume (PTV) was the chosen ROI volume) led to increased geometric for volumes outside the PTV, as such voxels within the spinal cord with geometric shifts above 2 mm increased from 11.5% to 32.3%. The worst phantom-measured residual system distortions after 3-dimensional gradient nonlinearity correction within a radial distance of 200 mm from the isocenter was 2.17 mm. For all patients, voxels with distortion shifts of more than 2 mm resulting from patient-induced susceptibility effects were 15.4% and 0.0% using bandwidths of 122 Hz/mm and 488 Hz/mm at 3 T. Dose differences between dCT and CT treatment plans in D50 at the planning target volume were 0.4% ± 0.6% and 0.3% ± 0.5% at 122 and 488 Hz/mm, respectively.
CONCLUSIONS: The overall effect of MRI geometric distortions on data used for RTP was minimal. Shimming over entire imaging volumes decreased distortions, but user-defined subvolume shimming introduced significant errors in nearby organs and should probably be avoided.
Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Entities:  

Mesh:

Year:  2018        PMID: 30496879     DOI: 10.1016/j.ijrobp.2018.11.037

Source DB:  PubMed          Journal:  Int J Radiat Oncol Biol Phys        ISSN: 0360-3016            Impact factor:   7.038


  4 in total

1.  Measuring geometric accuracy in magnetic resonance imaging with 3D-printed phantom and nonrigid image registration.

Authors:  Katri Nousiainen; Teemu Mäkelä
Journal:  MAGMA       Date:  2019-10-23       Impact factor: 2.310

2.  Sensitivity analysis of different quality assurance methods for magnetic resonance imaging in radiotherapy.

Authors:  Mary Adjeiwaah; Anders Garpebring; Tufve Nyholm
Journal:  Phys Imaging Radiat Oncol       Date:  2020-03-13

3.  Determination of acceptance criteria for geometric accuracy of magnetic resonance imaging scanners used in radiotherapy planning.

Authors:  Henna Kavaluus; Katri Nousiainen; Sampsa Kaijaluoto; Tiina Seppälä; Kauko Saarilahti; Mikko Tenhunen
Journal:  Phys Imaging Radiat Oncol       Date:  2021-01-25

4.  Evaluation of the influence of susceptibility-induced magnetic field distortions on the precision of contouring intracranial organs at risk for stereotactic radiosurgery.

Authors:  Veit Mengling; Florian Putz; Frederik Bernd Laun; Rosalind Perrin; Felix Eisenhut; Arnd Dörfler; Rainer Fietkau; Christoph Bert
Journal:  Phys Imaging Radiat Oncol       Date:  2020-08-13
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.