The effect of pH adjustment of bupivacaine on onset and duration of epidural anaesthesia for caesarean section.

Previous studies have reported that elevation of the pH of local anaesthetics results in more rapid onset of action, with enhanced quality and duration of block. This study investigated the effect of pH adjustment of 0.5 per cent bupivacaine immediately prior to epidural anaesthesia for Caesarean section. Addition of 0.1 ml of 8.4 per cent sodium bicarbonate to 20 ml of 0.5 per cent bupivacaine consistently raised the pH of the local anaesthetic from 5.49 to 7.04 (mean values). One hundred patients, presenting for elective Caesarean section under epidural anaesthesia participated in the study. Forty patients received epidural anaesthesia, using pH-adjusted 0.5 per cent bupivacaine, in a dosage adequate to produce block to the T4 level. A control group of 40 patients received the standard commercial preparation of 0.5 per cent bupivacaine. A further ten patients in each group received epidural anaesthesia using 0.5 per cent bupivacaine with the addition of 1:400,000 epinephrine, to study the effect of epinephrine on pH adjustment of the local anaesthetic. Elevation of the pH of the local anaesthetic significantly increased the speed of onset of action from 6.4 minutes to 3.2 minutes and the time to peak effect from 24.8 minutes to 18.1 minutes, while the duration of anaesthesia was increased from 124.8 minutes to 147.3 minutes. The time to S2 segment blockade was also shortened from 13.5 to 8.6 minutes. Addition of 1:400,000 epinephrine to the local anaesthetic did not influence the effect of pH adjustment. Maternal and umbilical cord plasma levels of bupivacaine were not affected by pH adjustment of the local anaesthetic, while MV/UV and UA/UV ratios were unaltered.