Production costs and potential prices for biosimilars of human insulin and insulin analogues.

INTRODUCTION: High prices for insulin pose a barrier to treatment for people living with diabetes, with an estimated 50% of 100 million patients needing insulin lacking reliable access. As insulin analogues replace regular human insulin (RHI) globally, their relative prices will become increasingly important. Three originator companies control 96% of the global insulin market, and few biosimilar insulins are available. We estimated the price reductions that could be achieved if numerous biosimilar manufacturers entered the insulin market.
METHODS: Data on the price of active pharmaceutical ingredient (API) exported from India were retrieved from an online customs database. Manufacturers of insulins were contacted for price quotes. Where market API prices could not be identified, prices were estimated based on comparison of similarity, in terms of manufacturing process, with APIs for which prices were available. Potential biosimilar prices were estimated by adding costs of excipients, formulation, transport, development and regulatory costs, and a profit margin.
RESULTS: The manufacturing processes for RHI and insulin analogues are similar. API prices were US$24 750/kg for RHI, US$68 757/kg for insulin glargine and an estimated US$100 000/kg for other analogues. Estimated biosimilar prices were US$48-71 per patient per year for RHI, US$49-72 for neutral protamine Hagedorn (NPH) insulin and US$78-133 for analogues (except detemir: US$283-365).
CONCLUSION: Treatment with biosimilar RHI and insulin NPH could cost ≤US$72 per year and with insulin analogues ≤US$133 per year. Estimated biosimilar prices were markedly lower than the current prices for insulin analogues. Widespread availability at estimated prices may allow substantial savings globally.

Severe problems in access to affordable insulin exist in low-income and middle-income countries.

The global insulin market is dominated by three companies, with little competitive biosimilar manufacture.

We estimated that, if there were a competitive biosimilar market, treatment with biosimilar insulins could cost US$72–133 per year or less.

Increasing competition in insulin manufacture could lead to large price reductions, potentially enabling the scale-up of access to treatment.

Introduction

An estimated 100 million people need insulin worldwide. For people living with type 1 diabetes, a constant supply of insulin is necessary for survival, and insulin is needed for the optimal treatment of many living with type 2 diabetes. 1 It is estimated that half of these people do not have reliable, affordable access to the medicine,2 despite rising demand.3 While other factors contribute to the lack of global access to insulin, high prices are a significant cause of suffering, catastrophic health expenditures and deaths.1 4 In low-income and middle-income countries (LMICs), medicines are mostly bought out of pocket, in the private sector.5

For insulins, the three largest manufacturers of insulins account for 96% of the global market volume. This oligopoly, regulatory challenges and regular incremental developments in insulins likely explain the lack of a competitive biosimilar market for insulins.1 6 7

Little has been published on the costs of production of biologics, insulin or its analogues. The aim of this study was to estimate the cost of production and, on this basis, potential prices for biosimilar human insulin and insulin analogues that would be possible with large-scale, competitive manufacturing. Our analysis is made primarily with resource-limited settings in mind and from the perspective of government procurement.

This study was undertaken as part of the Addressing the Challenge and Constraints of Insulin Sources and Supply (ACCISS) study, which aims to improve access to insulin. The study is co-led by Health Action International, Geneva University Hospitals and the University of Geneva, and Boston University School of Public Health.

Methods

We have previously analysed the costs of production for other medicines.8–10 For oral formulations, combining the price of active pharmaceutical ingredient (API) exported from India with assumptions for other production cost components can reliably estimate the prices of medicines manufactured with robust generic competition.8–10

We designed formulae for estimating competitive but profitable prices for insulin biosimilars, based on the cost of API and excipients, costs of formulation into phials, development and regulatory cost, and a margin to account for operating expenditures and profit. For two central assumptions, the cost of API and the cost of formulation, we used high and low assumptions, resulting in a range of estimated prices: a ‘competitive’ formula and a ‘conservative’ formula. The lower assumption represents a scenario of a well-functioning market of numerous biosimilar manufacturers, and the higher end of the range represents a more conservative estimate. Both formulae, using insulin glargine as an example, are shown in figure 1. Details on the derivation of this formula are described below.

Figure 1

Price estimation formulae for biosimilar insulin glargine. API, active pharmaceutical ingredient.

All monetary values are in US dollars.

Costs of API and excipients

Per-kilogram prices of API exported from India were collected from an online database of exports data published pursuant to Indian customs regulations (www.infodriveindia.com), for the period 1 January 2013 to 1 November 2016. After data cleaning to exclude any non-API product (eg, final finished product shipments) and censoring outliers (a small number of low-volume shipments at very low prices, ≤US$5 000/kg for human insulin and ≤US$10 000/kg for insulin glargine; see online supplementary figure 1), linear regression models were used to calculate average API prices for 1 November 2016 (online supplementary figures 1 and 2).

For insulins where API export data were unavailable or insufficient, we took two further approaches to arrive at an estimated cost of API: direct solicitation of price quotes from API manufacturers, and inference of cost of production based on similarities in method of synthesis to APIs for which price information was available from other sources.

API manufacturers were identified and contacted through the Alibaba and IndiaMART online wholesaler market-places (www.alibaba.com, www.indiamart.com). Internet searches were done to identify additional insulin analogue manufacturers, who were contacted by email. Manufacturers identified in a published survey of the global insulin market-place were contacted if their websites indicated that they produce insulin analogues.11

In the ‘competitive’ formula, we subtracted 20% from the estimated API price to account for prices of exported API likely including numerous mark-ups that could be avoided by inhouse manufacture or by domestic procurement. Although little data are available on API mark-ups, this assumption is based loosely on mark-ups of 15%–30% reported for API of HIV medicines.12 As the HIV medicines API market is highly competitive, one would expect that this is a low estimate with regard to the less competitive insulin API market, making this assumption conservative in the context of this analysis. The considerations in estimating API price are further outlined later in the methods.

The cost of API required to manufacture one 1000-unit phial was calculated by multiplying the milligram amount contained in 1000 units of the given insulin type (online supplementary appendix) by the per-kilogram API price.

Excipient contents by insulin type, and their average prices, are given in online supplementary appendix.

Manufacturing process

At the molecular level, insulin analogues are different from human insulin only in a few amino acids (online supplementary figure 3). The manufacturing process is very similar for regular human insulin (RHI) and insulin analogues.13 14 An insulin precursor, expressed by the altered host cell genome, accumulates in the form of inclusion bodies, which are purified from the bacterial culture. The precursor is then cleaved to insulin in vitro using proteases.3 This method is common to RHI and insulin analogues.3 15–18 Similarly, the methods used for purification and refolding of RHI are also viable for insulin analogues.19 20

In confidential communications, biosimilar manufacturers confirmed that for recombinant molecules that have a high level of similarity, it is likely that the inherent cost of upstream processing is very similar.

Formulation costs

A range of estimates for the average cost of formulating API into phials are available.

Studies of antivenom production cost have assumed a formulating cost of US$1 and US$5 per phial, the latter noting that the estimate was very high.21 22 A recent study of human papilloma virus vaccine production reported, based on confidential consultation with industry, a wholesale cost of the phial and packaging materials of US$0.31 per 0.5 mL phial.23

Another source formulation costs are the ‘conversion cost norms’ published in 2012 by the Indian government, as part of price control legislation.24 These norms were used by the government to calculate ceiling prices for medicines until 2013. The conversion, packing and packing material cost ‘norms’ combined were US$0.09 for a 10 mL phial (online supplementary appendix). The ‘norms’ prescribed an assumed wastage rate for raw materials during formulation at 4.5% of API, which we included in our formulae.

Lastly, the prices of the lowest priced products formulated as phials, sold in the UK, can be used as high estimates of their formulating costs (assuming they are not sold at a loss). The prices of the five lowest priced products formulated as phials ranged US$0.64–0.85/phial (online supplementary appendix).

We assumed a range of cost levels for 10 mL phial formulation, which include the phial itself and the cost of filling: a higher level of US$1.00/unit in the ‘conservative’ formula, based on the prices of the cheapest phial formulation products in the UK, and a lower level of US$0.09/unit in the ‘competitive’ formula, based on the values prescribed in the Indian government ‘norms’.

Biosimilar development costs

An estimate by the US Federal Trade Commission put the cost of bringing a biosimilar to market (development, capital expenditure and regulatory costs) at US$100–200 million in markets with stringent regulatory authorities.25 The cost of bringing a biosimilar to market in India has been estimated to be 90% lower than this.26 We assumed that the cost of bringing a biosimilar to market was US$100 million, recouped over 5 years. Additionally, we assumed that 1 million patients (or about 5% of the estimated number of patients with type 1 diabetes globally)1 would purchase insulin from any new biosimilar manufacturer—approximately equivalent to the yearly rate at which insulin analogues have displaced human insulin from the market in high-income countries.11 Therefore, an additional US$20 per patient per year would be added to the cost of production, for the first 5 years that the hypothetical biosimilar is available.

Other costs for mass production

Costs of excipients were added based on prices listed online by large chemical manufacturers and typical excipient composition (online supplementary appendix). We added an additional 20% margin for operating expenditures and profit. We undertook a sensitivity analysis on these cost assumptions.

An analysis by IMS Health estimated that for diabetes medicines, importation and distribution costs added 23% to the manufacturer price in Brazil, 23% in India, 41% in Indonesia and 11% in South Africa.27 Therefore, to allow comparison of estimated prices with reported government procurement prices, we added 20% to represent the cost of importation and distribution.

Estimated biosimilar prices based on companies’ reported costs of production

Some insulin manufacturers report the total expenses in cost of production (termed ‘cost of goods sold’) as a percentage of sales. While it is not possible to definitively calculate per-unit costs of production from these reported percentages, we separately estimated the cost of production based on these reported expenses (online supplementary appendix). Sufficient data were available only for Novo Nordisk, but not for Sanofi or Lilly.

Patient and public involvement

Neither patients nor the public were involved in the research.

Results

Price of API exported from India

Sufficient data on the price of exported API were available for RHI and insulin glargine.

RHI had an average price of US$32 228/kg on 1 November 2016. Shipments to the USA demonstrated two ‘plateaus’ at US$70 000/kg and US$58 000/kg price levels, both price levels significantly above the pricing of exports to other regions (online supplementary figure 1). Another plateau was visible for exports to Mexico, at US$26 000–28 000/kg. The consistency of the price and order sizes within these plateaus suggests recurring orders between individual buyers/manufacturers. If shipments to the USA were excluded from the data set, linear regression yielded an estimated price of US$24 750/kg (decreasing by an average 18% yearly). This value, after removing exports to the USA, was used in production cost estimates. The volume of RHI API exported from India roughly doubled during the time frame studied, from 484 kg exported in 2013 to 793 kg in 2016 up to 1 November, the latter equivalent to about 1.6 million patient-years of treatment or 22.7 million 1000-unit phials.

The linear regression model for insulin glargine gave an average price of US$68 757/kg (decreasing by an average of 27% yearly) on 1 November 2016 (online supplementary figure 2). A plateau was evident for exports to Mexico at around US$80 000/kg.

API price estimation for insulins with insufficient data on API exports

API price quotes from biosimilar manufacturers were received for insulin aspart and none for other analogues.

Insulin NPH

In insulin neutral protamine Hagedorn (NPH), protamine and insulin are combined as crystals in a molar ratio of approximately 8.5:1 (online supplementary appendix). Protamine sulfate is available commercially for US$6550–10 800/kg. As the molecular weight of RHI and protamine sulfate is similar, insulin NPH API cost can be estimated by assuming it is 89% by mass composed of RHI costing US$24 750/kg and 11% protamine sulfate costing US$10 800/kg. This yields a per-kilogram insulin NPH API price of US$23 282.

Insulin aspart

Insulin aspart is different from RHI in 1 of 51 amino acids. Quotes were received from two manufacturers for insulin aspart, at US$87 720 and US$116 108 per kilogram. Both manufacturers were based in China. Based on the quotes received from the manufacturers, we estimated an API cost for insulin aspart of US$100 000/kg. This is about four times our estimate (based on observed shipments) for RHI.

Insulin lispro and insulin glulisine

Insulin lispro and glulisine are each different from RHI in 2 of 51 amino acids. Lispro was the first analogue to be developed, and its manufacturing process for insulin lispro is nearly identical to that of RHI.14 We assumed that their API costs are the same as that for insulin aspart—US$100 000/kg.

Insulin detemir and insulin degludec

Insulin detemir and insulin degludec differ from RHI by their lack of the last residue on B chain and the attachment of a fatty acid group in its place. For originators detemir and degludec, the addition of the fatty acid groups is done in vitro, after purifying from the producing cell a human insulin-like precursor modified to lack the B30 residue.18 28 The fermentation and recovery aspects are common to RHI, detemir and degludec production.28 The fatty acids are commercially available at low cost. Given the small difference in amino acid sequence, the relatively simple process of adding fatty acid chains and the low cost of reagents, we assumed the cost of detemir and degludec API to be equal to that for the aspart, lispro and glulisine analogues. However, due to its dosage in milligram terms being three times that of the other insulin analogues, the estimated price for insulin detemir was significantly higher (see below).

Final estimated prices

Final price estimates are given in table 1, and a full costing breakdown is available in online supplementary appendix. Assuming a dosage of 40 units/day (WHO defined daily dose for insulin), these estimated prices translate to a cost per patient per year of US$48–133, except for the cost of detemir, at US$283–365 per year.

Table 1

Estimated prices for insulins

Compound	Price of API per kilogram (US$)	Typical dose per day* (mg)	API cost per day (US$)	Estimated cost of production for 10 mL (1000 units) phial (US$)	Estimated price for 10 mL (1000 units) phial (US$)	Estimated price per year (US$)*
Regular human insulin	24 750	1.40	0.03	2.28–3.37	3.29–4.86	48–71
Insulin NPH	23 282	1.56	0.04	2.32–3.42	3.35–4.93	49–72
Glargine	68 757	1.46	0.10	3.69–5.13	5.32–7.38	78–108
Lispro	100 000	1.40	0.14	4.52–6.16	6.51–8.87	95–130
Aspart	100 000	1.40	0.14	4.51–6.16	6.50–8.86	95–129
Glulisine	100 000	1.40	0.14	4.47–6.11	6.44–8.80	94–128
Detemir	100 000	5.68	0.57	13.47–17.35	19.40–24.99	283–365
Degludec	100 000	1.46	0.15	4.66–6.34	6.71–9.13	98–133

*Assuming 40 units used per patient per day.

API, active pharmaceutical ingredient; NPH, neutral protamine Hagedorn.

The estimated biosimilar prices are set in context in figure 2, where they are compared with recent government procurement prices in various countries reported by the ACCISS study4, as well as UK government-purchase prices reported in the British National Formulary and US prices government-purchase prices reported by the US Veterans’ Affairs Committee.29 30 Current prices of RHI were at a median of 1.2–1.8 times the estimated prices. Current prices of insulin glargine were at a median of 5.6–7.8 times the estimated prices, insulin lispro prices were at 2.7–3.7 times the estimated prices, and insulin aspart prices were at 2.6–3.5 times the estimated prices. It is important to note that the countries included in price comparisons differ by type of insulin, and government procurement prices reported by the ACCISS study are for any presentation (phial, prefilled pen, cartridge), while our estimated prices are for phials only.

Figure 2

Prices of insulins in selected countries: (A) regular human insulin, (B) insulin glargine, (C) insulin lispro and (D) insulin aspart. Prices are for 10 mL (1000 units) in government procurement and for any presentation. Data from the ACCISS study4, the British National Formulary, and the National Acquisition Center (CCST) Pharmaceutical Catalog Search tool. ACCISS, Addressing the Challenge and Constraints of Insulin Sources and Supply; GCC, Gulf Cooperation Council; PDR, People’s Democratic Republic; UNRWA, the United Nations Relief and Works Agency for Palestine Refugees in the Near East.

Sensitivity analysis

Across the different potential assumptions discussed in this analysis, the final estimated prices were most sensitive to the assumption regarding phial formulation and packaging cost, followed by API cost (table 2). If the assumed cost of phial materials and formulation is changed from the current ‘competitive formula’ assumption (US$0.09/phial) to the highest available estimate (US$5.00/phial), the estimated price of RHI triples from US$48/year to US$151/year, but the prices of analogues approximately double from US$78–98/year to US$181–201/year (except detemir).

Table 2

Sensitivity analysis: effects of changes in costing assumptions on cost of insulin per year (percentage change relative to base case)

Assumption	RHI	Glargine	Aspart	Lispro	Glulisine	Detemir	Degludec
Base case (competitive formula)	US$48	US$78	US$95	US$95	US$94	US$283	US$98
API cost
Doubled	US$63 (+31%)	US$122 (+56%)	US$156 (+64%)	US$157 (+65%)	US$155 (+65%)	US$533 (+88%)	US$162 (+55%)
Halved	US$40 (−17%)	US$56 (−28%)	US$64 (−33%)	US$64 (−33%)	US$63 (−33%)	US$158 (−44%)	US$66 (−33%)
Cost of phial formulation and packaging materials
US$5.00/phial	US$151 (+215%)	US$181 (+132%)	US$198 (+108%)	US$198 (+108%)	US$197 (+109%)	US$387 (+37%)	US$201 (+105%)
US$0.05/phial	US$47 (−2%)	US$77 (−1%)	US$94 (−1%)	US$94 (−1%)	US$93 (−1%)	US$282 (−0%)	US$97 (−1%)
Operating margin
Higher—50%	US$60 (+25%)	US$97 (+25%)	US$119 (+25%)	US$119 (+25%)	US$118 (+25%)	US$354 (+25%)	US$123 (+25%)
Lower—10%	US$44 (−8%)	US$71 (−8%)	US$87 (−8%)	US$87 (−8%)	US$86 (−8%)	US$260 (−8%)	US$90 (−8%)

Insulin NPH omitted, as its cost breakdown and sensitivity analyses are very similar to RHI. Use of 10 mL 1000-unit phials assumed, with 14.6 phials used per year (40 units per day).

API, active pharmaceutical ingredient;NPH, neutral protamine Hagedorn;RHI, regular human insulin.

Halving and doubling the estimated API price resulted in changes of –17% to +88%. Changing the assumed operating margin from the base case 20%–10% or 50% resulted in changes to estimated price of –8% to +25%.

Based on these figures, we calculated an estimated cost of production of US$1.45–9.64 per item, depending on assumptions regarding the number of units sold and the proportion of items sold that contained 300 vs 1000 units of insulin (online supplementary appendix).

Discussion

It may be possible to profitably manufacture biosimilars of recombinant human insulin and insulin NPH for a price of US$72 per patient per year or less. Biosimilars of insulin analogues—lispro, aspart, glargine, glulisine and degludec—may be profitably manufactured for prices of US$133 per patient per year or less. With high levels of competition, our estimates suggested that prices could fall to US$48 per year for biosimilars of human insulin and US$78–98 for insulin analogues (table 1). Comparison of estimated prices with recent government procurement prices suggests that robust competition in the human insulin and insulin analogue market would lead to sizeable savings in most countries and that current manufacturers could set significantly lower prices while still making a profit (figure 2).

Price estimates were based on observed prices of API exported from India for RHI, NPH and insulin glargine. For other analogues, assumptions for API costs were based on quotes from biosimilar manufacturers and similarities in structure and process. Given the high level of similarity in molecular structure and manufacturing process, the relatively high price quoted by biosimilar manufacturers for insulin aspart compared with RHI is likely due to differences in demand volumes. Nevertheless, we conservatively assumed that other analogues for which export data were not available were priced similarly. Our estimated prices included a profit margin, a margin to account for transportation and import costs, and a conservative estimate for biosimilar development cost, which we assumed would be recouped equally in resource-limited and high-income markets (rather than at differentiated margins). As a point of comparison, we also estimated the cost of production per item using expense reports from Novo Nordisk (online supplementary appendix), which yielded estimates that were similar to the estimates made based on API prices.

The assumed API costs were in the middle of the range of production costs estimated for monoclonal antibodies (US$20 000–300 000/kg), which are much larger molecules and whose manufacture is more complex.18 31 The prices estimated for RHI were in some cases higher than the prices reported in the ACCISS study (figure 2A).4 This finding likely reflects a combination of conservative assumptions and ‘front-loading’ of the costs of bringing a biosimilar to the market (we assumed that these sunk costs were to be recouped in the first 5 years of sales), which the three big current manufacturers will likely have already recouped many years ago. This finding also suggests that in a small number of countries, insulin biosimilars may initially be marginally more expensive than the lowest prices offered by originators in some contexts. In some countries, where originators offer low prices, in order to encourage a competitive and sustainable market for insulins, new market entrants may need to be supported by procuring at prices that are slightly above the lowest prices available from an originator (such strategies are well established in HIV, tuberculosis and malaria32).

Our estimated prices demonstrate that the price of biosimilar of insulin analogues (except detemir) would not be expected to be more than two times that of RHI, even given conservative assumptions regarding analogue API prices based on low demand volumes (table 1). Estimated prices for insulin analogues were 1.9–2.0 times higher than the estimated price for RHI (except detemir: 5.1–5.9 times higher). This price differential is far smaller than the differentials currently seen in LMIC markets (figure 2). Due to the high level of similarity in molecular structure and manufacture processes, the difference in API price between RHI and analogues is likely explained by the relatively young biosimilars market, differences in demand volumes, different levels of process optimisation, and other overheads such as regulatory costs. If this is true, then the price of API for analogues could rapidly fall to near the price of RHI API. Due to increasing rates of type 1 and 2 diabetes, global demand for insulin API could rise to more than 16 000 kg per year by 2025.1 3 In order to meet this increasing demand, new manufacture facilities will likely need to be built. The cost of these facilities is included in our estimated prices, as it is included in the assumed costs of bringing a biosimilar to market. Governments may offer additional incentives to develop local biosimilar manufacturing capacity, for example, in the form of tax incentives.

Our estimates suggest that yearly treatment with biosimilars of human insulin or insulin analogues could have drug costs similar to, or lower than, current lowest prices for first-line treatments for HIV, for which major international treatment programmes have led to 19.5 million people receiving treatment in 2016.33 34 At the estimated prices, comprehensive treatment of an estimated 19 million people living with type 1 diabetes would cost US$0.9–1.4 billion per year using biosimilar human insulin and insulin NPH, and US$1.5–2.5 billion using biosimilar insulin analogues other than detemir. For comparison, LMIC antiretroviral sales were estimated to be US$1.8 billion in 2014.35 With the global insulin market estimated to be US$32 billion in 2019,4 significant savings would appear to be possible if insulins became available at the prices estimated in this analysis.

Prices for the API are falling: even at the low volumes currently being exported from India, the linear regression models showed 18% yearly decrease in price for exported human insulin API and 27% yearly decrease for insulin glargine. It would be reasonable to expect that with increasing biosimilar production, API prices will continue to fall. More than half of relevant patents protect devices related to insulin treatment, rather than API, and most patents on insulin analogue APIs have expired or are expiring by 2020 in the USA.36 37

The need for price reductions for insulin analogues is made more pressing by the fact that analogues are replacing RHI in high-income countries and a growing number of middle-income countries, despite a lack of evidence for significant clinical benefit.1 If this trend continues, markets for RHI may collapse. Simultaneously, the volume demand for insulins is expected to rise dramatically in the coming decades.3

To stimulate the development of a competitive biosimilars market for insulins, a range of procompetitive policy approaches are available to governments and the international community. These include tenders and special incentives for the first non-originator market entrant. International pooled procurement mechanisms like the Pan American Health Organization’s Revolving Fund and Strategic Fund could also play a role in supporting a competitive biosimilar insulin market for supply of LMICs. Although current analyses suggest that intellectual property (IP) does not pose a significant barrier to biosimilar insulins, if IP barriers did become apparent in some cases, voluntary or compulsory licences could be sought to enable biosimilar production.1 5 Lastly, technology transfer from originator companies to LMIC manufacturers—ie, the transfer of know-how regarding manufacturing processes and/or the transfer of materials such as cell banks—would likely significantly lower the barrier to developing a biosimilar. Other measures to control insulin prices, which are discussed in more detail elsewhere, would remain important, including consideration of import taxes, and controls on distributor and pharmacy mark-ups.1

Earlier commentators have predicted that the price reductions offered by biosimilars will be modest, with many giving estimates for expected price reductions in the range of 10%–70%38; however, the biosimilar market is very young, with a low number of competitive manufacturers for individual products. Recently price reductions as great as 70% have been seen for biosimilar infliximab.39 Price reductions for the first insulin biosimilar available in the USA or Europe—a biosimilar of insulin glargine—have also arguably been modest (a second biosimilar has been approved in the European Union in the past few months, but pricing data are not yet available),40 although large price reductions would not be expected with the first non-originator market entrant. As a point of comparison, the price estimated in this analysis for insulin glargine is about 60%–80% lower than prices of originator insulin glargine in high-income countries.40 Our cost-based estimates thus lie at the higher end of the range of the price reductions predicted earlier by commentators.38

In some jurisdictions, there are insulin-specific regulatory requirements that are less demanding than for biosimilars more broadly.41 However, as for all biosimilars, there are challenges with impurities and within-product variability.38 42 Indian companies have previously sought, and failed, to gain market approval for biosimilar insulins in the European market.7 To address these issues, the WHO is exploring the possibility of using the prequalification programme for insulins.43

Limitations

The key limitation of our analysis is the large number of assumptions that were necessary in order to arrive at estimates of biosimilar prices.

There are expenses in biosimilar manufacture that are not individually considered in this analysis, such as capital expenditures, quality assurance and control, registration costs, costs associated with adherence to manufacturing regulations, and maintaining an aseptic manufacturing process. However, we have included a conservative assumption for the total costs of bringing a biosimilar to market. In addition, many of these costs are likely to be already represented in the estimated costs of API, which are based on completed sales and/or price quotes. By removing the cost of paying a profit margin to a third-party API manufacturer, inhouse production of API or domestic rather than international procurement would likely reduce costs and result in lower prices, or afford manufacturers higher profit margins, than the prices estimated in this analysis. Similarly, the assumed cost of formulation for the ‘conservative’ formula is based on sales prices of finished phial products, which would also include capital, quality control and operating expenditures.

Our estimated prices assume purchase directly from the manufacturer, including a mark-up for transportation costs. Final prices to patients or health systems may include additional mark-ups added during the supply chain.1 These mark-ups will vary between countries, as they may be subject to local negotiations, regulations and other factors. In some cases, these additional mark-ups can be very large. Beyond a margin for import tariffs and transport, we have not included estimates for these mark-ups as our estimates (and comparisons with current prices) are made from the perspective of government procurement. High supply chain mark-ups, where they exist, would be a priority target for cost-containment measures.

We estimated sustainable prices for the 10 mL phial formulation and did not estimate the price of pen or cartridge formulations. This limits the ability to compare estimated prices with current lowest prices as reported by the ACCISS study, as the figures in the ACCISS study are reported for insulins in any formulation4 (figure 2). Our analysis is primarily focused on resource-limited countries, where the majority of insulins are formulated in phials.4 The added costs for producing other formulations, such as self-injections pens, could be the subject of future work.

Conclusion

Given a robust, competitive biosimilars market, it may be possible to profitably manufacture biosimilar insulins at prices of US$72 per year or less for human insulin and US$133 per year or less for insulin analogues. In order for this to happen, multiple competitors would likely need to enter the market. Production costs are only one element and, as with HIV/AIDS, an important step will be political recognition that diabetes can benefit from large, international treatment expansion plans, as well as regulatory coordination and market shaping. The WHO prequalification of biosimilar insulins, if and when realised, is likely to significantly encourage global competition, but companies need to be sure that the insulin they produce will be purchased. It could be posited that more insulin would be purchased globally if biosimilars became available at the estimated prices, thereby expanding the market.