Literature DB >> 30010500

A new lumbar fixation device alternative to pedicle-based stabilization for lumbar spine: In vitro cadaver investigation.

Cengiz Gomleksiz1, Deniz Ufuk Erbulut2, Halil Can1, Manoj Kumar Kodigudla2, Amey V Kelkar2, Eser Kasapoglu3, Ali Fahir Ozer4, Vijay K Goel2.   

Abstract

Context: To evaluate the stability provided by a new bilateral fixation technique using an in vitro investigation for posterior lumbar segmental instrumentation.Design: Experimental cadaver study. In this study, we propose an alternative technique for a posterior lumbar fixation technique called "inferior-oblique transdiscal fixation" (IOTF).Setting: Study performed at Engineering Center for Orthopedic Research Exellence (ECORE) in Toledo University-Ohio.Participants: Six human lumbar cadaveric specimen used in this study.Interventions: In this study, we propose an alternative technique for a posterior lumbar fixation technique called "inferior-oblique transdiscal fixation" (IOTF). As a novel contribution to the classical technique, the entry point of the screw is the supero-lateral point of the intersecting line drawn between the corpus and the pedicle of the upper vertebra. This approach enables the fixation of two adjacent vertebrae using a single screw on each side without utilizing connecting rods.Outcome Measures: Flexion (Flex), extension (Ext), right and left lateral bending (LB & RB), and right and left axial rotation (LR & RR), and the position data were captured at each load step using the Optotrak motion measurement system and compared for IOTF and posterior transpedicular stabilization.
Results: The Posterior stabilization system (PSS) and IOTF significantly reduced the ROM of L4-L5 segment compared to intact segment's ROM. During axial rotation (AR) IOTF fused index segment more than PSS. Besides this, addition of transforaminal lumbar interbody fusion (TLIF) cage improved the stabilization of IOTF system during flexion, extension and lateral bending. Whereas, PSS yielded better fusion results during extension compared to IOTF with and without interbody fusion cages.Conclusions: We hypothesized that the new posterior bilateral system would significantly decrease motion compared to the intact spine. This cadaver study showed that the proposed new posterior fusion technique IOTF fused the index segment in a similar fashion to the classical pedicle screw fusion technique.

Entities:  

Keywords:  Bilateral system; In vitro lumbar; Lumbar fusion; Lumbar spine; Pedicle screw fixation; Posterior fixation

Mesh:

Year:  2018        PMID: 30010500      PMCID: PMC7006719          DOI: 10.1080/10790268.2018.1495932

Source DB:  PubMed          Journal:  J Spinal Cord Med        ISSN: 1079-0268            Impact factor:   1.985


  15 in total

1.  Posterior percutaneous spine instrumentation.

Authors:  G L Lowery; S S Kulkarni
Journal:  Eur Spine J       Date:  2000-02       Impact factor: 3.134

2.  The biomechanical effect of pedicle screws' insertion angle and position on the superior adjacent segment in 1 segment lumbar fusion.

Authors:  Ho-Joong Kim; Heoung-Jae Chun; Kyoung-Tak Kang; Seong-Hwan Moon; Hak-Sun Kim; Jin-Oh Park; Eun-Su Moon; Bo-Ram Kim; Joon-Seok Sohn; Yu-Na Ko; Hwan-Mo Lee
Journal:  Spine (Phila Pa 1976)       Date:  2012-09-01       Impact factor: 3.468

Review 3.  Dynamic stabilization devices in the treatment of low back pain.

Authors:  D K Sengupta
Journal:  Neurol India       Date:  2005-12       Impact factor: 2.117

4.  Use of instrumented pedicle screws to evaluate load sharing in posterior dynamic stabilization systems.

Authors:  Kathleen Meyers; Michael Tauber; Yuri Sudin; Shai Fleischer; Uri Arnin; Federico Girardi; Timothy Wright
Journal:  Spine J       Date:  2007-11-26       Impact factor: 4.166

5.  A new technic for segmental spinal osteosynthesis using the posterior approach.

Authors:  Y Cotrel; J Dubousset
Journal:  Orthop Traumatol Surg Res       Date:  2014-01-18       Impact factor: 2.256

6.  Pedicle screw-based posterior dynamic stabilisation of the lumbar spine: in vitro cadaver investigation and a finite element study.

Authors:  T Oktenoglu; D U Erbulut; A Kiapour; A F Ozer; I Lazoglu; T Kaner; M Sasani; V K Goel
Journal:  Comput Methods Biomech Biomed Engin       Date:  2014-04-08       Impact factor: 1.763

7.  [Osteosynthesis of dorsal, lumbar, and lumbosacral spine with metallic plates screwed into vertebral pedicles and articular apophyses].

Authors:  R Roy-Camille; M Roy-Camille; C Demeulenaere
Journal:  Presse Med       Date:  1970-06       Impact factor: 1.228

8.  The classic: the original paper appeared in the New York Medical Journal 93:1013, 1911. I. An operation for progressive spinal deformities: a preliminary report of three cases from the service of the orthopaedic hospital.

Authors: 
Journal:  Clin Orthop Relat Res       Date:  1964 Jul-Aug       Impact factor: 4.176

9.  Accuracy of free-hand pedicle screws in the thoracic and lumbar spine: analysis of 6816 consecutive screws.

Authors:  Scott L Parker; Matthew J McGirt; S Harrison Farber; Anubhav G Amin; Anne-Marie Rick; Ian Suk; Ali Bydon; Daniel M Sciubba; Jean-Paul Wolinsky; Ziya L Gokaslan; Timothy F Witham
Journal:  Neurosurgery       Date:  2011-01       Impact factor: 4.654

10.  Complications of pedicle screws in lumbar and lumbosacral fusions in 105 consecutive primary operations.

Authors:  P C Jutte; R M Castelein
Journal:  Eur Spine J       Date:  2002-10-15       Impact factor: 3.134

View more
  1 in total

1.  Influence of posterior pedicle screw fixation at L4-L5 level on biomechanics of the lumbar spine with and without fusion: a finite element method.

Authors:  Emre Sengul; Ramazan Ozmen; Mesut Emre Yaman; Teyfik Demir
Journal:  Biomed Eng Online       Date:  2021-10-07       Impact factor: 2.819

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.