Literature DB >> 29952540

Li and Mg Co-Doped Zinc Oxide Electron Transporting Layer for Highly Efficient Quantum Dot Light-Emitting Diodes.

Hyo-Min Kim1, Sinyoung Cho1, Jeonggi Kim1, Hyeonjeong Shin1, Jin Jang1.   

Abstract

Zinc-oxide (ZnO) is widely used as an n-type electron transporting layer (ETL) for quantum dot (QD) light-emitting diode (QLED) because various metal doping can be possible and ZnO nanoparticle can be processed at low temperatures. We report here a Li- and Mg-doped ZnO, MLZO, which is used for ETL of highly efficient and long lifetime QLEDs. Co-doping, Mg and Li, in ZnO increases its band gap and electrical resistivity and thus can enhance charge balance in emission layer (EML). It is found also that the O-H concentration at the oxide surface decreases and exciton decay time of QDs on the metal oxide increases by co-doping in ZnO. The inverted green QLEDs with MLZO ETL exhibits the maximum current efficiency (CEmax) of 69.1 cd/A, power efficiency (PEmax) of 73.8 lm/W, and external quantum efficiency (EQEmax) of 18.4%. This is at least two times higher compared with the efficiencies of the QLEDs with Mg-doped ZnO ETL. The optimum Li and Mg concentrations are found to be 10% each. The deep-red, red, light-blue, and deep-blue QLEDs with MLZO ETLs exhibit the CEmax of 6.0, 22.3, 1.9, and 0.5 cd/A, respectively. The MLZO introduced here can be widely used as ETL of highly efficient QLEDs.

Entities:  

Keywords:  QLED; co-doped ZnO; metal oxide; quantum-dot; solution process

Year:  2018        PMID: 29952540     DOI: 10.1021/acsami.8b04721

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  7 in total

1.  Al-, Ga-, Mg-, or Li-doped zinc oxide nanoparticles as electron transport layers for quantum dot light-emitting diodes.

Authors:  Alexei Alexandrov; Mariya Zvaigzne; Dmitri Lypenko; Igor Nabiev; Pavel Samokhvalov
Journal:  Sci Rep       Date:  2020-05-04       Impact factor: 4.379

2.  Stability of Quantum-Dot Light Emitting Diodes with Alkali Metal Carbonates Blending in Mg Doped ZnO Electron Transport Layer.

Authors:  Hyo-Min Kim; Wonkyeong Jeong; Joo Hyun Kim; Jin Jang
Journal:  Nanomaterials (Basel)       Date:  2020-12-04       Impact factor: 5.076

3.  Utilization of Nanoporous Nickel Oxide as the Hole Injection Layer for Quantum Dot Light-Emitting Diodes.

Authors:  Wei-Sheng Chen; Sheng-Hsiung Yang; Wei-Cheng Tseng; Wilson Wei-Sheng Chen; Yuan-Chang Lu
Journal:  ACS Omega       Date:  2021-05-12

4.  Metal oxide charge transfer complex for effective energy band tailoring in multilayer optoelectronics.

Authors:  Moohyun Kim; Byoung-Hwa Kwon; Chul Woong Joo; Myeong Seon Cho; Hanhwi Jang; Ye Ji Kim; Hyunjin Cho; Duk Young Jeon; Eugene N Cho; Yeon Sik Jung
Journal:  Nat Commun       Date:  2022-01-10       Impact factor: 14.919

5.  A dual-functional flexible sensor based on defects-free Co-doped ZnO nanorods decorated with CoO clusters towards pH and glucose monitoring of fruit juices and human fluids.

Authors:  Muhammad Hilal; Woochul Yang
Journal:  Nano Converg       Date:  2022-03-22

6.  Intense pulsed light (IPL) annealed sol-gel derived ZnO electron injector for the production of high efficiency inverted quantum dot light emitting devices (QLEDs).

Authors:  Poopathy Kathirgamanathan; Muttulingam Kumaraverl; Raghava Reddy Vanga; Seenivasagam Ravichandran
Journal:  RSC Adv       Date:  2018-10-30       Impact factor: 4.036

7.  Mixture of quantum dots and ZnS nanoparticles as emissive layer for improved quantum dots light emitting diodes.

Authors:  Taeyoung Song; Jun Young Cheong; Hyunjin Cho; Il-Doo Kim; Duk Young Jeon
Journal:  RSC Adv       Date:  2019-05-15       Impact factor: 3.361

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.