Maiko Shikama1, Gojiro Nakagami1,2, Hiroshi Noguchi2,3, Taketoshi Mori2,3, Hiromi Sanada4,2. 1. Department of Gerontological Nursing/Wound Care Management, The University of Tokyo, Japan. 2. Global Nursing Research Center, The University of Tokyo, Japan. 3. Department of Life Support Technology (Molten), The University of Tokyo, Tokyo, Japan. 4. Department of Gerontological Nursing/Wound Care Management, The University of Tokyo, Japan. hsanada-tky@umin.ac.jp.
Abstract
BACKGROUND:Pressure ulcers related to oronasal masks used with noninvasive ventilation (NIV), along with patient discomfort, occur due to improper fit of the mask. We developed a personalized fitting device using a 3-dimensional (3D) scanning solution to prevent the formation of NIV mask-related pressure ulcers. This study aimed to evaluate the effectiveness of the proposed personalized fitting device. METHODS: We conducted a randomized crossover experimental study of 20 healthy participants to study the use of this personalized fitting device between the face and an NIV mask designed with 3D solutions. The fitting device was not used under the NIV mask for the control. The outcome measures were the presence of blanchable erythema, standardized redness intensity, discomfort level, and contact pressure. RESULTS: The incidence of blanchable erythema and standardized redness intensity values were significantly lower for subjects who used the fitting device when worn for 30 min (P < .001). The discomfort levels at the forehead, nasal bridge, and both cheeks, as well as leakage, were significantly reduced as well (P = .008, P < .001, P = .001, P = .002, P = .001, P = .02, P < .001, P < .001, P < .001). Contact pressure at the nasal bridge, where pressure ulcers most frequently develop, was significantly decreased with the fitting device (P < .001). CONCLUSIONS: Personalized fitting devices that incorporate 3D scanning solutions may contribute to the prevention of NIV mask-related pressure ulcers and the reduction of discomfort.
RCT Entities:
BACKGROUND: Pressure ulcers related to oronasal masks used with noninvasive ventilation (NIV), along with patient discomfort, occur due to improper fit of the mask. We developed a personalized fitting device using a 3-dimensional (3D) scanning solution to prevent the formation of NIV mask-related pressure ulcers. This study aimed to evaluate the effectiveness of the proposed personalized fitting device. METHODS: We conducted a randomized crossover experimental study of 20 healthy participants to study the use of this personalized fitting device between the face and an NIV mask designed with 3D solutions. The fitting device was not used under the NIV mask for the control. The outcome measures were the presence of blanchable erythema, standardized redness intensity, discomfort level, and contact pressure. RESULTS: The incidence of blanchable erythema and standardized redness intensity values were significantly lower for subjects who used the fitting device when worn for 30 min (P < .001). The discomfort levels at the forehead, nasal bridge, and both cheeks, as well as leakage, were significantly reduced as well (P = .008, P < .001, P = .001, P = .002, P = .001, P = .02, P < .001, P < .001, P < .001). Contact pressure at the nasal bridge, where pressure ulcers most frequently develop, was significantly decreased with the fitting device (P < .001). CONCLUSIONS: Personalized fitting devices that incorporate 3D scanning solutions may contribute to the prevention of NIV mask-related pressure ulcers and the reduction of discomfort.
Authors: Marit Bockstedte; Alexander B Xepapadeas; Sebastian Spintzyk; Christian F Poets; Bernd Koos; Maite Aretxabaleta Journal: J Pers Med Date: 2022-04-08
Authors: Filip Raciborski; Mateusz Jankowski; Mariusz Gujski; Jarosław Pinkas; Piotr Samel-Kowalik; Artur Zaczyński; Igor Pańkowski; Kamil Rakocy; Waldemar Wierzba Journal: Int J Environ Res Public Health Date: 2020-12-04 Impact factor: 3.390
Authors: Kelvin Duong; Joel Glover; Alexander C Perry; Deborah Olmstead; Mark Ungrin; Pina Colarusso; Joanna E MacLean; Andrew R Martin Journal: ERJ Open Res Date: 2021-02-01