Literature DB >> 29784348

Flow manifold for chemical H-point standard addition method implemented to electrochemical analysis based on the capacitance measurements.

Marcin Wieczorek1, Maria Madej2, Karolina Starzec2, Paweł Knihnicki2, Anna Telk2, Jolanta Kochana2, Paweł Kościelniak2.   

Abstract

The paper presents a novel analytical method for electrochemical potassium determination using gold electrodes with self-assembled thiol monolayers (SATMs) deposited on its surface. The whole analytical procedure was carried out in a dedicated flow manifold using capacitance detection mode. The terminal functional groups on the surface of the dielectric monolayer interacts selectively with the analyte, changing the thickness of the layer depending on the amount of the analyte and the applied voltage, resulting in a change in the registered dielectric capacitance. New calibration approach based on the Chemical H-point Standard Addition Method (C-HPSAM), allowing both specific (proportional) and unspecific (constant) interference effects caused by sodium ions to be corrected, was applied. The calibration method is based on the registration of the calibration graphs by the standard addition method (SAM) three times in such different chemical conditions, which are able to differentiate the slope of each graph. The C-HPSAM was applied for the first time in electrochemical analysis. As a chemical parameter differentiating the sensitivity of the calibration graphs, the concentration of ionic strength stabilizer (ethylenediamine) was used. In order to improve the analytical procedure, to make it faster and automated, the dedicated flow system was applied. The constructed flow system was composed of several modules individually dedicated to the appropriate step of the whole analytical procedure: electrochemical cleaning of work electrode surface, adsorption of SATMs and analytical calibration. The calibration curves were obtained in the range of 0.1-0.9 mmol L-1 with good linearity (R2 = 0.996 ± 0.001) and the LOD and LOQ of 28.6 and 85.8 μmol L-1, respectively. The proposed method was employed for potassium determination in highly mineralized water, juice and pharmaceutical samples without any special pretreatment.
Copyright © 2018 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Capacitance measurements; Electrostriction; Flow technique; H-point standard addition method; Potassium determination

Year:  2018        PMID: 29784348     DOI: 10.1016/j.talanta.2018.03.098

Source DB:  PubMed          Journal:  Talanta        ISSN: 0039-9140            Impact factor:   6.057


  1 in total

1.  The Use of an Acylhydrazone-Based Metal-Organic Framework in Solid-Contact Potassium-Selective Electrode for Water Analysis.

Authors:  Paweł Kościelniak; Marek Dębosz; Marcin Wieczorek; Jan Migdalski; Monika Szufla; Dariusz Matoga; Jolanta Kochana
Journal:  Materials (Basel)       Date:  2022-01-13       Impact factor: 3.623

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.