OBJECTIVES: To evaluate the esthetics and frictional force of an orthodontic wire passed through a newly designed tube made of a polyether ether ketone (PEEK) resin. MATERIALS AND METHODS: Two types of standard PEEK tubes were prepared at 0.5 × 0.6ф and 0.8 × 0.9ф, and different archwires were passed through the tubes. Color values were determined according to brightness and hues. Friction was assessed with different bracket-wire combinations, and surface roughness was determined by stereomicroscopy before and after the application of friction. RESULTS: The PEEK tube showed a color difference that was almost identical to that of coated wires conventionally used in clinical practice, indicating a sufficient esthetic property. The result of the friction test showed that the frictional force was greatly reduced by passing the archwire through the PEEK tube in almost all of the archwires tested. CONCLUSIONS: Use of the new PEEK tube demonstrated a good combination of esthetic and functional properties for use in orthodontic appliances.
OBJECTIVES: To evaluate the esthetics and frictional force of an orthodontic wire passed through a newly designed tube made of a polyether ether ketone (PEEK) resin. MATERIALS AND METHODS: Two types of standard PEEK tubes were prepared at 0.5 × 0.6ф and 0.8 × 0.9ф, and different archwires were passed through the tubes. Color values were determined according to brightness and hues. Friction was assessed with different bracket-wire combinations, and surface roughness was determined by stereomicroscopy before and after the application of friction. RESULTS: The PEEK tube showed a color difference that was almost identical to that of coated wires conventionally used in clinical practice, indicating a sufficient esthetic property. The result of the friction test showed that the frictional force was greatly reduced by passing the archwire through the PEEK tube in almost all of the archwires tested. CONCLUSIONS: Use of the new PEEK tube demonstrated a good combination of esthetic and functional properties for use in orthodontic appliances.
Authors: Jeffrey M Toth; Mei Wang; Bradley T Estes; Jeffrey L Scifert; Howard B Seim; A Simon Turner Journal: Biomaterials Date: 2005-08-22 Impact factor: 12.479
Authors: Ludan Qin; Shuo Yao; Jiaxin Zhao; Chuanjian Zhou; Thomas W Oates; Michael D Weir; Junling Wu; Hockin H K Xu Journal: Materials (Basel) Date: 2021-01-15 Impact factor: 3.623