Literature DB >> 22591261

Color stability and fluorescence of different orthodontic esthetic archwires.

Dayanne Lopes da Silva1, Claudia Trindade Mattos, Marcus Vinicius Almeida de Araújo, Antônio Carlos de Oliveira Ruellas.   

Abstract

OBJECTIVE: To evaluate the color stability of six esthetic archwires at different time periods and their fluorescence.
MATERIALS AND METHODS: Samples were evaluated after 7, 14, and 21 days of immersion in staining solution. Color measurements were performed by means of a spectrophotometer according to the Commission Internationale de I'Eclairage L*a*b* system, and color changes (ΔE*) and National Bureau of Standards units were computed. The fluorescence of as-received samples was evaluated by two observers and compared with that of a bovine central incisor. Statistical differences were investigated using analysis of variance and Tukey's post hoc test.
RESULTS: All brands showed statistically significant color change after 21 days (ΔE* from 1.88 to 12.06). The Optis archwire (fiber-reinforced composite) presented the highest color alteration, although staining was observed only near its ends. The Trianeiro archwire (coated nickel-titanium) and the Ortho Organizers archwire (coated stainless steel) presented with less color change. The Optis archwire was the only one that presented with fluorescence similar to that of bovine teeth.
CONCLUSIONS: All esthetic archwires assessed showed clinically noticeable color change after 21 days in staining solution. The optical properties of currently available esthetic archwires may not yet be ideal.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22591261      PMCID: PMC8805526          DOI: 10.2319/121311-764.1

Source DB:  PubMed          Journal:  Angle Orthod        ISSN: 0003-3219            Impact factor:   2.079


  18 in total

1.  Color stability of orthodontic adhesive resins.

Authors:  Theodore Eliades; Christiana Gioka; Matthew Heim; George Eliades; Margarita Makou
Journal:  Angle Orthod       Date:  2004-06       Impact factor: 2.079

Review 2.  Aesthetic orthodontic brackets.

Authors:  J S Russell
Journal:  J Orthod       Date:  2005-06

3.  Color stability of resin composites after immersion in different drinks.

Authors:  Ertan Ertaş; Ahmet Umut Güler; Ali Cağin Yücel; Hülya Köprülü; Eda Güler
Journal:  Dent Mater J       Date:  2006-06       Impact factor: 2.102

4.  Discolouration of orthodontic adhesives caused by food dyes and ultraviolet light.

Authors:  Andreas Faltermeier; Martin Rosentritt; Claudia Reicheneder; Michael Behr
Journal:  Eur J Orthod       Date:  2007-09-14       Impact factor: 3.075

5.  Color stability of different denture teeth materials against various staining agents.

Authors:  Temel Koksal; Idil Dikbas
Journal:  Dent Mater J       Date:  2008-01       Impact factor: 2.102

Review 6.  Advances in fixed appliance design and use: 1. Brackets and archwires.

Authors:  K M Postlethwaite
Journal:  Dent Update       Date:  1992-09

7.  Mechanical properties of coated superelastic archwires in conventional and self-ligating orthodontic brackets.

Authors:  Firas Elayyan; Nick Silikas; David Bearn
Journal:  Am J Orthod Dentofacial Orthop       Date:  2010-02       Impact factor: 2.650

8.  Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain.

Authors:  R R Seghi; E R Hewlett; J Kim
Journal:  J Dent Res       Date:  1989-12       Impact factor: 6.116

9.  Removing hepatitis C virus from polytetrafluoroethylene-coated orthodontic archwires and other dental instruments.

Authors:  A A Ramadan
Journal:  East Mediterr Health J       Date:  2003-05       Impact factor: 1.628

10.  Color stability of provisional prosthodontic materials.

Authors:  Arthur S K Sham; Frederick C S Chu; John Chai; Tak W Chow
Journal:  J Prosthet Dent       Date:  2004-05       Impact factor: 3.426

View more
  8 in total

1.  Mechanical properties of orthodontic wires covered with a polyether ether ketone tube.

Authors:  Nobukazu Shirakawa; Toshio Iwata; Shinjiro Miyake; Takero Otuka; So Koizumi; Toshitugu Kawata
Journal:  Angle Orthod       Date:  2018-03-21       Impact factor: 2.079

2.  Effect of Grit-blasting on the Color Stability of Zirconia Ceramics Following Exposure to Beverages.

Authors:  Samer Alaqeel
Journal:  Cureus       Date:  2020-03-03

3.  Effects of intraoral aging on surface properties of coated nickel-titanium archwires.

Authors:  Roberto Rongo; Gianluca Ametrano; Antonio Gloria; Gianrico Spagnuolo; Angela Galeotti; Sergio Paduano; Rosa Valletta; Vincenzo D'Antò
Journal:  Angle Orthod       Date:  2013-12-05       Impact factor: 2.079

4.  Coating stability and surface characteristics of esthetic orthodontic coated archwires.

Authors:  Dayanne Lopes da Silva; Claudia Trindade Mattos; Renata Autoun Simão; Antônio Carlos de Oliveira Ruellas
Journal:  Angle Orthod       Date:  2013-05-08       Impact factor: 2.079

5.  Color stability of laboratory glass-fiber-reinforced plastics for esthetic orthodontic wires.

Authors:  Toshihiro Inami; Yasuhiro Tanimoto; Naomi Minami; Masaru Yamaguchi; Kazutaka Kasai
Journal:  Korean J Orthod       Date:  2015-05-15       Impact factor: 1.372

6.  Evaluation of the mechanical properties and surface topography of as-received, immersed and as-retrieved orthodontic archwires.

Authors:  Silvia Izabella Pop; Mircea Dudescu; Violeta Valentina Merie; Mariana Pacurar; Cristina Dana Bratu
Journal:  Clujul Med       Date:  2017-07-15

7.  Discoloration and force degradation of orthodontic elastomeric ligatures.

Authors:  Samaneh Nakhaei; Raha Habib Agahi; Amin Aminian; Masoud Rezaeizadeh
Journal:  Dental Press J Orthod       Date:  2017 Mar-Apr

8.  Colour stabilities of three types of orthodontic clear aligners exposed to staining agents.

Authors:  Chen-Lu Liu; Wen-Tian Sun; Wen Liao; Wen-Xin Lu; Qi-Wen Li; Yunho Jeong; Jun Liu; Zhi-He Zhao
Journal:  Int J Oral Sci       Date:  2016-12-16       Impact factor: 6.344

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.