Literature DB >> 29525169

Surface modification of PES membrane via aminolysis and immobilization of carboxymethylcellulose and sulphated carboxymethylcellulose for hemodialysis.

Vahid Hoseinpour1, Azadeh Ghaee2, Vahid Vatanpour3, Nasser Ghaemi4.   

Abstract

Sulphated carboxymethylcellulose (SCMC) was synthesized and characterized via FT-IR and CHNS analysis. The PES membranes were prepared and modified via surface amination with an aminolysis reaction and amount of amino groups was measured. The carboxymethylcellulose (CMC) and SCMC were immobilized on the surface of the aminated PES membranes (PES-NH2) via amide bonds to synthesize PES-CMC and PES-SCMC membranes, respectively, and the concentration of immobilized CMC and SCMC was determined. The unmodified PES, PES-CMC, and PES-SCMC membranes were characterized in terms of morphology, overall porosity, mean pore size, zeta potential, tensile strength, contact angle, protein adsorption and platelet adhesion. The results showed a decrease in contact angle, protein adsorption and platelet adhesion in the case of PES-CMC and PES-SCMC compared to unmodified PES membranes, which supported the increased hemocompatibility of the modified membranes especially for the PES-SCMC membrane. Moreover, the PES-CMC and PES-SCMC membranes displayed good antifouling properties, especially for PES-SCMC.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Carboxymethylcellulose; Hemocompatibility; Membrane; Polyethersulfone; Sulphated carboxymethylcellulose

Mesh:

Substances:

Year:  2018        PMID: 29525169     DOI: 10.1016/j.carbpol.2018.01.106

Source DB:  PubMed          Journal:  Carbohydr Polym        ISSN: 0144-8617            Impact factor:   9.381


  4 in total

1.  Chemical Degradation of PSF-PUR Blend Hollow Fiber Membranes-Assessment of Changes in Properties and Morphology after Hydrolysis.

Authors:  Wioleta Sikorska; Monika Wasyłeczko; Małgorzata Przytulska; Cezary Wojciechowski; Gabriel Rokicki; Andrzej Chwojnowski
Journal:  Membranes (Basel)       Date:  2021-01-12

Review 2.  Surface Functionalities of Polymers for Biomaterial Applications.

Authors:  Mioara Drobota; Stefan Ursache; Magdalena Aflori
Journal:  Polymers (Basel)       Date:  2022-06-07       Impact factor: 4.967

3.  Quick and Easy Covalent Grafting of Sulfonated Dyes to CMC: From Synthesis to Colorimetric Sensing Applications.

Authors:  Lisa Rita Magnaghi; Camilla Zanoni; Denise Bellotti; Giancarla Alberti; Paolo Quadrelli; Raffaela Biesuz
Journal:  Polymers (Basel)       Date:  2022-09-27       Impact factor: 4.967

4.  Sulfated carboxymethyl cellulose and carboxymethyl κ-carrageenan immobilization on 3D-printed poly-ε-caprolactone scaffolds differentially promote pre-osteoblast proliferation and osteogenic activity.

Authors:  Sonia Abbasi-Ravasjani; Hadi Seddiqi; Ali Moghaddaszadeh; Mohammad-Ehsan Ghiasvand; Jianfeng Jin; Erfan Oliaei; Rommel Gaud Bacabac; Jenneke Klein-Nulend
Journal:  Front Bioeng Biotechnol       Date:  2022-09-23
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.