| Literature DB >> 29502273 |
Aytaç Karabay1, Jefta D Saija2, David T Field3, Elkan G Akyürek2.
Abstract
In this study, we investigated how the acute physiological effects of cocoa flavanols might result in specific cognitive changes, in particular in temporal and spatial attention. To this end, we pre-registered and implemented a randomized, double-blind, placebo- and baseline-controlled crossover design. A sample of 48 university students participated in the study and each of them completed the experimental tasks in four conditions (baseline, placebo, low dose, and high-dose flavanol), administered in separate sessions with a 1-week washout interval. A rapid serial visual presentation task was used to test flavanol effects on temporal attention and integration, and a visual search task was similarly employed to investigate spatial attention. Results indicated that cocoa flavanols improved visual search efficiency, reflected by reduced reaction time. However, cocoa flavanols did not facilitate temporal attention nor integration, suggesting that flavanols may affect some aspects of attention, but not others. Potential underlying mechanisms are discussed.Entities:
Keywords: Attention; Cocoa flavanols; Rapid serial visual presentation; Temporal integration; Visual search
Mesh:
Substances:
Year: 2018 PMID: 29502273 PMCID: PMC5920121 DOI: 10.1007/s00213-018-4861-4
Source DB: PubMed Journal: Psychopharmacology (Berl) ISSN: 0033-3158 Impact factor: 4.530
Nutritional composition of the study treatments
| Baseline | Placebo | Low dose | High dose | |
|---|---|---|---|---|
| Alkalized cocoa powder (g) | 0 | 11 | 6.5 | 2 |
| Flavanol (mg) | 0 | 0 | 0 | 0 |
| Energy (kcal) | 0 | 33.5 | 19.8 | 6.1 |
| Protein (mg) | 0 | 2442 | 1443 | 444 |
| Fat (mg) | 0 | 1210 | 715 | 220 |
| Caffeine (mg) | 0 | 22 | 13 | 4 |
| Theobromine (mg) | 0 | 231 | 136.5 | 42 |
| High-flavanol cocoa powder (g) | 0 | 0 | 4.5 | 9 |
| Flavanol (mg) | 0 | 0 | 373.5 | 747 |
| Energy (kcal) | 0 | 0 | 15.5 | 31.1 |
| Protein (mg) | 0 | 0 | 1008 | 2016 |
| Fat (mg) | 0 | 0 | 630 | 1260 |
| Caffeine (mg) | 0 | 0 | 9 | 18 |
| Theobromine (mg) | 0 | 0 | 94.5 | 189 |
| Sugar (g) | 20 | 20 | 20 | 20 |
| Hot water (ml) | 300 | 300 | 300 | 300 |
Fig. 1a An illustration of the procedure of the attentional blink/integration task at lag 3 where there are two distractors between targets. Letters are distractors, and targets appear among distractors in rapid succession. Resp. refers to response prompt. Example stimuli are shown in the box on the right bottom corner of the left panel. b An illustration of the procedure of the VS task. Task conditions are illustrated in the lower right corner. T indicates a (color) target, NTO refers to an orientation non-target and NTC means a color non-target. The color of non-targets was always different from the color of the target stimulus. Stimuli always consisted of solid lines. Diagonal line fills indicate color, and dashed line fills represent different colors of the non-target items
Fig. 2a Average T2|T1 (T2 accuracy given that T1 was identified correctly) in percent correct. Error bars represent ± SEM. b Whisker plot of lag-specific T2|T1 performance. Dots represent individual data points
Fig. 3a Frequency of temporal integration (%) in the AB task. Error bars represent ± SEM. b Whisker plot of temporal integration at Lag 1. Dots represent individual data points
Fig. 4Whisker plots of the accuracy in the VS task (% correct), in which dots indicate individual data points. Significant differences are indicated with asterisks (* indicates p < .05; ** indicates p < .01, and *** indicates p < .001). a The left panel shows the main effect of target presence, the right panel shows the main effect of non-target features. b Interaction effect of target presence and non-target features. c Interaction effect of target presence, non-target features and CF
Fig. 5Whisker plots of RT (ms) in the VS task, where dots indicate individual data points. Significant differences are indicated with asterisks (* indicates p < .05; ** indicates p < .01, and *** indicates p < .001). a The left panel shows the main effect of target presence, the right panel shows the main effect of non-target features. b Interaction effect of target presence and non-target features. c Interaction effect of target presence, non-target features and CF
Possible targets in RSVP. CS means corner segments, and the number in front indicates the number of corner segments that the targets consisted of
The Pearson correlation matrix of accuracy and RT in the VS task
| Baseline_TP_NTC | Placebo_TP_NTC | LowDose_TP_NTC | HighDose_TP_NTC | |
|---|---|---|---|---|
| Accuracy | Accuracy | Accuracy | Accuracy | |
| RT | −.10 | −.24 | −.06 | −.10 |
| Baseline_TP_NTO | Placebo_TP_NTO | LowDose_TP_NTO | HighDose_TP_NTO | |
| Accuracy | Accuracy | Accuracy | Accuracy | |
| RT | .11 | −.30* | −.07 | −.50 |
| Baseline_TA_NTC | Placebo_TA_NTC | LowDose_TA_NTC | HighDose_TA_NTC | |
| Accuracy | Accuracy | Accuracy | Accuracy | |
| RT | −.23 | −.34* | −.21 | −.14 |
| Baseline_TA_NTO | Placebo_TA_NTO | LowDose_TA_NTO | HighDose_TA_NTO | |
| Accuracy | Accuracy | Accuracy | Accuracy | |
| RT | −.16 | −.16 | −.11 | −.11 |
TA is target absent condition and TP represents target-present condition. NTC indicates the color non-target condition, NTO is the orientation non-target condition. Asterisks (*) indicate significant Pearson correlations (p < .05)
Overall and lag-specific means of T1 identification accuracy, T2 identification accuracy, T2|T1 accuracy and temporal integration frequency in the attentional blink task
| Baseline | Placebo | Low Dose | High Dose | |||||
|---|---|---|---|---|---|---|---|---|
| Mean | SEM | Mean | SEM | Mean | SEM | Mean | SEM | |
| Overall T1 ACC | 70.0 | 2.4 | 67.4 | 3.1 | 71.0 | 2.2 | 67.9 | 2.9 |
| T1 ACC-Lag1 | 41.4 | 3.6 | 41.0 | 4.1 | 41.3 | 3.3 | 41.2 | 3.8 |
| T1 ACC-Lag3 | 82.7 | 2.3 | 78.2 | 3.3 | 83.8 | 2.3 | 79.4 | 2.9 |
| T1 ACC-Lag8 | 86.0 | 2.0 | 83.0 | 3.0 | 87.8 | 1.9 | 83.1 | 2.7 |
| Overall T2 ACC | 65.2 | 2.6 | 62.8 | 3.5 | 66.2 | 2.6 | 63.4 | 3.2 |
| T2 ACC-Lag1 | 35.8 | 3.9 | 36.6 | 4.5 | 36.0 | 3.9 | 37.3 | 4.1 |
| T2 ACC-Lag3 | 73.2 | 2.8 | 69.2 | 3.9 | 74.3 | 3.0 | 70.1 | 3.6 |
| T2 ACC-Lag8 | 86.7 | 1.9 | 82.6 | 3.1 | 88.2 | 2.1 | 82.8 | 2.8 |
| Overall T2|T1 ACC | 76.9 | 2.5 | 75.1 | 3.3 | 79.0 | 2.5 | 78.1 | 2.5 |
| T2|T1 ACCLag1 | 58.9 | 5.1 | 61.5 | 4.8 | 63.9 | 4.5 | 64.7 | 4.4 |
| T2|T1 ACC-Lag3 | 80.1 | 2.2 | 77.0 | 3.4 | 80.9 | 2.4 | 78.7 | 2.7 |
| T2|T1 ACC-Lag8 | 91.7 | 1.2 | 86.9 | 2.8 | 92.2 | 2.7 | 90.9 | 1.4 |
| Overall integration | 6.1 | 1.0 | 5.7 | 1.0 | 6.9 | 1.1 | 6.1 | 1.0 |
| Integration-Lag1 | 16.9 | 2.6 | 15.4 | 2.6 | 18.2 | 2.8 | 16.6 | 2.6 |
| Integration-Lag3 | 1.2 | .3 | 1.3 | .4 | 1.9 | .6 | 1.2 | .4 |
| Integration-Lag8 | 0.3 | .1 | .3 | .1 | .4 | .2 | .4 | .2 |
ACC means accuracy and SEM means standard error of the mean. All means and SEM are presented in percentage values
Overall and condition-specific mean accuracies and RT in visual search task
| Baseline | Placebo | Low Dose | High Dose | |||||
|---|---|---|---|---|---|---|---|---|
| Mean | SEM | Mean | SEM | Mean | SEM | Mean | SEM | |
| Overall ACC | 95.4 | .5 | 95.5 | .5 | 95.2 | .6 | 95.9 | .4 |
| TA ACC | 96.0 | .5 | 96.1 | .5 | 95.8 | .6 | 96.7 | .5 |
| TP ACC | 94.8 | .6 | 94.9 | .6 | 94.7 | .6 | 95.2 | .5 |
| NTC ACC | 94.5 | .6 | 94.9 | .6 | 94.5 | .6 | 95.2 | .5 |
| NTO ACC | 96.3 | .5 | 96.1 | .5 | 95.9 | .5 | 96.6 | .4 |
| TA and NTC ACC | 94.8 | .7 | 95.2 | .6 | 94.7 | .7 | 95.8 | .6 |
| TA and NTO ACC | 97.3 | .4 | 97.0 | .5 | 96.9 | .5 | 97.6 | .4 |
| TP and NTC ACC | 94.2 | .7 | 94.6 | .7 | 94.3 | .6 | 94.6 | .5 |
| TP and NTO ACC | 95.4 | .6 | 95.2 | .6 | 95.0 | .7 | 95.7 | .4 |
| Overall RT | 344.5 | 6.7 | 343.6 | 6.7 | 334.9 | 5.2 | 339.8 | 6.9 |
| TA RT | 350.7 | 7.3 | 351.9 | 7.1 | 340.6 | 5.8 | 347.1 | 7.5 |
| TP RT | 338.2 | 6.6 | 335.2 | 6.8 | 329.1 | 5.2 | 332.1 | 6.7 |
| NTC RT | 352.2 | 7.2 | 351.1 | 7.1 | 342.5 | 5.5 | 347.3 | 7.3 |
| NTO RT | 336.7 | 6.3 | 336.0 | 6.4 | 327.2 | 5.0 | 331.9 | 6.5 |
| TA and NTC RT | 363.1 | 7.9 | 363.9 | 7.7 | 351.9 | 6.1 | 357.3 | 7.9 |
| TA and NTO RT | 338.3 | 6.9 | 339.9 | 6.6 | 329.3 | 5.7 | 336.8 | 7.2 |
| TP and NTC RT | 341.3 | 6.9 | 338.4 | 6.9 | 333.2 | 5.3 | 337.3 | 7.0 |
| TP and NTO RT | 335.2 | 6.3 | 332.1 | 6.7 | 325.1 | 5.1 | 326.8 | 6.3 |
ACC indicates accuracy, TA is target absent condition, and TP represents target-present condition. NTC indicates the color non-target condition, NTO is the orientation non-target condition. SEM means standard error of the mean. Accuracies are reported as percentage values, and RTs are given in milliseconds