Literature DB >> 29380010

Increases in tibial force imbalance but not changes in tibiofemoral laxities are caused by varus-valgus malalignment of the femoral component in kinematically aligned TKA.

Jeremy Riley1, Joshua D Roth1, Stephen M Howell2, Maury L Hull3,4,5.   

Abstract

PURPOSE: The purposes of this study were to quantify the increase in tibial force imbalance (i.e. magnitude of difference between medial and lateral tibial forces) and changes in laxities caused by 2° and 4° of varus-valgus (V-V) malalignment of the femoral component in kinematically aligned total knee arthroplasty (TKA) and use the results to detemine sensitivities to errors in making the distal femoral resections. Because V-V malalignment would introduce the greatest changes in the alignment of the articular surfaces at 0° flexion, the hypotheses were that the greatest increases in tibial force imbalance would occur at 0° flexion, that primarily V-V laxity would significantly change at this flexion angle, and that the tibial force imbalance would increase and laxities would change in proportion to the degree of V-V malalignment.
METHODS: Kinematically aligned TKA was performed on ten human cadaveric knee specimens using disposable manual instruments without soft tissue release. One 3D-printed reference femoral component, with unmodified geometry, was aligned to restore the native distal and posterior femoral joint lines. Four 3D-printed femoral components, with modified geometry, introduced V-V malalignments of 2° and 4° from the reference component. Medial and lateral tibial forces were measured during passive knee flexion-extension between 0° to 120° using a custom tibial force sensor. Eight laxities were measured from 0° to 120° flexion using a six degree-of-freedom load application system.
RESULTS: With the tibial component kinematically aligned, the increase in the tibial force imbalance from that of the reference component at 0° of flexion was sensitive to the degree of V-V malalignment of the femoral component. Sensitivities were 54 N/deg (medial tibial force increasing > lateral tibial force) (p < 0.0024) and 44 N/deg (lateral tibial force increasing > medial tibial force) (p < 0.0077) for varus and valgus malalignments, respectively. Varus-valgus malalignment did not significantly change varus, internal-external rotation, anterior-posterior, and compression-distraction laxities from 0° to 120° flexion. At only 30° of flexion, 4° of varus malalignment increased valgus laxity 1° (p = 0.0014).
CONCLUSION: At 0° flexion, V-V malalignment of the femoral component caused the tibial force imbalance to increase significantly, whereas the laxities were relatively unaffected. Because tibial force imbalance has the potential to adversely affect patient-reported outcomes and satisfaction, surgeons should strive to limit errors in resecting the distal femoral condyles to within ± 0.5 mm which in turn limits the average increase in tibial force imbalance to 68 N. Because laxities were generally unaffected, instability resulting from large increases in laxity is not a clinical concern within the ± 4° range tested. LEVEL OF EVIDENCE: Therapeutic, Level II.

Entities:  

Keywords:  Alignment; Anterior–posterior; Compression–distraction; Contact force; Internal–external; Kinematic alignment; Knee replacement; Varus–valgus

Mesh:

Year:  2018        PMID: 29380010     DOI: 10.1007/s00167-018-4841-6

Source DB:  PubMed          Journal:  Knee Surg Sports Traumatol Arthrosc        ISSN: 0942-2056            Impact factor:   4.342


  61 in total

1.  A new surgical technique for medial collateral ligament balancing: multiple needle puncturing.

Authors:  Johan Bellemans; Hilde Vandenneucker; Johan Van Lauwe; Jan Victor
Journal:  J Arthroplasty       Date:  2010-05-10       Impact factor: 4.757

2.  The Influence of Component Alignment and Ligament Properties on Tibiofemoral Contact Forces in Total Knee Replacement.

Authors:  Colin R Smith; Michael F Vignos; Rachel L Lenhart; Jarred Kaiser; Darryl G Thelen
Journal:  J Biomech Eng       Date:  2016-02       Impact factor: 2.097

Review 3.  Clinical biomechanics of instability related to total knee arthroplasty.

Authors:  Kiron K Athwal; Nicola C Hunt; Andrew J Davies; David J Deehan; Andrew A Amis
Journal:  Clin Biomech (Bristol, Avon)       Date:  2013-11-13       Impact factor: 2.063

4.  Can we define envelope of laxity during navigated knee arthroplasty?

Authors:  K M Ghosh; A P Blain; L Longstaff; S Rushton; A A Amis; D J Deehan
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2013-07-06       Impact factor: 4.342

5.  Why are total knee arthroplasties being revised?

Authors:  David F Dalury; Donald L Pomeroy; Robert S Gorab; Mary Jo Adams
Journal:  J Arthroplasty       Date:  2013-07-23       Impact factor: 4.757

6.  The effect of femoral component rotation on the extensor retinaculum of the knee.

Authors:  Kanishka M Ghosh; Azhar M Merican; Farhad Iranpour; David J Deehan; Andrew A Amis
Journal:  J Orthop Res       Date:  2010-09       Impact factor: 3.494

7.  The effects of axial rotational alignment of the femoral component on knee stability and patellar tracking in total knee arthroplasty demonstrated on autopsy specimens.

Authors:  Y S Anouchi; L A Whiteside; A D Kaiser; M T Milliano
Journal:  Clin Orthop Relat Res       Date:  1993-02       Impact factor: 4.176

8.  A joint coordinate system for the clinical description of three-dimensional motions: application to the knee.

Authors:  E S Grood; W J Suntay
Journal:  J Biomech Eng       Date:  1983-05       Impact factor: 2.097

9.  The effect of malalignment on stresses in polyethylene component of total knee prostheses--a finite element analysis.

Authors:  Jiann Jong Liau; Cheng Kung Cheng; Chun Hsiung Huang; Wai Hee Lo
Journal:  Clin Biomech (Bristol, Avon)       Date:  2002-02       Impact factor: 2.063

10.  The influence of muscle load on tibiofemoral knee kinematics.

Authors:  Jan Victor; Luc Labey; Pius Wong; Bernardo Innocenti; Johan Bellemans
Journal:  J Orthop Res       Date:  2010-04       Impact factor: 3.494

View more
  5 in total

1.  Alignment in TKA: what has been clear is not anymore!

Authors:  Michael T Hirschmann; Roland Becker; Reha Tandogan; Pascal-André Vendittoli; Stephen Howell
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2019-06-12       Impact factor: 4.342

2.  Relationship between surgical balancing and outcome measures in total knees.

Authors:  Lauren M Chu; Patrick A Meere; Cheongeun Oh; Peter S Walker
Journal:  Arthroplast Today       Date:  2019-03-02

3.  Measured Resection Techniques Do Not Align to the Cylindrical Axis in Kinematic Total Knee Arthroplasty.

Authors:  David Drynan; Rabi Faisal Rasouli; James W A Williams; Buddhika Balalla
Journal:  Arthroplast Today       Date:  2021-03-23

4.  Excellent and Good Results Treating Stiffness with Early and Late Manipulation after Unrestricted Caliper-Verified Kinematically Aligned TKA.

Authors:  Adithya Shekhar; Stephen M Howell; Alexander J Nedopil; Maury L Hull
Journal:  J Pers Med       Date:  2022-02-18

5.  A Surgeon That Switched to Unrestricted Kinematic Alignment with Manual Instruments Has a Short Learning Curve and Comparable Resection Accuracy and Outcomes to Those of an Experienced Surgeon.

Authors:  Alexander J Nedopil; Anand Dhaliwal; Stephen M Howell; Maury L Hull
Journal:  J Pers Med       Date:  2022-07-16
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.