Facile Chemical Access to Biologically Active Norcantharidin Derivatives from Biomass.

Reductive amination of 2,5-diformylfuran (DFF) was used to implement the transition from bio-derived 5-hydroxymethylfurfural (HMF) to pharmaceuticals. The synthesized bis(aminomethyl)furans were utilized as building blocks for the construction of new derivatives with structural cores of naturally occurring biologically active compounds. Using the one-pot procedure, which included the Diels-Alder reaction followed by hydrogenation of the double bond, bio-derived analogues of the anticancer drug norcantharidin were obtained. The cyclization process was diastereoselective, and resulted in the formation of tricyclic products with the endo configuration. Analysis of cytotoxycity for the resulting tricyclic amine-containing compounds showed an increase of anticancer activity as compared with the unsubstituted norcantharimide.

1. Introduction

Plant biomass is the largest renewable source of carbohydrates, with a mass of about 1011 tons of n class="Chemical">carbon per year [1]. To date, the most promising approach to the synthetic utilization of biomass involves the catalytic conversion of carbohydrates to molecular building blocks, which are often defined as platform chemicals [2,3]. 5-Hydroxymethylfurfural (HMF) is one of the most important platform chemicals, as it has many possibilities, especially in the fields of biofuels [4,5,6,7,8], biomaterials production [9,10,11,12], and fine chemical applications [13,14,15]. In contrast to several other classes of organic compounds, obtaining substituted amines from HMF is quite rare [13,14,15]. The most important applications are in the fields of medicine and material science. Indeed, the amine functional group is represented in many bioactive compounds, so the functionalization by an amine-containing fragment can improve the pharmacological properties of potential drugs. In addition, primary and secondary HMF-based amines can be used as monomers in the synthesis of bio-derived polyamides [9,16,17,18,19].

The synthesis of 2,5-bis(aminomethyl)furan (n class="Chemical">BAMF), a useful diamine compound, from HMF is well known [16,20,21], but examples of the synthesis of N-substituted BAMF derivatives are rarely presented in the literature [22,23]. Possible ways to obtaining such derivatives are the alkylation of BAMF or the alkylation of primary amines by halogenated derivatives of HMF, especially by 5-(chloromethyl)furfural. Such transformations are not practical, since it is impossible to control the degree of alkylation and the formation of quaternary byproducts. Overall, these limitations lead to non-selective transformations (Scheme 1).

Scheme 1

2,5-Bis(aminomethyl)furan (BAMF) synthesis from 5-hydroxymethylfurfural (HMF) and route to N-substituted BAMF derivatives.

In the present work, we report the reductive amination of 2,5-diformylfuran (n class="Chemical">DFF) to connect biomass with pharmaceuticals containing an amino function (Scheme 1). For this purpose, we synthesized di- and tri-substituted BAMF derivatives as building blocks for further synthetic applications. The Diels–Alder protocol was used in order to obtain bio-derived analogues of the anticancer drug norcantharidin. Additionally, disubstituted amines were of considerable interest as monomers for the production of new biomaterials [19].

2. Results and Discussion

2.1. Synthesis of Norcantharidin Derivatives from HMF

HMF was obtained from natural carbohydrates (cellulose or fructose), and was isolated in a pure crystalline form, as described previously (Scheme 2) [24,25]. DFF was synthesized by oxidation of HMF using a recyclable catalyst [Pip’(O)][BF4] (4-acetamido-2,2,6,6-tetramethyl-1-oxopiperidinium tetrafluoroborate) in ionic liquid media, according to the previously developed method [26]. In order to obtain amine-based building blocks, the reductive amination of DFF with mono- and disubstituted amines was implemented (Scheme 2). The reaction of DFF with two equivalents of amines, followed by the treatment with sodium triacetoxyborohydride resulted in amines 3–8, which were obtained with high yields and very good purity of >95%.

Scheme 2

Reductive amination of 2,5-diformylfuran (DFF) for the synthesis of bio-based norcantharimides. (i) CrCl3·6H2O, [BMIM]Cl, 120 °C (H2SO4, [BMIM]Cl, 65 °C); (ii) [Pip’(O)][BF4], [BMIM]Cl; (iii) NaBH(OAc)3, CHCl3; (iv) maleimide, THF; (v) H2, 1 atm, 10% Pd/C, THF. *—yield using step-by-step procedure.

The prepared 2,5-bis(aminomethyl)furan derivatives can be further modified at the n class="Chemical">amine or furan functional groups. The modification of substituents on the furan ring in HMF-based compounds has been well studied [13,14,15], whereas the chemistry of the furan ring is a challenging problem. For evaluation of the synthetic potential of the furan ring in the prepared amines, we synthesized norcantharimides 9–12, which were bio-derived analogues of the anticancer drug norcantharidin. We used a modified one-pot protocol based on the Diels–Alder reaction of compounds 6–8 with alkenes, followed by hydrogenation of the formed double bond, as reported recently [27]. The Diels–Alder reactions were performed in THF media at room temperature and monitored by NMR. The second stage was performed by hydrogen addition over 10% Pd/C. Final products were isolated by column chromatography on silica with moderate yields and high purity.

Evaluation of the molecular structure of the formed tricyclic products was carried out using standard 1D-, 2D-NMR, and NOE experiments along with LC-MS data. In comparison with the previous results, the endo selectivity of the Diels–Alder reaction was observed for most of the isolated products. Introduction of the N-propyl moiety into maleimide led to the loss of diastereoselectivity of the cycloaddition, possibly due to the steric effects of the N-alkyl substituent, and the formation of the mixture of 10-endo and 10-exo products with a diastereomeric ratio of 4:1, respectively. Both diastereomers were isolated by column chromatography and characterized spectroscopically. The diastereomeric configuration was determined by 1H-NMR and NOE experiments. After considering the NMR data confirmed by the X-ray analysis of HMF-derived norcantharimide analogues obtained in the previous study [27], the spatial structure of the Diels–Alder adducts was confirmed (see the Supplementary Materials). Chemical shifts of the diastereomeric protons at the articulated position were characterized by a singlet at ~3.5–3.7 ppm in the 1H-NMR spectra, while the signals of the appropriate protons in the exo products (compounds norcantharimide [28] and 10-exo) were observed in the stronger magnetic fields at ~2.9–3.1 ppm. Additional confirmation of the stereo configuration of compounds 10-exo and 10-endo was accomplished by nuclear Overhauser effect spectroscopy (NOESY) and analysis of the obtained spectral data (see the Supplementary Materials).

Norcantharidins and n class="Chemical">norcantharimides are synthetic analogues of the natural product cantharidin, which possesses anticancer activity and is of considerable practical interest [29,30,31,32,33,34]. For comparison of the cytotoxic activity of the prepared amine-containing tricyclic products, we prepared a number of their oxo analogues by the reaction of 2,5-(alkoxymethyl)furans 14–16 with maleic anhydride, followed by the hydrogenation reaction (Scheme 3). The initial furans were prepared by alkylation or acylation of BHMF using known methods (see the Section 3). The preparation of final products 17–19 was performed under the reaction conditions used for the synthesis of the furan–maleimide adducts, and endo selectivity of the cyclization reaction was observed.

Scheme 3

Preparation of norcantharidin analogues. (i) CrCl3·6H2O, [BMIM]Cl, 120 °C (H2SO4, [BMIM]Cl, 65 °C); (ii) NaBH4, water; (iii) alkylation or acylation; (iv) maleic anhydride, THF; (v) H2, 1 atm, 10% Pd/C, THF. *—yield using step-by-step procedure.

The one-pot protocol for the synthesis of the tricyclic products was used because we were unable to isolate the intermediates of the Diels–Alder reaction due to their high polarity and the reversibility of the cycloaddition process. However, two unsaturated products were obtained using Et2O instead of n class="Chemical">THF, and were precipitated from the reaction mixture in pure form. The hydrogenation of these products in THF media under standard reaction conditions led to the formation of products 9 and 19, with an overall yield that was higher than that when using the one-pot procedure (Scheme 3).

2.2. Biological Activity of Synthesized Compounds

Preliminary testing of the biological activity of selected substances was carried out (Figure 1). According to a cytotoxicity assay in n class="Species">human colorectal adenocarcinoma cell line HT-29, the activity of norcantharidin was in accordance with the published data [35]. Despite a recently reported improvement of anticancer activity of norcantharidin by introduction of O-benzoylated hydroxymethyl groups [29], isomeric product 19 and methylated analogue 17 did not show high cytotoxicity towards HT-29 cells. The cytotoxic activity of norcantharimide and its derivatives was low [36], but we found for the first time that it could be improved by introduction of the phenylaminomethyl moiety into the bicyclic core. The activity of aminomethylated norcantharimide 9 towards HT-29 cells was significantly higher than that of norcantharimide (see Figure 1 and the Supplementary Materials for details), but lower than the norcantharidin activity, indicating the necessity of further structural tuning to improve the biological activity.

Figure 1

Increasing biological activity of cantharimide by introduction of an amino function (IC50 in HT-29 cells is given in µM).

3. Materials and Methods

Commercially available reagents and solvents were of analytical grade or were purified prior to use by standard methods. NMR spectra were recorded using a Bruker Fourier 300 n class="Disease">HD, Bruker Avance III 400 and Bruker DRX-500 spectrometers (Fällanden, Switzerland) at the following frequencies: 300.1/400.1/500.1 MHz (1H), 75.5/100.6/125.8 MHz (13C). NMR chemical shifts were measured relative to residual protio solvent peaks. Mass spectrometric detection was performed on a high resolution Bruker maXis instrument equipped with an electrospray ionization (ESI) ion source. Chromatographic separations were performed on silica gel (Kieselgel, 230–400 mesh, Merck Schuchardt, Darmstadt, Germany) with analytical grade solvents. Analytical TLC was performed on Merck silica gel plates with a QF-254 indicator. Visualization was accomplished with UV light or using KMnO4 in aqueous NaOH or (NH4)6Mo7O24 in ethanolic H2SO4, and the TLC was heated until the development of color. Norcantharidin and norcantharimide were obtained from commercial sources.

3.1. Synthesis of Substrates

5-Hydroxymethylfurfural (n class="Chemical">HMF, 1) was prepared from cellulose or fructose with 50% (45% after recrystallization) or 95% (90% after recrystallization) yields, respectively [24].

2,5-Diformylfuran (n class="Gene">DFF, 2) was prepared from 1 with 95% yield [26].

2,5-Bis(hydroxymethyl)furan (n class="Chemical">BHMF, 13) was prepared from 1 with 99% yield [37].

2,5-Bis(methoxymethyl)furan (14) was prepared from 13 with 74% yield [38].

2,5-Bis(ethoxymethyl)furan (15) was prepared from 13 with 76% yield [27].

Furan-2,5-diylbis(methylene)dibenzoate (16) was prepared from 13 with 95% yield [39]. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 8.06 (d, J = 7.8 Hz, 4H), 7.55 (t, J = 7.1 Hz, 2H), 7.42 (t, J = 7.5 Hz, 4H), 6.49 (s, 2H), 5.31 (s, 4H). 13C-NMR (126 MHz, CDCl3) δ 166.3, 150.4, 133.2, 129.9, 128.5, 111.9, 58.6. HRMS (ESI) Calcd. for C20H16O5 [M + Na]: 359.0890. Found 359.0875.

3.2. General Method for Synthesis of 2,5-Bis(aminomethyl)furans

A solution of 2,5-diformylfuran 2 (0.5 g, 4 mmol) and the corresponding amine (8.4 mmol) in chloroform (15 mL) was stirred for 20 min, and sodium triacetoxyborohydride (3.4 g, 16 mmol) was added portion-wise. The reaction mixture was stirred overnight, poured into a saturated solution of sodium bicarbonate, and extracted with chloroform (3 × 7 mL). The combined organic phases were washed with water, dried with sodium sulfate, evaporated, and dried under high vacuum. Target compounds 3–8 were obtained as pale yellow oils.

2,5-Bis(N-butylaminomethyl)furan (3). Yield 0.89 g, 93%. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 6.05 (s, 2H), 3.71 (s, 4H), 2.58 (t, J = 7.2 Hz, 4H), 1.45 (dt, J = 14.7, 7.3 Hz, 4H), 1.30 (m, 4H), 0.88 (t, J = 7.3 Hz, 6H). 13C-NMR (126 MHz, CDCl3) δ = 153.4, 107.4, 49.0, 46.5, 32.2, 20.5, 14.1. HRMS (ESI) Calcd. for C14H26N2O [M + H]: 239.2118. Found 239.2129.

2,5-Bis(N-benzylaminomethyl)furan (4). Yield 0.99 g, 80%. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 7.34 (d, J = 4.4 Hz, 8H), 7.27 (dt, J = 6.8, 4.4 Hz, 2H), 6.13 (s, 2H), 3.80 (d, J = 13.5 Hz, 8H), 1.73 (s, 2H). 13C-NMR (126 MHz, CDCl3) δ = 153.2, 140.0, 128.5, 128.3, 127.1, 107.7, 52.9, 45.6. HRMS (ESI) Calcd. for C20H22N2O [M + H]: 307.1805. Found 307.1815.

2,5-Bis(N-cyclohexylaminomethyl)furan (5). Yield 1.10 g, 95%. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 6.04 (s, 2H), 3.75 (s, 4H), 2.42 (m, 2H), 1.85 (d, J = 10.6 Hz, 4H), 1.71 (d, J = 12.9 Hz, 4H), 1.59 (d, J = 12.0 Hz, 2H), 1.40 (br. s, 2H), 1.30–1.00 (m, 10H). 13C-NMR (126 MHz, CDCl3) δ = 153.6, 107.2, 55.9, 43.6, 33.5, 26.3, 25.1. HRMS (ESI) Calcd. for C18H30N2O [M + H]: 291.2431. Found 291.2442.

2,5-Bis(N-phenylaminomethyl)furan (6). Yield 1.02 g, 92%. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 7.20 (t, J = 7.9 Hz, 4H), 6.76 (t, J = 7.3 Hz, 2H), 6.69 (d, J = 7.7 Hz, 4H), 6.17 (s, 2H), 4.29 (s, 4H). 13C-NMR (126 MHz, CDCl3) δ = 152.1, 147.5, 129.4, 118.4, 113.5, 108.1, 41.8. HRMS (ESI) Calcd. for C18H18N2O [M + Na]: 301.1311. Found 301.1322.

2,5-Bis(N,N-diethylaminomethyl)furan (7). Yield 760 mg, 80% [27]. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 6.10 (s, 2H), 3.67 (s, 4H), 2.52 (q, 8H, J = 7.2 Hz), 1.08 (t, 12H, J = 7.2 Hz). 13C-NMR (126 MHz, CDCl3) δ = 151.4, 109.1, 48.6, 46.9, 12.0. HRMS (ESI) Calcd. for C14H26N2O [M + H]: 239.2118. Found 239.2118.

2,5-Bis(morpholinomethyl)furan (8). Yield 1.04 g, 98% [27]. n class="Chemical">1H-NMR (500 MHz, CDCl3) δ = 6.13 (s, 2H), 3.70 (m, 8H), 3.51 (s, 4H), 2.45 (m, 8H). 13C-NMR (126 MHz, CDCl3) δ = 150.9, 109.7, 66.8, 55.3, 53.2. HRMS (ESI) Calcd. for C14H22N2O3 [M + H]: 267.1703. Found 267.1703.

3.3. General Method for One-Pot Synthesis of Norcantharimide Derivatives

To a solution of 2,5-bis(aminomethyl)furans 6–8 (0.6 mmol) in 2 mL of n class="Chemical">THF, maleimide (0.12 g, 1.2 mmol, 2 eq.) was added. The reaction mixture was stirred for 24 h at 24 °C. Approximately 20 mg of 10% Pd/C was added, and the reaction mixture was placed under a hydrogen atmosphere (1 atm) for 8 h at 24 °C. The catalyst was filtered off and washed thoroughly with hot THF (3 × 4 mL). The filtrate was evaporated under reduced pressure. The residue was purified by flash chromatography (ethyl acetate as eluent). Target compounds 10–12 were obtained as pale-yellow oils. Diastereomeric products 10-endo and 10-exo were formed in a ratio of 4:1 and separated using column chromatography.

endo-4,7-Bis((phenylamino)methyl)-2-propylhexahydro-1H-4,7-epoxyisoindole-1,3(2H)-dione(n class="Chemical">endo-4,7-bis-(phenylamino)-2-propyl-norcantharimide) (10-endo). Yield 133 mg, 53%. 1H-NMR (500 MHz, CDCl3) δ = 7.22 (t, J = 7.8 Hz, 8H), 6.77 (t, J = 7.4 Hz, 12H), 4.37 (br. s, 2H), 3.70 (d, J = 13.3 Hz, 2H), 3.59 (d, J = 13.3 Hz, 2H), 3.53–3.41 (m, 4H), 1.89 (d, J = 7.6 Hz, 2H), 1.76 (d, J = 7.7 Hz, 2H), 1.63 (m, 1H), 0.97 (t, J = 7.4 Hz, 1H). 13C-NMR (126 MHz, CDCl3) δ = 176.2, 148.0, 129.4, 118.1, 113.2, 88.6, 53.4, 47.3, 40.7, 30.0, 21.1, 11.5. HRMS (ESI) Calcd. for C25H29N3O3 [M + Na]: 442.2101. Found 442.2114.

exo-4,7-Bis((phenylamino)methyl)-2-propylhexahydro-1H-4,7-epoxyisoindole-1,3(2H)-dione(exo-4,7-bis(phe-nylamino)-2-propyl-norcantharimide) (10-exo). Yield 33 mg, 13%. 1H-NMR (400 MHz, CDCl3) δ = 7.19 (t, J = 7.9 Hz, 4H), 6.72 (dd, J = 12.5, 7.6 Hz, 6H), 4.21 (s, 2H), 3.69 (q, J = 14.0 Hz, 4H), 3.49 (t, J = 7.1 Hz, 2H), 3.10 (s, 2H), 2.06 (d, J = 7.2 Hz, 2H), 1.76 (d, J = 7.2 Hz, 2H), 1.61 (m, 2H), 0.88 (t, J = 7.4 Hz, 3H). 13C-NMR (126 MHz, CDCl3) δ = 176.1, 148.2, 129.4, 117.9, 113.4, 88.2, 52.1, 45.4, 40.7, 34.2, 21.1, 11.3. HRMS (ESI) Calcd. for C25H29N3O3 [M + Na]: 442.2101. Found 442.2111.

endo-4,7-Bis((diethylamino)methyl)hexahydro-1H-4,7-epoxyisoindole-1,3(n class="Chemical">2H)-dione(endo-4,7-bis(diethyla-mino)norcantharimide) (11). Yield 103 mg, 51% [27]. 1H-NMR (500 MHz, CD3OD) δ = 3.66 (s, 2H), 2.99 (m, 4H), 2.76–2.89 (m, 8H), 1.76–1.85 (m, 4H), 1.12 (t, 12H, J = 7.1 Hz). 13C-NMR (126 MHz, CD3OD) δ = 177.8, 88.6, 54.5, 53.6, 48.4, 29.1, 10.3.

endo-4,7-Bis(morpholinomethyl)hexahydro-1H-4,7-epoxyisoindole-1,3(2H)-dione(n class="Chemical">endo-4,7-bis(morpholino-methyl)norcantharimide) (12). Yield 93 mg, 42% [27]. 1H-NMR (500 MHz, CD3OD) δ = 3.58–3.65 (m, 10H), 2.72 (m, 4H), 2.48–2.66 (m, 8H), 1.69–1.83 (m, 4H). 13C-NMR (126 MHz, CD3OD) δ = 178.2, 89.1, 66.7, 59.8, 54.6, 53.7, 28.9.

3.4. General Method for One-Pot Synthesis of Norcantharidin Derivatives

To a solution of compounds 14–16 (1 mmol) in 2 mL of THF, n class="Chemical">maleic anhydride (196 mg, 2 mmol, 2 eq.) was added, and the reaction mixture was stirred for 24 h at 24 °C. Approximately 30 mg of 10% Pd/C was added, and the reaction mixture was placed under a hydrogen atmosphere (1 atm) for 12 h at 24 °C. The catalyst was filtered off and washed thoroughly with hot THF (3 × 4 mL). The filtrate was evaporated under reduced pressure, and the resulting mixture was treated by column chromatography. Target compounds 17–19 were obtained as white solids or light yellow oils.

endo-4,7-Bis(methoxymethyl)hexahydro-4,7-epoxyisobenzofuran-1,3-dione(endo-4,7-bis(methoxymethyl)-n class="Chemical">norcantharidin) (17). Yield 43 mg, 17% (33% based on reacted substrate). 1H-NMR (500 MHz, CDCl3) δ = 3.86 (d, J = 10.6 Hz, 2H), 3.76 (d, J = 10.6 Hz, 2H), 3.42 (s, 6H), 3.31 (s, 2H), 2.06 (d, J = 7.4 Hz, 2H), 1.71 (d, J = 7.5 Hz, 2H). 13C-NMR (126 MHz, CDCl3) δ = 169.3, 88.1, 70.8, 59.7, 52.5, 32.0. HRMS (ESI) Calcd. for C12H16O6 [M + Na]: 279.0839. Found 279.0836.

endo-4,7-Bis(ethoxymethyl)hexahydro-4,7-epoxyisobenzofuran-1,3-dione(endo-4,7-bis(ethoxymethyl)nor-n class="Chemical">cantharidin) (18). Yield 77 mg, 27% (59% based on reacted substrate). 1H-NMR (500 MHz, CDCl3) δ = 3.92 (d, J = 10.6 Hz, 2H), 3.81 (d, J = 10.6 Hz, 2H), 3.61 (m, 4H), 3.31 (s, 2H), 2.08 (q, J = 3.5 Hz, 2H), 1.73 (q, J = 3.4 Hz, 2H), 1.22 (t, J = 7.0 Hz, 6H). 13C-NMR (126 MHz, CDCl3) δ = 169.4, 88.3, 68.8, 67.5, 52.6, 32.2, 15.1. HRMS (ESI) Calcd. for C14H20O6 [M + H]: 307.1152. Found 307.1148.

endo-1,3-Dioxohexahydro-4,7-epoxyisobenzon class="Chemical">furan-4,7-diyl)bis(methylene)dibenzoate(endo-4,7-bis((O-ben-zoyl)-oxymethyl)-norcantharidin) (19). Yield 112 mg, 26% (70% based on reacted substrate). 1H-NMR (500 MHz, DMSO-d6) δ = 7.97 (d, J = 7.4 Hz, 4H), 7.68 (t, J = 7.4 Hz, 2H), 7.54 (t, J = 7.6 Hz, 4H), 4.72 (m, 4H), 3.80 (s, 2H), 2.01 (s, 4H). 13C-NMR (126 MHz, DMSO-d6) δ = 170.6, 165.1, 133.6, 129.3, 128.8, 86.6, 62.4, 52.9, 31.2. HRMS (ESI) Calcd. for C24H20O8 [M + H]: 459.1050. Found 459.1040.

3.5. Synthesis of Compounds and Using Step-by-Step Procedure

3.5.1. Preparation of Compound 9

To a solution of compound 6 (100 mg, 0.36 mmol) in 0.2 mL of Et2O, n class="Chemical">maleimide (105 mg, 1.1 mmol, 3 eq.) was added, and the reaction mixture was stirred for 24 h at 24 °C. The precipitate that formed was filtered, washed with cold Et2O, and dried in vacuo. Compound 9a was obtained as white crystals (49 mg, 36%). Approximately 10 mg of 10% Pd/C was added to a solution of compound 9a (49 mg, 0.13 mmol) in THF (1 mL), and the reaction mixture was placed under a hydrogen atmosphere (1 atm) for 8 h at 24 °C. The catalyst was filtered off and washed thoroughly with hot THF (3 × 4 mL). The filtrate was evaporated under reduced pressure. The residue was purified by flash chromatography (ethyl acetate as eluent). Compound 9 was obtained as a pale yellow oil (47 mg, 35% over two steps).

endo-4,7-Bis((phenylamino)methyl)-3a,4,7,7a-tetrahydro-1H-4,7-epoxyisoindole-1,3(2H)-dione (9a). n class="Chemical">1H·NMR (500 MHz, Acetone-d6) δ = 9.80 (s, 1H), 7.14 (t, J = 7.8 Hz, 4H), 6.78 (d, J = 7.9 Hz, 4H), 6.64 (t, J = 7.3 Hz, 2H), 6.52 (s, 2H), 5.00 (s, 2H), 3.80 (qd, J = 13.7, 6.0 Hz, 4H), 3.67 (s, 2H). 13C-NMR (126 MHz, Acetone-d6) δ 176.8, 149.8, 137.5, 129.9, 117.9, 113.7, 92.1, 52.2, 45.8. HRMS (ESI) Calcd. for C22H11N3O3 [M + H]: 376.1656. Found 376.1648.

endo-4,7-Bis((phenylamino)methyl)hexahydro-1H-4,7-epoxyisoindole-1,3(2H)-dione(n class="Chemical">endo-4,7-bis(phenylami-no)norcantharimide) (9). 1H-NMR (500 MHz, CDCl3) δ = 8.26 (s, 1H), 7.21 (t, J = 7.6 Hz, 4H), 6.75 (t, J = 8.9 Hz, 6H), 4.19 (s, 2H), 3.68 (d, J = 13.6 Hz, 2H), 3.58 (d, J = 10.3 Hz, 4H), 1.93 (s, 4H). 13C-NMR (126 MHz, CDCl3) δ = 176.1, 148.1, 129.5, 118.2, 113.2, 88.9, 54.6, 47.1, 30.1. HRMS (ESI) Calcd. for C22H23N3O3 [M + H]: 378.1812. Found 378.1818.

3.5.2. Preparation of Compound 19

To a solution of compound 16 (100 mg, 0.3 mmol) in 2 mL of Et2O, n class="Chemical">maleic anhydride (87 mg, 0.9 mmol, 3 eq.) was added, and the reaction mixture was stirred for 24 h at 24 °C. The precipitate that formed was filtered, washed with cold Et2O, and dried in vacuo. Compound 19a was obtained as white crystals (110 mg, 84%). Approximately 10 mg of 10% Pd/C was added to a solution of compound 19a (110 mg, 0.25 mmol) in THF (1 mL), and the reaction mixture was placed under a hydrogen atmosphere (1 atm) for 8 h at 24 °C. The catalyst was filtered off and washed thoroughly with hot THF (3 × 4 mL). The filtrate was evaporated under reduced pressure. The residue was purified by flash chromatography (ethyl acetate as eluent). Compound 19 was obtained as a pale yellow oil (100 mg, 77% over two steps).

endo-1,3-Dioxo-1,3,3a,7a-tetrahydro-4,7-epoxyisobenzon class="Chemical">furan-4,7-diylbis(methylene)dibenzoate (19a). 1H-NMR (500 MHz, Acetone-d6) δ = 8.02 (d, J = 7.6 Hz, 4H), 7.65 (t, J = 7.3 Hz, 2H), 7.50 (t, J = 7.6 Hz, 4H), 6.84 (s, 2H), 5.13 (d, J = 12.6 Hz, 2H), 4.85 (d, J = 12.6 Hz, 2H), 3.90 (s, 2H). 13C-NMR (75 MHz, Acetone-d6) δ 169.8, 166.2, 139.2, 134.2, 130.7, 130.4, 129.5, 91.4, 62.3, 53.8. HRMS (ESI) Calcd. for C24H18O8 [M + NH4]: 452.1340. Found 452.1342.

3.6. Preliminary Studies of Cytotoxicity of Selected Substances

3.6.1. Cell Culture

The human n class="Disease">colorectal adenocarcinoma cell line HT-29 (The Russian Cell Culture Collection (RCCC), the Institute of Cytology RAS, St. Petersburg, Russia) was cultured in clear plastic tissue culture-treated dishes or multiple-well plates (Corning Inc., Corning, NY, USA) in a HeraCell 150 incubator (Thermo Electron Corp., Waltham, MA, USA) at 37 °C, 95% humidity, and 5% CO2. The DMEM (Dulbecco’s modified Eagle’s medium)/F-12 (1:1) medium with 2.5 mM L-glutamine and 1.5 mM HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) (HyClone, Logan, UT, USA) was used. The medium was supplemented with 10% fetal bovine serum (HyClone, Logan, UT, USA), 100 units·mL−1 penicillin (OAO Sintez, Kurgan, Russia), and 100 μg*mL−1 streptomycin (OAO Biokhimik, Saransk, Russia).

3.6.2. MTS Assay

The MTS assay was used to evaluate the cytotoxicity of the target compounds, as previously described [40]. Before the test, cells were placed into 96-well flat-bottomed plates, with 10,000 cells per well. The utmost wells were filled with 200 μL of n class="Chemical">phosphate-buffered saline (HyClone, Logan, UT, USA). Cells were cultivated until reaching a 70% monolayer, and then were incubated for 48 h or 72 h with the target compounds in concentrations ranging from 1 μM to 5000 μM, depending on the compound, with 10 points in total. The same substance concentrations were applied to an empty plate to allow an adjustment for the substance influence on optical density. All of the test points were measured in triplicate. Triton-100 (1%, Sigma-Aldrich, St. Louis, MO, USA) in the culture medium was used as a positive control, and the medium was used as a negative control. After incubation, 20 μL of the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) reagent (CellTiter 96® AQueous One Solution Cell Proliferation Assay, Promega, Fitchburg, WI, USA) were added into each well, and the plates were incubated for additional 4 h. Optical density was measured at 492 nm and 650 nm using an Original Multiskan EX (Lab Systems, Midland, ON, Canada), and the values obtained at 650 nm were subtracted from those obtained at 492 nm to exclude background absorption.

4. Conclusions

In summary, we have developed the reductive amination of DFF in order to obtain new n class="Chemical">amine-containing bio-derived building blocks 3–6 and norcantharidin derivatives 9, 10, and 17–19, which can be used in the production of drugs and materials. The prepared derivatives extend applications of HMF as a platform chemical in organic synthesis, particularly connecting biomass processing with amine-containing building blocks. An efficient one-pot procedure was implemented, and the Diels–Alder reaction of substituted BAMF derivatives with maleimide and maleic anhydride was carried out with high endo selectivity; the influence of substituents in maleimide on diastereoselectivity of the cycloaddition was observed. It was shown that the introduction of amines in the side-chains resulted in the enhanced bioactivity of cantharimide.