Evaluation of the potential of pelletized biomass from different municipal solid wastes for use as solid fuel.

Four different municipal solid wastes (dog manure, horse manure, apple pomace waste and tea waste) and an industrial by-product (NovoGro) were used to produce solid fuel pellets. The mixtures followed a raw material to NovoGro ratio of 50:1. The pellets diameters varied between 4 and 5 mm, and the average length was 20 mm. The dog manure, horse manure, apple pomace waste and tea waste pellets were denoted as DN, HN, AN and TN, respectively. The combustion characteristics of the pelletized fuels were investigated, such as total moisture, ash content, calorific value and ash fusion point, etc. The physicochemical properties were analyzed by using a number of analytical techniques including X-ray fluorescence spectrometry (XRF), X-ray diffraction spectrometry (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results of the mechanical, thermal and morphological properties show that the raw materials were effectively combined with the NovoGro binder; furthermore, the DN, HN and TN pellets exhibited excellent mechanical and thermal properties, including high calorific values (>16.30 MJ/kg), high resistance to mechanical shock (>99%), high volatile matter contents, optimal softening temperatures and optimal ash contents. However, the high K, Ca, and Si contents of the AN can form low-melting-point eutectics, which can cause slagging. Moreover, the AN materials had large particle sizes, and high cellulose and hemicellulose contents led to high total moistures, low softening temperatures and low calorific values. The AN was not suitable for use as a fuel. The results suggested that NG is an effective binder for pelletization of biomass and showed the feasibility of using municipal solid wastes for energy production.