Palladium-catalyzed reductive coupling of phenols with anilines and amines: efficient conversion of phenolic lignin model monomers and analogues to cyclohexylamines.

Phenols, being readily available from naturally abundant lignins, are important future feedstocks for the renewable production of fuels, chemicals, and energy. Herein, a highly efficient Pd-catalyzed direct coupling of phenolic lignin model monomers and analogues with anilines to give cyclohexylamines using cheap and safe sodium formate as hydrogen donor is described. A variety of secondary and tertiary substituted cyclohexylamines can be synthesized under convenient conditions in moderate to excellent yields.

Lignocellulosic biomass represents the most abundant under-utilized organic matter and provides potential renewable feedstock for the production of fuels, chemicals, and energy in the future.1 However, lignin (the key component of lignocellulose) is a complicated three-dimensional amorphous polymer composed of substituted phenols.2 Owing to its irregularity and complexity, the lignin structure is often represented by model compounds such as phenol, guaiacol, 4-propylphenol, diphenylether, vanillin, guaiacylpropane, syringol, and syringylpropane, for chemical studies.3 Over the past decades, important progress has been made in catalytic conversions of lignin model compounds to valuable chemicals via oxidations,4 reductions,5 redox-neutral processes,6 and others.3,7

Amines are important structural motifs and intermediates for fine chemicals, pharmaceuticals, agrochemicals and natural products.8 Consequently, the development of general and efficient methods for the derivatization of amines is an active research topic in modern organic synthesis and medicinal chemistry.9 There are three general methods for direct amine alkylations: (1) via nucleophilic substitution of alkyl halides with amines (Scheme 1, route I);10 (2) via N-alkylation of amines with alcohols under catalytic conditions (Scheme 1, route II);11 and (3) via the reductive amination of carbonyl compounds and amines (Scheme 1, route III).12 Very recently, Beller's group presented a straightforward catalytic N-alkylation of amines using carboxylic acids and silanes as reducing agents.13 An alternative method for synthesis of alkylamines was achieved by Buchwald–Hartwig amination via N-arylation (Scheme 1, route IV).14 With an endeavor to develop novel methods to convert lignin into high-value chemicals, herein we report a highly efficient palladium-catalyzed reaction between anilines and phenolic lignin model monomers and analogues.15 It is noteworthy that the transformation represents a new catalytic technique to promote a C–O bond cleavage.16 Moreover, the direct use of phenolic compounds as building blocks in this transformation provides a new non-fossil-approach towards cyclohexylamine derivatives, widely explored structural units in the pharmaceutical industry.17

Scheme 1

Methods for direct amine alkylations.

To begin our research, we chose the reaction between phenol (1a) with p-toluidine (2a) as the prototype. Our initial investigations were focused on attempts to achieve the transformation by using common metal catalysts. Many transition-metal complexes such as Rh, Ru, Pt, Ni, and Ir failed to produce any desired coupling products. To our delight, Pd/C can efficiently catalyze the reaction to produce 3a in 94% yield (Table 1, entry 1). The control experiment showed that the catalyst is essential for the reaction (Table 1, entry 2). Then, a variety of palladium catalysts were tested and Pd/C provided the best results (Table 1, entries 3–7). The reaction showed a strong dependence on the solvent, among which THF, ethanol, dioxane, and water were also effective besides toluene (Table 1, entries 8–13). The reaction was the most effective when conducted at 100 °C; whereas a higher or lower temperature resulted in a lower yield (Table 1, entries 14 and 15). An amount of 7 mol% of Pd/C appeared to be the optimal catalyst loading (Table 1, entries 16 and 17). It was found that the product was obtained in 66% yield when H2 was used as an alternative hydrogen source (Table 1, entry 18).

Table 1

Optimization of reaction conditions for cyclohexylation of p-toluidine with phenol

Entry	Catalyst	Solvent	T/°C	Yield b /%
1	Pd/C	Toluene	100	94
2	—	Toluene	100	n.r.
3	PdCl2	Toluene	100	n.r.
4	Pd(PPh3)4	Toluene	100	n.r.
5	Pd(dba)2	Toluene	100	34
6	Pd(PPh3)2Cl2	Toluene	100	n.r.
7	PdCl2(dtbpf)	Toluene	100	n.r.
8	Pd/C	THF	100	89
9	Pd/C	EtOH	100	47
10	Pd/C	Dioxane	100	86
11	Pd/C	H2O	100	80
12	Pd/C	MeCN	100	n.p.
13	Pd/C	DMF	100	n.r.
14	Pd/C	Toluene	120	86
15	Pd/C	Toluene	80	73
16 c	Pd/C	Toluene	100	95(92)
17 d	Pd/C	Toluene	100	83
18 e	Pd/C	Toluene	100	66

Reaction conditions: phenol (0.2 mmol), p-toluidine (0.2 mmol), catalyst (10 mol%), sodium formate (6 equiv.) and solvent (0.8 mL) under an argon atmosphere.

Yields were determined by GC analysis with mesitylene as internal standard; isolated yields in brackets.

Pd/C (7 mol%) was used.

Pd/C (5 mol%) was used.

H2 (1 atm) was used instead of sodium formate.

With the optimized reaction conditions in hand, we set out to test the generality of this reaction with regard to both reaction partners (Tables 2 and 3). We first investigated the scope of anilines by reacting with phenol under the optimized standard conditions. The reaction furnished the corresponding secondary or tertiary aniline derivatives in moderate to excellent yields (Table 2, 3a–u). Various anilines bearing electron-withdrawing and/or electron-donating groups were all effective for the transformation. In addition, the product yields were only slightly affected by the location of the substituents (on ortho-, meta-, or para-positions of the benzene ring) (Table 2, 3a–e and 3h–j). However, when both ortho positions were substituted, a moderate yield was obtained due to the increased steric hindrance (Table 2, 3g). Furthermore, both 2,4-dimethoxy substituted and 2,5-dimethoxy substituted anilines afforded the corresponding products efficiently, with the latter being slightly more effective (Table 2, 3k and 3l). For the aniline bearing a vinyl substituent, the product was formed in 75% yield in which the vinyl group was also reduced to an ethyl group (Table 2, 3m). Challenging substrates such as 2n (sterically hindered), 2o (diamine), 2p (free diamine, giving monocyclohexylation product selectively), 2q (quinoline), and 2r (an electron-withdrawing group) were all compatible with the standard conditions. It is noteworthy that the carbonyl-containing substrate gave the desired product in 51% yield in 16 h, in which the carbonyl survived and could be further reduced to an alkyl group with a prolonged reaction time (Table 2, 3s). Moreover, the standard conditions were compatible with secondary amines and afforded the tertiary amine products in good yields (Table 2, 3t and 3u). Aliphatic amines could also give the corresponding products in good yields (Table 2, 3v and 3w). Importantly, the product could be obtained in 84% yield when we scaled up the reaction to 11 mmol (1.03 g) (Table 2, 3a). As expected, the corresponding dehalogenated cyclohexyl amines were obtained when halo-substituted phenols or anilines were used as substrates.

Table 2

Pd-catalyzed cyclohexylation of various aniline derivatives and amines with phenol

Reaction conditions: phenol (0.2 mmol), arylamine (0.2 mmol), Pd/C (7 mol%), sodium formate (6 equiv.) and toluene (0.8 mL) at 100 °C for 24 h under an argon atmosphere; yields of isolated products are given.

The reaction was run at 11 mmol scale.

Reacted for 36 h.

3-Vinylaniline was used as the substrate.

Reacted for 16 h.

Reacted for 36 h.

Reacted at 80 °C.

Table 3

Reaction of various substituted phenols and aniline derivatives

Reaction conditions: 1 (0.2 mmol), 2 (0.24 mmol), Pd/C (7 mol%), sodium formate (6 equiv.) and toluene (0.8 mL) at 120 °C for 24 h under an argon atmosphere; isolated yield and the ratio of cis/trans isomers was determined by crude 1H NMR analysis.

Naphthalen-1-ol was used as substrate.

Naphthalen-2-ol was used as substrate.

Catechol was used as substrate.

Hydroquinone was used as substrate with 2 equiv. aniline.

Continuing investigations of the reaction scope, various substituted phenols were explored (Table 3). With the presence of an additional substituent, diastereoisomers will be formed. Gratifyingly, in all cases, the reaction proceeded effectively at a slightly elevated temperature (120 °C), with the ratios of the cis/trans isomers ranging between 9 : 1 and 1 : 1 (Table 3, 4a–m and 4q). In general, both electron-rich and electron-deficient substituents on the phenol were compatible with the reaction (Table 3, 4a–m). For example, 4-propylphenol (as the most prevalent structural unit in lignin) gave the corresponding product in good yield (Table 3, 4d). The phenol bearing a bulky tert-butyl group afforded the product in a moderate yield (Table 3, 4g). Furthermore, both α- and β-naphthols also reacted smoothly with p-toluidine to give the corresponding products in moderate yields (Table 3, 4n and 4o). Finally, the dihydroxybenzenes, catechol and hydroquinone, could also react to provide the mono and di-substituted products in 77% and 69% yields, respectively (Table 3, 4p and 4q).

Interestingly, when 3-methoxyphenol was reacted with p-toluidine and aniline under the standard conditions at 120 °C, 3a and 3b were obtained in 84 and 90% yields, respectively, most likely resulting from the sequential reduction–elimination–reduction–imine formation–reduction processes (Scheme 2a). When 3-phenoxyphenol was used, similar transformation occurred and 3a was obtained in 70% yield (Scheme 2b), which shows promise of this work for direct lignin utilizations.

Scheme 2

Pd-catalyzed formation of secondary amines from 3-substituted phenols and anilines.

A tentative mechanism for the reaction was proposed in Scheme 3: firstly, phenol was reduced into cyclohexanone18 under the [Pd]/[H]-catalyzed reductive conditions.19 Then, the imine intermediate B was formed through the standard condensation between aniline and cyclohexanone. Finally, reduction of the imine intermediate under [Pd]/[H] generated the cyclohexylaniline derivative and regenerated the active palladium catalyst.20

Scheme 3

Tentative mechanism for the reaction between phenol and aniline.

Conclusions

In conclusion, we have developed a simple, efficient, and novel Pd-catalyzed direct reductive coupling of phenols with amines for the formation of secondary and tertiary cyclohexylamine derivatives. A wide range of substituted phenols and aniline derivatives could be coupled effectively by this method. Aliphatic amines are also effective by this method. In addition, the reaction employed cheap sodium formate as the hydrogen donor, avoiding the use of a potentially hazardous pressurized H2 atmosphere. Furthermore, the reaction of the phenolic lignin model compounds provides great opportunities for using lignin as a renewable feedstock for chemical synthesis. Further studies on the reaction mechanism and applications of this methodology are currently under way in our laboratory.

Click here for additional data file.