| Literature DB >> 28569376 |
Anouk L M Eikendal1, Hester M den Ruijter2, Cees Haaring3, Tobias Saam4, Rob J van der Geest5, Jos J M Westenberg5, Michiel L Bots6, Imo E Hoefer7, Tim Leiner3.
Abstract
OBJECTIVES: More detailed evaluation of atherosclerosis and its key determinants in young individuals is warranted to improve knowledge on the pathophysiology of its development and progression. This study evaluated associations of magnetic resonance imaging (MRI)-derived aortic wall area, wall thickness, and pulse wave velocity (PWV) with cardiovascular risk factors in asymptomatic, young adults.Entities:
Keywords: Health; MRI; Risk factors; Young adult
Mesh:
Year: 2017 PMID: 28569376 PMCID: PMC5813077 DOI: 10.1007/s10334-017-0626-z
Source DB: PubMed Journal: MAGMA ISSN: 0968-5243 Impact factor: 2.310
Fig. 1Illustration of 3D-T1-BB-VISTA sequence and measurement of aortic wall geometry (32-year-old female participant). Left illustration of sagittal and transversal (reconstructed) images of the descending thoracic aorta acquired using the 3D-T1-BB-VISTA sequence. Right illustrations of quantification methods of aortic wall area and wall thickness. a, b A schematic and in vivo example of tracing of the luminal and outer contours, as well as an aortic wall thickness measurement. c A graphic illustration of the method of quantification of aortic wall area and wall thickness. Each zone between two blue lines embodies an aortic wall section. In each section, 25 thickness measurements are performed, generating in total 100 thickness measurements per image
Fig. 2Example of double oblique, through-plane velocity-encoded images and of PWV measurement (32-year-old female participant). Upper left illustration of traced double oblique image. Tracing was performed along the centerline of the aorta to measure aortic lengths. Middle/lower left illustration of traced through-plane images. Contours were traced in the ascending and proximal descending aorta (acquisition 1 middle left) and near the dome of the liver (acquisition 2 lower left) for aortic velocity mapping. Right example of velocity graph, generated using PWVAppStatic. PWV of the total thoracic aorta was measured using linear modelling
Characteristics of study population
|
| Total population | |
|---|---|---|
|
| ||
| Age (years), median (Q1, Q3)a | 124 | 31.8 (29.1, 34.1) |
| Sex (men), | 124 | 59 (47.6) |
| Current cigarette smoking (yes), | 124 | 27 (21.8) |
| Former cigarette smoking (yes), | 124 | 23 (18.5) |
| Diabetes mellitus (yes), | 124 | 1 (0.8%) |
|
| ||
| Height (cm), mean (SD)a | 124 | 176.6 (8.8) |
| Weight (kg), mean (SD)a | 124 | 73.5 (11.6) |
| Waist circumference (cm), mean (SD)a | 124 | 79.6 (8.8) |
| Hip circumference (cm), median (Q1, Q3)a | 124 | 87.0 (82.0, 92.0) |
| BMI (kg/m2), median (Q1, Q3)a | 124 | 23.2 (21.6, 25.0) |
| SBP (mm Hg), mean (SD)a | 124 | 128.0 (12.0) |
| DBP (mm Hg), mean (SD)a | 124 | 79.0 (8.0) |
|
| ||
| Total cholesterol level (mmol/L), mean (SD)a | 122 | 4.6 (0.8) |
| HDL-cholesterol level (mmol/L), median (Q1, Q3)a | 122 | 1.4 (1.2, 1.7) |
| LDL-cholesterol level (mmol/L), mean (SD)a | 122 | 2.6 (0.7) |
| Triglyceride level (mmol/L), median (Q1, Q3)a | 122 | 1.2 (0.9, 1.8) |
| Glucose level (mmol/L), median (Q1, Q3)a | 122 | 5.1 (4.7, 5.5) |
|
| ||
| Mean aortic wall area (cm2), mean (SD)a | 124 | 1.0 (0.1) |
| Mean aortic wall thickness (mm), median (Q1, Q3)a | 124 | 1.5 (1.4, 1.7) |
| Pulse wave velocity (m/s), median (Q1, Q3)a | 118 | 4.4 (4.1, 4.8) |
a Q1 25th percentile, Q3 75th percentile, SD standard deviation, BMI body mass index, SBP systolic blood pressure, DBP diastolic blood pressure, HDL high-density lipoprotein, LDL low-density lipoprotein
Relation between classical cardiovascular risk factors and aortic characteristics
| Aortic wall area (cm2)a
|
| Aortic wall thickness (mm)ab
|
| Aortic PWV (m/s)ab
|
| |
|---|---|---|---|---|---|---|
|
| ||||||
| Model 1 | 0.01 (5.00 × 10−3, 2.00) | 0.001§ | 3.00 × 10−3 (−3.00 × 10−3, 0.01) | 0.34 | −3.00 × 10−4 (−0.01, 9.00 × 10−3) | 0.95 |
| Model 2 | 0.01 (2.00 × 10−3, 0.02) | 0.01§ | 2.00 × 10−3 (−4.00 × 10−3, 9.00 × 10−3) | 0.48 | −1.00 × 10−4 (−0.01, 9.00 × 10−3) | 0.99 |
|
| ||||||
| Model 1 | −0.07 (−0.11, −0.03) | 0.002§ | 0.02 (−0.02, 0.06) | 0.44 | −0.01 (−0.07, 0.05) | 0.70 |
| Model 2 | −0.06 (−0.11, −0.01) | 0.02§ | 0.02 (−0.03, 0.07) | 0.39 | −0.01 (−0.08, 0.05) | 0.72 |
|
| ||||||
| Model 1 | −0.01 (−0.07, 0.04) | 0.65 | 0.01 (−0.04, 0.06) | 0.67 | 0.02 (−0.05, 0.09) | 0.60 |
| Model 2 | −0.03 (−0.08, 0.03) | 0.37 | −1.00 × 10−3 (−0.05, 0.05) | 0.97 | 0.01 (−0.06, 0.09) | 0.70 |
|
| ||||||
| Model 1 | 0.07 (0.02, 0.13) | 0.01 | 0.01 (−0.04, 0.06) | 0.74 | 0.02 (−0.04, 0.09) | 0.48 |
| Model 2 | 0.04 (−0.02, 0.10) | 0.18 | 0.02 (−0.05, 0.06) | 0.93 | 0.03 (−0.05, 0.09) | 0.57 |
|
| ||||||
| Model 1 | 0.01 (0.01, 0.02) | 0.001§ | 0.01 (1.00 × 10−3, 0.02) | 0.03§ | 0.01 (−1.00 × 10−3, 0.02) | 0.09 |
| Model 2 | 0.01 (0.01, 0.02) | 0.003§ | 0.01 (1.00 × 10−3, 0.02) | 0.02§ | 2.00 × 10−4 (−0.01, 0.01) | 0.72 |
|
| ||||||
| Model 1 | 0.02 (3.00 × 10−3, 0.04) | 0.02§ | 0.01 (−0.01, 0.03) | 0.19 | 0.05 (0.03, 0.07) | <0.001§ |
| Model 2 | 3.00 × 10−3 (−0.02, 0.02) | 0.74 | 0.01 (−0.01, 0.03) | 0.23 | 0.06 (0.03, 0.09) | <0.001§ |
|
| ||||||
| Model 1 | 0.01 (−0.02, 0.04) | 0.42 | 0.01 (−0.02, 0.04) | 0.45 | 0.06 (0.02, 0.09) | 0.001§ |
| Model 2 | −0.01 (−0.04, 0.02) | 0.57 | 2.00 × 10−3 (−0.03, 0.03) | 0.88 | 0.06 (0.02, 0.09) | 0.006§ |
|
| ||||||
| Model 1 | 0.01 (−0.02, 0.04) | 0.35 | 4.00 × 10−3 (−0.02, 0.03) | 0.74 | 0.02 (−0.02, 0.05) | 0.31 |
| Model 2 | −0.01 (−0.04, 0.02) | 0.60 | −0.01 (−0.04, 0.02) | 0.42 | 0.01 (−0.03, 0.05) | 0.77 |
|
| ||||||
| Model 1 | −0.04 (−0.10, 0.03) | 0.30 | 0.02 (−0.04, 0.08) | 0.59 | 0.02 (−0.07, 0.11) | 0.66 |
| Model 2 | 0.03 (−0.42, 0.11) | 0.39 | 0.03 (−0.05, 0.10) | 0.50 | 0.04 (−0.06, 0.14) | 0.39 |
|
| ||||||
| Model 1 | 3.00 × 10−3 (−0.03, 0.04) | 0.87 | 1.00 × 10−3 (−0.03, 0.03) | 0.93 | 2.00 × 10−3 (−0.04, 0.04) | 0.92 |
| Model 2 | −0.02 (−0.05, 0.01) | 0.25 | −0.01 (−0.04, 0.02) | 0.48 | −2.00 × 10−3 (−0.05, 0.04) | 0.94 |
|
| ||||||
| Model 1 | 3.00 × 10−4 (−4.00 × 10−3, 0.01) | 0.89 | 2.00 × 10−3 (−2.00 × 10−3, 0.01) | 0.24 | 2.00 × 10−3 (−4.00 × 10−3, 0.01) | 0.50 |
§ p < 0.05
aValues are linear regression coefficients (β) with 95% confidence intervals
bNatural logarithmic transformation was performed
cModel 1: crude model, Model 2: adjusted for age, sex, smoking, BMI, DBP, total cholesterol, and HDL cholesterol
d BMI body mass index, SBP systolic blood pressure, DBP diastolic blood pressure, HDL high-density lipoprotein, LDL low-density lipoprotein
eSBP was not adjusted for DBP and LDL cholesterol was not adjusted for total cholesterol