Kinya Ishizaka1, Kohsuke Kudo2, Kuniaki Harada3, Toru Shirai4, Taro Fujiwara1, Suzuko Aoike1, Sayaka Takamori1, Hiroki Shirato5,6. 1. Department of Radiological Technology, Hokkaido University Hospital, Sapporo, Japan. 2. Division of Diagnostic and Interventional Radiology, Hokkaido University Hospital, Sapporo, Japan. 3. Hitachi, Ltd., Healthcare Business Unit, Tokyo, Japan. 4. Hitachi, Ltd., Research and Development Group, Tokyo, Japan. 5. Department of Radiation Medicine, Hokkaido University Graduate School of Medicine, Sapporo, Japan. 6. Global Station for Quantum Medical Science and Engineering, Global Institution for Collaborative Research and Education, Hokkaido University, Sapporo, Japan.
Abstract
PURPOSE: To evaluate the homogeneity of the radiofrequency magnetic field (B1+ ) and signal intensity using different arm positions during 3T thoracolumbar spinal imaging. MATERIALS AND METHODS: Twenty volunteers were scanned with a four-channel radiofrequency (RF) transmit coil at 3T, with arms on the bed (conventional), arms elevated by 100 mm (arm lift), or with the arms-up position (elevated arm). Axial B1+ maps and sagittal T1 -weighted image (T1 WI)-performed RF shimming were obtained for each arm position. The mean and standard deviation (SD) of the flip angle (FA) at the center of the vertebra on each B1+ map, and contrast noise ratios (CNRs) between the spinal cord and cerebrospinal fluid of sagittal T1 WI, were calculated and compared among the different arm positions. RESULTS: Mean FA values (degrees) for the arm lift and elevated arm positions were significantly larger than for the conventional position (P < 0.001 for both) at the twelfth thoracic vertebra (Th12). FA SD values for the arm lift and elevated arm position were significantly smaller than for the conventional position (P < 0.001 for both) at Th12. CNR for the arm lift and elevated arm position were significantly higher than for the conventional position (P = 0.007 and 0.002, respectively). The mean and SD of the FA and the CNR did not differ significantly for the arm lift and elevated arm positions (P = 0.591, 0.958, and 0.927, respectively). CONCLUSION: Inhomogeneities of B1+ and signal intensities were improved by simply changing the arm position in 3T thoracolumbar spinal imaging. LEVEL OF EVIDENCE: 3 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2018;47:123-130.
PURPOSE: To evaluate the homogeneity of the radiofrequency magnetic field (B1+ ) and signal intensity using different arm positions during 3T thoracolumbar spinal imaging. MATERIALS AND METHODS: Twenty volunteers were scanned with a four-channel radiofrequency (RF) transmit coil at 3T, with arms on the bed (conventional), arms elevated by 100 mm (arm lift), or with the arms-up position (elevated arm). Axial B1+ maps and sagittal T1 -weighted image (T1 WI)-performed RF shimming were obtained for each arm position. The mean and standard deviation (SD) of the flip angle (FA) at the center of the vertebra on each B1+ map, and contrast noise ratios (CNRs) between the spinal cord and cerebrospinal fluid of sagittal T1 WI, were calculated and compared among the different arm positions. RESULTS: Mean FA values (degrees) for the arm lift and elevated arm positions were significantly larger than for the conventional position (P < 0.001 for both) at the twelfth thoracic vertebra (Th12). FA SD values for the arm lift and elevated arm position were significantly smaller than for the conventional position (P < 0.001 for both) at Th12. CNR for the arm lift and elevated arm position were significantly higher than for the conventional position (P = 0.007 and 0.002, respectively). The mean and SD of the FA and the CNR did not differ significantly for the arm lift and elevated arm positions (P = 0.591, 0.958, and 0.927, respectively). CONCLUSION: Inhomogeneities of B1+ and signal intensities were improved by simply changing the arm position in 3T thoracolumbar spinal imaging. LEVEL OF EVIDENCE: 3 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2018;47:123-130.