Literature DB >> 28399482

Functionalized polymer-iron oxide hybrid nanofibers: Electrospun filtration devices for metal oxyanion removal.

Katherine T Peter1, Adam J Johns1, Nosang V Myung2, David M Cwiertny3.   

Abstract

Via a single-pot electrospinning synthesis, we developed a functionalized polymer-metal oxide nanofiber filter for point of use (POU) water treatment of metal oxyanions (e.g., arsenate and chromate). Polyacrylonitrile (PAN) functionalization was accomplished by inclusion of surface-active, quaternary ammonium salts (QAS) [cetyltrimethylammonium bromide (CTAB) or tetrabutylammonium bromide (TBAB)] that provide strong base ion exchange sites. Embedded iron oxide [ferrihydrite (Fh)] nanoparticles were used for their established role as metal sorbents. We examined the influence of QAS and Fh loading on composite properties, including nanofiber morphology, surface area, surface chemical composition, and the accessibility of embedded nanoparticles to solution. Composite performance was then evaluated using kinetic, isotherm, and pH-edge sorption experiments with arsenate and chromate, and benchmarked to unmodified PAN nanofibers and freely dispersed Fh nanoparticles. We also assessed the long-term stability of QAS in the composite matrix. For composites containing QAS or Fh nanoparticles, increasing QAS/Fh nanoparticle loading generally yielded increasing metal oxyanion uptake. The optimized composite (PAN 7 wt%, Fh 3 wt%, TBAB 1 wt%) exhibited two distinct sites for simultaneous, non-competitive metal binding (i.e., iron oxide sites for arsenate removal via sorption and well-retained QAS sites for chromate removal via ion exchange). Moreover, surface-segregating QAS enriched Fh abundance at the nanofiber surface, allowing immobilized nanoparticles to exhibit reactivity comparable to that of unsupported (i.e., suspended or freely dispersed) nanoparticles. To simulate POU application, the optimized composite was tested in a dead-end, flow-through filtration system for arsenate and chromate removal at environmentally relevant concentrations (e.g., μg/L) in both idealized and simulated tap water matrices. Performance trends indicate that dual mechanisms for uptake are maintained in kinetically limited regimes. Although chromate removal via ion exchange is more susceptible to interfering counter-ions, arsenate removal in simulated tap water indicates that ∼130 g of the composite could produce an individual's annual supply of drinking water (assuming an influent contaminated with 100 μg As/L, which is 10 times the current MCL).
Copyright © 2017 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Arsenic; Chromium; Electrospinning; Environmental nanotechnology; Ion exchange; Point of use water treatment

Mesh:

Substances:

Year:  2017        PMID: 28399482     DOI: 10.1016/j.watres.2017.04.007

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  3 in total

1.  Clean application of magnetic biomaterial for the removal of As (III) from water.

Authors:  Agnes Pholosi; Bobby E Naidoo; Augustine E Ofomaja
Journal:  Environ Sci Pollut Res Int       Date:  2018-08-29       Impact factor: 4.223

2.  U(VI) binding onto electrospun polymers functionalized with phosphonate surfactants.

Authors:  Nabil Shaikh; Jiajie Qian; Sewoon Kim; Hoa Phan; Juan S Lezama-Pacheco; Abdul-Mehdi S Ali; David M Cwiertny; Tori Z Forbes; Amanda J Haes; José M Cerrato
Journal:  J Environ Chem Eng       Date:  2022-08-17

3.  FUNCTIONALIZED ELECTROSPUN POLYMER NANOFIBERS FOR TREATMENT OF WATER CONTAMINATED WITH URANIUM.

Authors:  Adam Johns; Jiajie Qian; Margaret E Carolan; Nabil Shaikh; Allison Peroutka; Anna Seeger; José M Cerrato; Tori Z Forbes; David M Cwiertny
Journal:  Environ Sci (Camb)       Date:  2019-12-12       Impact factor: 4.251

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.