Literature DB >> 28146095

Synthesis of 16 New Hybrids from Tetrahydropyrans Derivatives and Morita-Baylis-Hillman Adducts: In Vitro Screening against Leishmania donovani.

Suervy Canuto de Oliveira Sousa1, Juliana da Câmara Rocha2, Tatjana de Souza Lima Keesen3, Everton da Paz Silva4, Priscilla Anne Castro de Assis5,6, João Paulo Gomes de Oliveira7, Saulo Luís Capim8, Francisco José Seixas Xavier9, Bruno Guimarães Marinho10, Fábio Pedrosa Lins Silva11, Claudio Gabriel Lima-Junior12, Mário Luiz Araújo de Almeida Vasconcellos13.   

Abstract

Leishmaniases are a group of neglected tropical diseases (NTDs) caused by protozoan parasites from >20 Leishmania species. Visceral leishmaniasis (VL), also known as kala-aza, is the most severe form of leishmaniasis, usually fatal in the absence of treatment in 95% of cases. The Morita-Baylis-Hillman adducts (MBHAs) are being explored as drug candidates against several diseases, one of them being leishmaniasis. We present here the design, synthesis and in vitro screening against Leishmania donovani of sixteen new molecular hybrids from analgesic/antiinflammatory tetrahydropyrans derivatives and Morita-Baylis-Hillman adducts. First, acrylates were synthesized from analgesic/anti-inflammatory tetrahydropyrans using acrylic acid under TsOH as a catalyst (70-75% yields). After the 16 new MBHAs were prepared in moderate to good yields (60-95%) promoted by microwave irradiation or low temperature (0 °C) in protic and aprotic medium. The hybrids were evaluated in vitro on the promastigote stage of Leishmania donovani by determining their inhibitory concentrations 50% (IC50), 50% hemolysis concentration (HC50), selectivity index (HC50/IC50,), and comparing to Amphotericin B, chosen as the anti-leishmanial reference drug. The hybrid which presents the bromine atom in its chemical structure presents high leishmanicide activity and the high selectivity index in red blood cells (SIrb > 180.19), compared with the highly-toxic reference drug (SIrb = 33.05), indicating that the bromine hybrid is a promising compound for further biological studies.

Entities:  

Keywords:  Antileishmanial Morita‐Baylis‐Hillman adducts;   molecular hybridization;  Leishmania donovani.;  opioids tetrahydropyrans derivatives

Mesh:

Substances:

Year:  2017        PMID: 28146095      PMCID: PMC6155752          DOI: 10.3390/molecules22020207

Source DB:  PubMed          Journal:  Molecules        ISSN: 1420-3049            Impact factor:   4.411


1. Introduction

Neglected tropical diseases (NTDs) are those that occur primarily in poor countries. Drugs to treat these diseases are few, and usually lead to severe side effects, since the buying power of these populations is very low, not being attractive to global pharmaceutical industries to invest money on the development of drugs for these diseases [1]. Leishmaniases are a group of NTDs caused by protozoan parasites from >20 Leishmania species [2]. Visceral leishmaniasis (VL), also known as kala-azar, is the most severe form of leishmaniasis, usually fatal in the absence of treatment in over 95% of cases [3]. Leishmania donovani is one of the major species of the genus Leishmania that causes VL, affecting more than 100 million people worldwide, with 500,000 new cases and more than 50,000 deaths each year [4]. Due to inexistence of vaccines for humans and that the available chemotherapy is toxic and expensive, research aiming to obtain new efficient drugs is of great urgency. The Morita-Baylis-Hillman adducts (MBHAs) are being explored as drug candidates against several diseases, one of them being leishmaniasis [5]. These compounds are prepared from the Morita-Baylis-Hillman reaction [6,7] in green conditions from aldehydes (among other electrophiles) or alkenes connected to electron attractor groups (EAG, like methyl acrylate, acrylonitrile, and others) under basic catalysis (DABCO being the most common base, Scheme 1).
Scheme 1

General Morita-Baylis-Hillman reaction. EAG = electron attractor group. Ar = aryl or heteroaryl, R = alkyl or H.

Molecular hybridization is a useful tool in the design of new drug prototypes [8]. It was reported by us that the hybridization between an analgesic/anti-inflammatory methyl salicylate (2) and the MBHA (3) resulting in the development of a chalcone-like compound (1) that is more active as a leishmanicide than corresponding precursors [9]. In 2016 we also described the synthesis of a new hybrid (5) from an analgesic and anti-inflammatory eugenol (4) that presents a stronger leishmanicidal activity than compound 1 [10] (Figure 1).
Figure 1

The leishmanicidal activity of hybrids 1 and 5 and their precursors. The analgesic/anti-inflammatory 6 and 7.

In a different line of research from our group, synthesis and in vivo experiments were described that demonstrate that tetrahydropyran derivative 6 is very efficient and is a non-toxic analgesic/anti-inflammatory [11,12]. It was published the synthesis of (±)-cis,cis-6 [13,14] and recently the anti-hyperalgesic effect of is associated with NO/cGMP/KATP pathway participation and the κ-opioid receptor [15]. Additionally, it was recently discovered that the tetrahydropyran derivative (±)-cis-7 [16,17] presents an analgesic effect in the same order of magnitude (μmol·kg−1) than the analogous 6 (Figure 1) [16]. In connection with our interest in the discovery of new Morita-Baylis-Hillman adducts with promising leishmanicidal and other bioactivities [5,18,19,20,21], we present here the design, synthesis, and in vitro screening against Leishmania donovani of sixteen new molecular hybrids (8a–h and 9a–h, Figure 2). It is important to note here that our design is based on the fact that inhibitors of opioid receptors participate in the mechanism of action against leishmaniasis interfering with the immune system, not only participating in the function of the immune cells, but also modulating innate and acquired immune responses [22].
Figure 2

The synthetized hybrids 8a–8h and 9a–9h.

2. Results and Discussion

2.1. Chemistry

Compounds 6 and 7 were prepared in the same way as described in the literature [11,13]. Synthesis of new hybrids 8a–8h (spectra, see in Supplementary Materials) were made via the Morita-Baylis-Hillman reaction (MBHR) between acrylate 10 and aromatic aldehydes ArCHO (Scheme 2) under DABCO as a promoter (conditions and yields are described in Table 1). Acrylate 10 was synthetized from 6 using acrylic acid under TsOH as a catalyst (70%, Scheme 2). In the same way, the new acrylate 11 was prepared from 7 (Scheme 3) with 75% yield. The conditions and yields of the MBH reaction between 11 and ArCHO, to prepare the hybrids 9a–9h (spectra, see in Supplementary Materials) are presented in Table 2.
Scheme 2

(i) Acrylic acid (2 equiv.), TsOH (20 mol%), anhydrous CH2Cl2, 50 °C, two days, 70% yield. (ii) MBHR between 10 and ArCHO (conditions and yields in Table 1).

Table 1

Conditions and yields in the synthesis of new hybrids 8a–8h.

EntryArHybridSolvent aTemp. (°C) bTime (h)Yield (%) c
1o-nitrophenyl8at-buOH/H2O80 Mw185
2m-nitrophenyl8bt-buOH/H2O80 Mw0.734d
3m-nitrophenyl8bDMF:H2O04881
4p-nitrophenyl8ct-buOH/H2O80 Mw0.786
52-pyridinyl8dt-buOH/H2O80 Mw1.381
63-pyridinyl8et-buOH/H2O80 Mw280
74-pyridinyl8ft-buOH/H2O80 Mw187
8α-naphthyl8gt-buOH/H2O80 Mw2n.r.
9α-naphthyl8gDMF:H2O04845
10p-bromophenyl8ht-buOH/H2O80 Mw2n.r.
11p-bromophenyl8hDMF:H2O024060

a Mixture of 9:1; b Mw = microwave irradiation; c isolated yields; d co-products were observed; n.r.= no reaction.

Scheme 3

(i) Acrylic acid (2 equiv.), TsOH (20 mol%), anhydrous CH2Cl2, 50 °C, two days, 75% yield. (ii) MBHR between 11 and ArCHO (conditions and yields in Table 2).

Table 2

Conditions and yields in the synthesis of new hybrids 9a–9h.

EntryArHybridSolvent aTemp. (°C) bTime (h)Yield (%) c,d
1o-nitrophenyl9at-buOH/H2O80 Mw0.774
2m-nitrophenyl9bt-buOH/H2O80 Mw0.778
3p-nitrophenyl9ct-buOH/H2O80 Mw0.395
42-pyridinyl9dt-buOH/H2O80 Mw0.896
53-pyridinyl9et-buOH/H2O80 Mw1.380
64-pyridinyl9ft-buOH/H2O80 Mw0.772
74-pyridinyl9ft-buOH/H2O, PhOH80 Mw0.396
8α-naphthyl9gt-buOH/H2O80 Mw2n.r.
9α-naphthyl9gDMF/H2O, PhOH 09665
10p-bromophenyl9ht-buOH/H2O80 Mw2n.r.
11p-bromophenyl9hDMF/H2O, PhOH024050

a Mixture of 9:1; b Mw = microwave irradiation; c isolated yields; d co-products were not observed.

The general proposal mechanism of MBHR is presented in Scheme 4.
Scheme 4

The general proposal mechanism of MBHR.

However, the slow step of the mechanism and the transition state structure has been the main source of controversy [7]. To date, the slow step has been proposed to change between the aldol step (step 2) and the elimination step (step 3). In fact, depending on various parameters, such as the Michael acceptor used as the reagent, solvents, addition or not of phenolic additives, temperature (may be reversible or not), many different catalysts, etc. [7], MBHR is an exquisite reaction and each reaction must have its experimental parameters carefully optimized as an individual problem. However, some facts are incontestable: the MBHR between methyl acrylate reacting with p-bromobenzaldehyde is reversible at elevated temperatures [21]; several MBHR are faster at 0 °C than at room temperature [23,24]; and the type of solvent (aprotic or protic) [25,26] and the phenol or naphthol additives modifies the reactions rate. We can see in Table 1 (Entries 1, 2, 4–8, 10 ) and Table 2 (Entries 1–6, 8 and 10) that it used t-buOH/H2O at 80 °C under microwave irradiation as the first experimental attempt [21]. When this condition was not efficient, low temperatures were used (0 °C) in DMF/water as the solvent mixture and used phenol as the additive, increasing yields (Entries 7, 9 and 11, Table 2). Addition of phenol as an additive with t-buOH/H2O at 80 °C under microwave irradiation also improves the rate and yields (compare entries 6 and 7, Table 2). These delicate results can be interpreted based on the experimental studies on the MBHR described recently by Plata and Singleton [27]. Enthalpy and entropy of activations, contributions in ΔG≠ were measured on the methyl acrylate and p-nitrobenzaldehyde reaction in methanol as a solvent and DABCO as a promoter, proving the pivotal importance of entropic parameters in the slow step of this reaction.

2.2. Biology

The hybrids 8a–8h and 9a–9h were evaluated in vitro on the promastigote stage of Leishmania donovani by determining their inhibitory concentrations 50% (IC50), 50% hemolysis concentration (HC50), selectivity index (HC50/IC50,), and comparing to Amphotericin B, chosen as the anti-leishmanial reference drug (Table 3 and Figure 3).
Table 3

In vitro biological results.

CompoundsIC50 a (μg·mL−1)IC50 a (μM)HC50 b (μg·mL−1)HC50 b (μM)SIrb c
647.53 ± 39172.19 ± 141.25---
7>400>2775.46---
8a7.09 ± 3.014.74 ± 6.23>400>831.38>56.40
8b8.76 ± 4.018.21 ±8.31---
8c9.05 ± 3.318.81 ± 6.85---
8d61.93 ± 18141.67 ± 41.17---
8e8.76 ± 3.820.04 ± 8.69---
8f8.96 ± 4.520.50 ± 10.29---
8g24.51± 7.550.42 ± 15.42---
8h17.17 ± 5.633.40 ± 10.90---
9a5.64 ± 3.016.15 ± 8.60>400>1145.64>70.94
9b13.75 ± 9.839.38 ± 28.06---
9c7.03 ± 4.320.13 ± 12.31>400>1145.64>56.91
9d72.32 ± 26.0240.27 ± 85.20---
9e17.68 ± 7.757.94 ± 25.23---
9f57.76 ± 20.0189.28 ± 65.53---
9g9.73 ± 4.827.47 ± 13.55---
9h2.22 ± 7.65.81 ± 19.90>400>1046.90>180.19
Amphotericin B0.35 ± 0.270.38 ± 0.3011.6112.5633.05

a The half maximal inhibitory concentration; b 50% hemolysis in red blood cells; c SIrb (selectivity index on red blood cell) = HC50/IC50.

Figure 3

In vitro biological results.

The experimental results are shown in Table 3 and deserve comment here. Precursors 6 and 7 had their leishmanicidal activity evaluated (data not shown). Precursor 6 was shown to be effective against L. donovani (IC50 = 172.19 μM), whereas the precursor tetrahydropyrans (THP )with the ethyl portion (7) has no leishmanicida activity (IC50 > 2775.46 μM). Knowing this, the proposal of the work was the molecular hybridization of these precursors with MBHAs presenting anti-leishmania activities already reported, aiming to increase the leishmanicidal activity. Initially hybrids 8a–8h, demonstrated a higher antiparasitic activity against L. donovani compared to precursor 6; leishmanicidal activity with IC50 values ranging from 14.74 μM to 141.67 μM. As can be seen in Table 3, among hybrids 8a–8h, compounds 8a, 8b, 8c, 8e, and 8f showed similar anti-leishmania activity against the promastigote forms of L. donovani, but 8a presented a lesser cytotoxic effect (HC50 >831,38 μM) and the highest selectivity index (S.I. rb > 56.40), showing the most promise of the 8a–8h hybrids. The improvement in leishmanicidal activity was also observed for the hybrids originating from precursor 7 that did not show antiparasitic activity (IC50 > 2775.46 μM), but with the hybrids 9a–9h presented higher antiparasitic activities against L. donovani. The variation of leishmanicidal activities of hybrids 9a–9h IC50 values ranged from 5.81 μM to 240.27 μM. Hybrids 9a, 9c, and 9h were the ones that presented greater tendencies of antiparasitic activities, presenting IC50 values of 16.15 μM, 20.13 μM, and 5.81 μM, respectively. Additionally, values of HC50 were >1000 μM. It should be noted that the high selectivity index of 9h (SIrb > 180.19) compared with the reference drug that presents high toxicity (SIrb = 33.05). The hybrid 9h presents the bromine atom in its chemical structure. In previous works described by our research group we highlight the association between leishmanicidal activity and the presence of bromine atoms as substituents in the aromatic moiety [9,18,19,20,28]. Among the works we highlight two examples. In 2007 we reported a significant increase in leishmanicidal activity in promastigote forms of L. amazonensis when the benzene moiety (49.3 μM) was changed to p-bromobenzyl (12.5 μM) in MBHAs. Furthermore, in these two compounds there was no toxicity measured by the release of lactate dehydrogenase into macrophages (% LDH = 0%) [18]. In 2016 we reported that the homodimer of MBHAs with a bromine atom as a substituent in the aromatic moiety showed very high anti-leishmania activity on L. donovani (0.50 μM) almost 400 times more active than the corresponding monomer and 1.24 times more potent than Amphotericin B (0.62 μM). Moreover, the selectivity index of the homodimer was very high (SIrb > 400), far better than Amphotericin B (SIrb = 18.73) [28]. These results demonstrate that the hybridization reactions were pivotal for the increase of leishmanicidal action and maintaining the absence of toxicity in macrophages and red blood cells of the hybrids, indicating that 9h is a promising compound for further biological studies.

3. Materials and Methods

3.1. Chemistry

3.1.1. General

All commercially available reagents and solvent were obtained from the commercial providers from Sigma-Aldrich® (St. Louis, MO, USA) and used without further purification, except the opioids tetrahydropyrans 6 and 7, which have previously been synthesized. Reactions were monitored by TLC (thin layer chromatography) using silica gel 60 UV254 Macherey-Nagel pre-coated silica gel plates (Macherey-Nagel, Bethlehem, PA, USA); detection was by means of a UV lamp. Flash column chromatography was performed on 300–400 mesh silica gel. Organic layers were dried over anhydrous MgSO4 or Na2SO4 prior to evaporation on a rotary evaporator. 1H and 13C nuclear magnetic resonance (NMR) spectra were recorded using Varian Mercury Spectra AC 20 spectrometer (500 MHz for 1H, 125 MHz for 13C). Chemical shifts were reported relative to internal tetramethylsilane (δ 0.00 ppm) for 1H, and CDCl3 (δ 77.0 ppm) for 13C (Varian, Palo Alto, CA, USA). HRMS was obtained using Q-TOF quadrupole/orthogonal spectrometry (Waters, Milford, MA) in negative or positive mode. Analyses of low-resolution mass spectrometry were obtained via a gas chromatograph coupled with a mass spectrometer, model GCMS–QP2010 from Shimadzu. Infrared spectra (FTIR) data were recorded in a spectrophotometer, model IR Prestige–21 from Shimadzu (Shimadzu, Kyoto, Japan), using potassium bromide (KBr) pellets. Reactions requiring microwave irradiation were performed in a CEM® microwave reactor, Discover model, with a BenchMate system temperature monitor with an infrared sensor (Gilroy, CA, USA).

3.1.2. Procedure for the Synthesis of Acrylate 10 and 11

Tetrahydropyrans 6 or 7 (10 mmol), acrylic acid (20 mmol), p-toluensulfonic acid (20 mol%), and 80 mL anhydrous CH2Cl2 were mixed in a 125 mL flask under a reflux system at 50 °C for two days. The reaction mixture was neutralized with sodium bicarbonate aqueous solution, washed with salt water until pH = 7, and dried by anhydrous sodium sulfate. The mixture was purified by column chromatography, performed using silica gel (230–400 mesh). Acrylates 10 and 11 were obtained with yields of 70% and 75%, respectively.

3.1.3. General Procedure for the Synthesis of MBHA (8a–8h) and (9a–9h)

Reactions were carried out using the acrylates 10 or 11 (0.5 mmol), corresponding aromatic aldehydes (1.0 mmol), and 3 mL of appropriate solvent in the presence of DABCO, with catalytic promotion and under microwave irradiation (MW), or subjected to a temperature of 0 °C when a reaction improvement was necessary. After that, the solvent was removed and the reaction media was directly filtered through silica gel, using hexane/ethyl acetate (7:3) as eluent. The reaction products were concentrated under reduced pressure (yields are shown in Table 1 and Table 2). Acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran-2-ylmethyl ester (10): FTIR (KBr) cm−1: 541, 777, 794, 954, 1062, 1188, 1298, 1406, 1633, 1718, 2944. RMN 1H (500 MHz; CDCl3) δ 1.835 (dd, 1H, J = 15 Hz); 2.08 (dd, 1H, J = 15 Hz); 2.33 (dt, 1H, J = 10 Hz, J = 5 Hz); 2.60 (dt, 1H, J = 10 Hz, J = 5 Hz); 3.99 (m, 1H); 4.31 (m, 1H); 5.1 (d, 1H, J = 10 Hz); 5.85 (dd, 1H, J = 10 Hz, J = 2.5 Hz); 6.16 (dd, 1H, J = 15 Hz, J = 10 Hz); 6.45 (dd, 1H, J = 15 Hz, J = 2.5 Hz); 7.48 (m, 3H); 7.62 (d, 1H, J = 5 Hz); 7.80 (d, 1H, J = 5 Hz); 7.86 (d, 1H, 10 Hz); 7.97 (d, 1H, J = 10 Hz). RMN 13C (125 MHz; CDCl3): δ 38.57; 42.70; 55.16; 66.38; 75.11; 75.82; 123.02; 123.31; 125.46; 125.55; 126.34; 128.06; 128.53; 129.93; 130.31; 131.32; 133.78; 136.04; 165.94. LC-MS-IT-TOF calculated for C19H20ClO3: 331.1095 [M + H]+; found: 331.1097. Acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (11): FTIR (KBr) cm−1: 455, 645, 800, 894, 955, 1230, 1411, 1540, 1643, 1704, 2849, 2926. RMN 1H (500 MHz; CDCl3) δ 0.94 (t, 3H, J = 10 Hz); δ 1.51 (m, 2H); δ 1.61 (m, 2H); δ 2.16 (m, 2H); δ 3.25 (m, 1H); δ 3.62 (m, 1H); δ 4.16 (dd, 1H, J = 15 Hz, 5 Hz); δ 4.21 (dd, 1H, J = 10 Hz, 5 Hz); δ 5.85 (dd, 1H, J = 10 Hz, 2.5 Hz); δ 6.16 (dd, 1H, J = 15 Hz, 10 Hz); δ 6.44 (dd, 1H, J = 15 Hz, 2.5 Hz). RMN 13C (125 MHz; CDCl3) δ 9.78; 28.63; 38.76; 41.76; 55.34; 66.43; 74.29; 78.24; 128.13; 131.19; 165.95. LC-MS-IT-TOF calculated for C11H19O3: 199.1329 [M + H]+; found: 199.1330. 2-[Hydroxy-(2-nitro-phenyl)-methyl]-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro- pyran-2- ylmethyl ester (8a): FTIR (KBr) cm−1: 781, 1051, 1136, 1159, 1265, 1301, 1348, 1446, 1525, 1720, 2927, 2960, 3448. RMN 1H (500 MHz; CDCl3) δ 1.14 (dd, 1H, J = 25 Hz, 10 Hz); δ 1.60 (m. 1H); 1.91 (ddd, 1H, J = 30 Hz, 25 Hz, 10 Hz); δ 2.08 (m, 1H); δ 2.49 (d, 1H, J = 10 Hz); δ 2.83 (d, 1H); δ 3.8 (m, 1H); δ 4.18 (m, 3H); δ 4.97 (dd, 1H, J = = 15 Hz, 10 Hz); δ 5.76 (d, 1H, J = 15 Hz); δ 6.08 (d, 1H, J = 10 Hz); δ 6.39 (d, 1H, J = 15 Hz); δ 7.18 (dt, 1H, J = 5 Hz); δ 7.41 (m, 5H); δ 7.55 (dd, 1H, J = 20 Hz, 10 Hz); δ 7.72 (m, 2H); δ 7.80 (m, 1H); δ 7.87 (t, 1H, J = 10 Hz). RMN 13C (125 MHz; CDCl3) δ 38.29; 38.47; 55.00; 66.79; 67.49; 74.80; 75.30; 122.84; 122.96; 123.33; 124.53; 124.62; 125.60; 126.23; 127.24; 128.43; 128.56; 128.79; 129.00; 133.47; 136.09; 137.17; 140.37; 140.45; 148.40; 165.50. LC-MS-IT-TOF calculated for C26H24ClNO6Na: 504.1184 [M + H]+; found: 504.1188. 2-[Hydroxy-(3-nitro-phenyl)-methyl]-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro- pyran-2- yl-methyl ester ( FTIR (KBr) cm−1: 781, 802, 1053, 1087, 1159, 1348, 1527, 1714, 2854, 2924, 3427, RMN 1H (500 MHz; CDCl3) δ 1.64 (q, 1H, J = 10 Hz); δ 1.95 (ddd, 1H, J = 25 Hz, 15 Hz, 5 Hz); δ 2.14 (m, 1H); δ 2.50 (d, 1H, J = 10 Hz); δ 3.85 (m, 1H); δ 4.20 (m, 3H); δ 5.00 (d, 1H, J = 10 Hz); δ 5.52 (d, 1H, J = 5 Hz); δ 5.85 (d, 1H, J = 10 Hz); δ 6.39 (s, 1H); δ 7.29 (dt, 1H, J = 10 Hz, 7.5 Hz); δ 7.41 (m, 3H); δ 7.50 (dd, 1H, J = 10 Hz, 5 Hz); δ 7.57 (dd, 1H, J = 20 Hz, 10 Hz); δ 7.73 (d, 1H, J = 10 Hz); δ 7.80 (dd, 1H, J = 5 Hz, 2.5 Hz); δ 7.88 (d, 1H, J = 5 Hz); δ 7.96 (m, 1H); δ 8.15 (d, 1H, J = 15 Hz). RMN 13C (125 MHz; CDCl3) δ 38.34; 42.71; 54.88; 66.84; 72.51; 74.86; 75.83; 121.49; 122.79; 123.26; 125.50; 125.66; 126.26; 127.88; 128.66; 129.06; 129.34; 130.26; 132.65; 133.81; 135.90; 140.89; 143.59; 148.31; 165.48. LC-MS-IT-TOF calculated for C26H24ClNO6Na: 504.1184 [M + H]+; found: 504.1188. 2-[Hydroxy-(4-nitro-phenyl)-methyl]-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran-2- ylmethyl ester (8c): FTIR (KBr) cm−1: 781, 854, 1053, 1159, 1263, 1346, 1521, 1604, 1720, 2926, 2960, 3450. RMN 1H (500 MHz; CDCl3) δ 1.16 (d, 1H, J = 10 Hz); δ 1.64. (q, 1H, J = 10 Hz); δ 1.96 (m, 1H); δ 2.14 (d, 1H, J = 15 Hz); δ 2.51 (d, 1H, J = 0 Hz); δ 3.84 (m, 1H); δ 4.20 (m, 3H); δ 5.00 (d, 1H, J = 10 Hz); δ 5.52 (d, 1H, J = 10 Hz); δ 5.83 (d, 1H, J = 10 Hz); δ 6.38 (s, 1H); δ 7.42 (m, 5H); δ 7.51 (d, 1H, J = 5 Hz); δ 7.75 (d, 1H, J = 5 Hz); δ 7.80 (m, 1H); δ 7.89 (m, 1H); δ 7.99 (dd, 2H, J = 10 Hz, 5 Hz). RMN 13C (125 MHz; CDCl3) δ 18.95; 38.30; 42.63; 54.87; 66.79; 72.51; 74.88; 75.84; 122.87; 123.27; 123.60; 125.49; 125.68; 126.28; 127.32; 127.79; 127.88; 128.73; 129.10; 130.28; 133.83; 133.85; 140.94; 147.44; 148.57; 165.46. LC-MS-IT-TOF calculated for C26H24ClNO6Na: 504.1184 [M + H]+; found: 504.1186. 2-(Hydroxy-pyridin-2-yl-methyl)-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran-2-yl methyl ester ( FTIR (KBr) cm−1: 781, 800, 958, 1064, 1159, 1247, 1375, 1438, 1593, 1720, 2926, 2958, 3057, 3394. RMN 1H (500 MHz; CDCl3) δ 1.18 (s, 1H); δ 1.66 (dd, 2H, J = 30 Hz, 10 Hz); δ 1.14 (d, 1H, J = 15 Hz); δ 2.50 (dt, 1H, J = 20 Hz, 5 Hz); δ 4.20 (m, 4H); δ 5.61 (d, 1H, J = 10 Hz); δ 6.00 (d, 1H, J = 10 Hz); δ 6.40 (d, 1H, J = 5 Hz); δ 6.97 (t, 1H, J = 10 Hz); δ 7.41 (m, 6H); δ 7.74 (d, 2H, J = 10 Hz); δ 7.79 (m, 1H); δ 7.90 (m, 1H). RMN 13C (125 MHz; CDCl3) δ 29.71; 38.41; 42.81; 55.04; 66.65; 71.37; 71.57; 74.94; 75.77; 121.86; 122.98; 123.40; 125.49; 125.67; 126.33; 128.53; 128.96; 130.25; 133.79; 136.17; 128.23; 141.01; 146.68; 158.86; 165.49. LC-MS-IT-TOF calculated for C25H24ClNO4Na: 438.1467 [M + H]+; found: 438.1469. 2-(Hydroxy-pyridin-3-yl-methyl)-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran-2-yl methyl ester (8e): FTIR (KBr) cm−1: 713, 781, 800, 848, 1058, 1157, 1261, 1375, 1425, 1597, 1624, 1720, 2856, 2960, 3055, 3294. RMN 1H (500 MHz; CDCl3) δ 1.26 (m, 1H); δ 1.71 (qua, 1H, J = 20 Hz); δ 2.04 (m, 1H); δ 2.19 (m, 1H); δ 2.58 (dt, 1H, J = 25 Hz, 5 Hz); δ 3.90 (t, 1H, J = 15 Hz); δ 4.24 (m, 3H); δ 5.06 (dd, 1H, J = 20 Hz); δ 5.57 (s, 1H); δ 5.96 (d, 1H, J = 5 Hz); δ 6.45 (s, 1H); δ 7.12 (m, 1H); δ 7.48 (m, 3H); δ 7.58 (d, 1H); δ 7.66 (t, 1H, J = 20 Hz); δ 7.82 (m, 2H); δ 7.96 (d, 1H, J = 15 Hz); δ 8.40 (m, 1H); δ 8.55 (s, 1H). RMN 13C (125 MHz; CDCl3) δ 38.57; 42.88; 55.12; 66.87; 71.10; 75.07; 75.97; 123.09; 123.46; 123.62; 125.68; 125.81; 126.40; 127.33; 128.76; 129.19; 130.44; 133.96; 134.74; 136.14; 137.36; 141.44; 148.38; 148.90; 165.67. LC-MS-IT-TOF calculated for C25H24ClNO4Na: 438.1467 [M + H]+; found: 438.1470. 2-(Hydroxy-pyridin-4-yl-methyl)-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran-2-yl methyl ester (8f): FTIR (KBr) cm−1: 781, 800, 1066, 1178, 1244, 1373, 1448, 1598, 1734, 2854, 2958, 3053, 3332. RMN 1H (500 MHz; CDCl3) Despite the spectrum does not provide enough resolution to demonstrate the integration of the peaks we can observe the presence of the olefinic and carbinolic hydrogens signals characterizing the C-C bond formation in Morita-Baylis-Hillman reaction step. δ 5.42 (d, 1H, J = 5 Hz); δ 5.83 (d, 1H, 10 Hz); δ 6.38 (s, 1H). RMN 13C (125 MHz; CDCl3) δ 13.24; 24.06; 38.16; 41.31; 42.66; 48.44; 54.83; 65.68; 67.21; 74.72; 75.72; 121.36; 122.75; 122.83; 123.31; 125.53; 125.67; 126.26; 128.53; 128.62; 129.07; 150.85; 159.84. LC-MS-IT-TOF calculated for C25H24ClNO4Na: 438.1467 [M + H]+; found: 438.1470. 2-(Hydroxy-naphthalen-2-yl-methyl)-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran -2-ylmethyl ester (8g): FTIR (KBr) cm−1: 474, 553, 746, 772, 956, 1034, 1139, 1252, 1507, 1621, 1708, 2847, 2926, 2952, 3057, 3425. RMN 1H (500 MHz; CDCl3) δ 1.62 (ddd, 1H, J = 20 Hz, 10 Hz, 5 Hz); δ 1.90 (qui, 1H, J = 10 Hz); δ 2.07 (m, 1H); δ 2.47 (d, 1H, J = 15 Hz); δ 2.82 (d, 1H); δ 3.77 (m, 1H); δ 4.10 (m, 1H); δ 4.15 (dd, 1H, J = 10 Hz, 5 Hz); δ 4.18 (m, 1H); δ 4.95 (m, 1H); δ 5.66 (s, 1H); δ 5.87 (d, 1H, J = 2.5 Hz); δ 6.39 (s, 1H); δ 7.39 (m, 7H); δ 7.71 (m, 6H); δ 7.80 (d, 1H, J = 5 Hz); δ 7.86 (d, 1H, J = 10 Hz). RMN 13C (125 MHz; CDCl3) δ 29.72; 38.39; 42.65; 54.95; 66.57; 73.30; 74.95; 75.80; 122.93; 122.98; 123.96; 124.57; 125.50; 125.60; 126.07; 126.19; 127.03; 127.68; 128.09; 128.29; 128.55; 129.00; 130.26; 133.02; 133.20; 133.80; 135.98; 138.60; 141.70; 165.95. LC-MS-IT-TOF calculated for C30H27ClO4Na: 509.1490 [M + H]+; found: 509.1492. 2-[(4-Bromo-phenyl)-hydroxy-methyl]-acrylic acid 4-chloro-6-naphthalen-1-yl-tetrahydro-pyran -2-ylmethyl ester (8h): FTIR (KBr) cm−1: 550, 728, 771, 797, 950, 1009, 1034, 1137, 1265, 1299, 1401, 1503, 1630, 1707, 2856, 2925, 3435. RMN 1H (500 MHz; CDCl3) δ 1.63 (dd, 1H, J 30 Hz, 10 Hz); δ 1.93 (m, 1H); δ 2.09 (dd, 1H, J = 20 Hz, 5 Hz); δ 2.48 (dt, 1H, J 15 Hz, 5 Hz); δ 3.76 (qui, 1H); δ 4.15 (m, 3H); δ 4.95 (d, 1H, J = 10 Hz); δ 5.37 (s, 1H); δ 5.76 (d, 1H, J = 10 Hz); δ 6.30 (s, 1H); δ 7.90 (t, 2H, J = 10 Hz); δ 7.27 (m, 2H); δ 7.39 (m, 3H); δ 7.49 (d, 1H, J = 10 Hz); δ 7.72 (d, 1H, J = 10 Hz); δ 7.79 (m, 1H); δ 7.86 (d, 1H, J = 15 Hz) RMN 13C (125 MHz; CDCl3) δ 38.35; 42.70; 54.99; 66.64; 72.58; 74.94; 75.84; 121.82; 122.98; 123.33; 125.53; 125.67; 126.27; 126.97; 127.07; 128.36; 128.65; 129.07; 130.30; 131.57; 133.83; 135.99; 140.35; 141.48; 165.75. LC-MS-IT-TOF calculated for C26H24BrClO4Na: 537.0439 [M + H]+; found: 537.0442. 2-[Hydroxy-(2-nitro-phenyl)-methyl]-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9a): FTIR (KBr) cm−1: 752, 786, 1037, 1145, 1267, 1350, 1527, 1633, 1720, 2875, 2933, 2962, 3448. RMN 1H (500 MHz; CDCl3) δ 0.84 (t, 2H, J 15 Hz); δ 1.42 (m, 6H); δ 2.06 (m, 1H); δ 3.14 (m, 1H); δ 3.90 (m, 1H); δ 4.04 (d, 2H, J = 15 Hz); δ 5.68 (d, 1H, J = 15 Hz); δ 6.11 (d, 1H, J = 10 Hz); δ 6.36 (s, 1H); δ 7.40 (t, 1H, J = 15 Hz); δ 7.58 (t, 1H, J = 15 Hz); δ 7.65 (m, 1H); δ 7.89 (ddd, 1H, J = 15 Hz, 10 Hz, 2.5 Hz). RMN 13C (125 MHz; CDCl3) δ 9.71; 28.53; 38.58; 41.66; 55.10; 66.73; 67.63; 73.97; 78.22; 124.58; 127.16; 128.87; 133.49; 136.04; 140.53; 148.34; 165.41. LC-MS-IT-TOF calculated for C18H24NO6: 350.1598 [M + H]+; found: 350.1602. 2-[Hydroxy-(3-nitro-phenyl)-methyl]-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9b): FTIR (KBr) cm−1: 740, 812, 962, 1047, 1147, 1350, 1529, 1624, 1658, 1722, 2873, 2931, 2962, 3427. RMN 1H (500 MHz; CDCl3) δ 0.85 (t, 3H, J = 15 Hz); δ 1.43 (m, 4H); δ 2.07 (m, 1H); δ 3.17 (m, 1H); δ 3.49 (m, 1H); δ 3.91 (m, 1H); δ 4.06 (m, 2H); δ 5.56 (s, 1H); δ 5.84 (d, 1H, J = 10 Hz); δ 6.39 (d, 1H, J = 10 Hz); δ 7.46 (t, 1H, J = 20 Hz); δ 7.66 (t, 1H, J = 10 Hz); δ 8.07 (d, 1H, J = 15 Hz); δ 8.19 (s, 1H). RMN 13C (125 MHz; CDCl3) δ 9.70; 28.55; 38.39; 41.58; 54.92; 66.79; 72.65; 73.89; 78.20; 121.46; 122.78; 127.88; 129.34; 132.52; 140.81; 143.70; 148.33; 165.32. LC-MS-IT-TOF calculated for C18H24NO6: 350.1598 [M + H]+; found: 350.16012. 2-[Hydroxy-(4-nitro-phenyl)-methyl]-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9c): FTIR (KBr) cm−1: 754, 829, 854, 962, 1047, 1147, 1265, 1348, 1521, 1604, 1631, 1720, 2875, 2935, 2964, 3462. RMN 1H (500 MHz; CDCl3) δ 0.92 (t, 3H, J = 10 Hz); δ 1.51 (m, 5H); δ 2.05 (m, 1H); δ 2.15 (dt, 1H, J = 15 Hz, 5 Hz); δ 3.23 (m, 1H); δ 3.55 (m, 1H); δ 3.985 (m, 1H); δ 4.15 (d, 2H, J = 10 Hz); δ 5.64 (d, 1H, J = 5 Hz); δ 5.90 (d, 2H, J = 15 Hz); δ 6.46 (d, 1H, J = 5 Hz); δ 7.58 (dd, 2H, J = 10 Hz, 2.5 Hz); δ 8.20 (d, 2H, J = 10 Hz). RMN 13C (125 MHz; CDCl3) δ 9.71; 28.57; 38.38; 41.59; 54.93; 66.78; 72.65; 73.98; 78.23; 123.62; 127.38; 127.79; 127.94; 140.91; 147.46; 148.61; 148.73; 165.37. LC-MS-IT-TOF calculated for C18H24NO6: 350.1598 [M + H]+; found: 350.15995. 2-(Hydroxy-pyridin-2-yl-methyl)-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9d): FTIR (KBr) cm−1: 754, 960, 1006, 1045, 1062, 1147, 1267, 1382, 1436, 1593, 1635, 1720, 2875, 2933, 2962, 3392. RMN 1H (500 MHz; CDCl3) δ 0.84 (t, 3H, J = 10 Hz); δ 1.44 (m, 5H); δ 1.95 (m, 1H); δ 2.07 (dt, 1H, J = 15 Hz, 2.5 Hz); δ 3.14 (qui, 1H, J = 7.5 Hz); δ 3.46 (t, 1H, J = 7.5 Hz); δ 3.91 (qui, 1H, J = 5 Hz, 10 Hz); δ 4.06 (m, 2H); δ 5.55 (s, 1H); δ 5.93 (s, 1H); δ 6.34 (s, 1H); δ 7.16 (t, 1H, J = 7.5 Hz); δ 7.37 (t, 1H, J = 10 Hz); δ 7.61 (t, 1H, J = 10 Hz); δ 8.48 (d, 1H, J = 5 Hz). RMN 13C (125 MHz; CDCl3) δ 9.72; 28.57; 38.65; 41.68; 55.19; 66.53; 72.20; 74.08; 78.15; 121.23; 122.71; 127.50; 136.87; 141.53; 148.22; 159.36; 165.68. LC-MS-IT-TOF calculated for C17H24NO4: 306.1700 [M + H]+; found: 306.17010. 2-(Hydroxy-pyridin-3-yl-methyl)-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9e): FTIR (KBr) cm−1: 713, 758, 813, 848, 960, 1058, 1147, 1263, 1327, 1377, 1425, 1460, 1624, 1633, 1720, 2875, 2933, 2962, 3332. RMN 1H (500 MHz; CDCl3) δ 0.84 (t, 3H, J = 15 Hz); 1.43 (m, 4H); 1.94 (m, 1H); 2.07 (dt, 1H, J = 25 Hz, 5 Hz); 3.15 (m, 1H); 3.45 (m, 1H); 3.91 (m, 1H); 4.06 (m, 2H); 5.53 (s, 1H); 5.88 (d, 1H, J = 10 Hz); 6.37 (s, 1H); 7.20 (t, 1H, J = 10 Hz); 7.66 (dd, 1H, J = 15 Hz, 2.5 Hz); 8.40 (dd, 1H, J = 10 Hz, 2.5 Hz); 8.48 (s, 1H). RMN 13C (125 MHz; CDCl3) δ 9.72; 28.55; 38.49; 41.59; 55.02; 66.65; 70.93; 73.98; 78.16; 123.40; 127.00; 134.44; 137.14; 141.41; 148.34; 148.83; 165.40. LC-MS-IT-TOF calculated for C17H24NO4: 306.1700 [M + H]+; found: 306.17011. 2-(Hydroxy-pyridin-4-yl-methyl)-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9f): FTIR (KBr) cm−1: 758, 873, 1041, 1089, 1149, 1259, 1377, 1409, 1458, 1602, 1635, 1735, 2852, 2927, 2962, 3392. RMN 1H (500 MHz; CDCl3) Despite the spectrum does not provide enough resolution to demonstrate the integration of the peaks we can observe the presence of the olefinic and carbinolic hydrogens signals characterizing the C-C bond formation in Morita-Baylis-Hillman reaction step. δ 5.48 (d, 1H, J = 5 Hz); δ 5.84 (d, 1H, J = 10 Hz); δ 6.38 (d, 1H, J = 5 Hz). RMN 13C (125 MHz; CDCl3) δ 9.81; 13.25; 28.58; 38.28; 41.61; 48.43; 54.99; 55.59; 65.60; 67.31; 73.91; 78.23; 121.47; 141.95; 150.95; 169.81. LC-MS-IT-TOF calculated for C17H24NO4: 306.1700 [M + H]+; found: 306.17006. 2-(Hydroxy-naphthalen-2-yl-methyl)-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9g): FTIR (KBr) cm−1: 752, 819, 962, 1045, 1147, 1269, 1382, 1462, 1631, 1658, 1718, 2852, 2927, 2962, 3427. RMN 1H (500 MHz; CDCl3) δ 0.81 (t, 3H, J = 5 Hz); δ 1.35 (m, 3H); δ 1.45 (m, 1H); δ 1.87 (m, 1H); δ 1.99 (d, 1H); δ 3.06 (m, 1H); δ 3.37 (m, 1H); δ 3.78 (m, 1H); δ 4.01 (m, 2H); δ 5.635 (d, 1H); δ 5.81 (d, 1H); δ 6.35 (d, 1H); δ 7.39 (m, 3H); δ 7.75 (dd, 4H, J = 10 Hz); RMN 13C (125 MHz; CDCl3) δ 9.78; 28.59; 38.52; 41.63; 55.10; 66.58; 73.34; 74.06; 78.18; 124.60; 125.51; 126.10; 126.23; 127.02; 127.73; 128.12; 128.28; 133.05; 133.24; 138.68; 141.80; 165.89. LC-MS-IT-TOF calculated for C22H26O4Na: 377.1723 [M + H]+; found: 377.17258. 2-[(4-Bromo-phenyl)-hydroxy-methyl]-acrylic acid 6-ethyl-tetrahydro-pyran-2-ylmethyl ester (9h): FTIR (KBr) cm−1: 759, 817, 875, 962, 1014, 1045, 1070, 1147, 1271, 1382, 1404, 1460, 1631, 1656, 1716, 2852, 2927, 2962, 2448. RMN 1H (500 MHz; CDCl3) δ 0.83 (t, 3H, J = 10 Hz); δ 1.37 (m, 3H); δ 1.48 (dt, 1H, J = 25 Hz, 10 Hz); δ 1.93 (t, 1H, J = 10 Hz); δ 2.05 (d, 1H, J = 15 Hz); δ 3.12 (m, 1H); 3.43 (m, 1H); δ 3.89 (m, 1H); δ 4.04 (m, 2H); δ 5.41 (d, 1H, J = 10 Hz); δ 5.74 (d, 1H, J = 10 Hz); δ 6.30 (d, 1H); δ 7.17 (dd, 1H, J = 7.5 Hz); δ 7.38 (d, 1H, J = 7.5 Hz). RMN 13C (125 MHz; CDCl3) δ 9.78; 28.63; 38.52; 41.66; 55.08; 66.66; 72.77; 72.87; 74.03; 78.23; 121.81; 127.07; 127.11; 128.32; 131.57; 140.29; 140.40; 141.41; 141.52; 165.68. LC-MS-IT-TOF calculated for C18H23BrO4Na: 405.0672 [M + H]+; found: 405.06756.

3.5. Biology

3.5.1. Leishmania Culture

Leishmania (Leishmania) donovani (MHOM/ET/1967/HU3) was provided by Oswaldo Cruz Institute Leishmania Collection-Fiocruz-RJ-Brazil. Promastigotes were maintained in vitro at 26 °C in Schneider’s medium, pH 7 (20% heat-inactivated fetal bovine serum (FBS), 100 U/mL penicillin, 100 mg/mL streptomycin, and 2% of male urine), as previously described [29].

3.5.2. Effect of Morita-Baylis-Hillman Adduct in Promastigotes of Leishmania donovani

Briefly, promastigotes in the logarithmic growth phase were cultured in 96-well cell culture plates at 1 × 106 parasites per well in 100 mL of Schneider's medium with increasing concentrations of 3.12, 6.25, 12.5, 25, 50, 100, 200, and 400 µg/mL of Morita-Baylis-Hillman adduct. The plates were incubated for 72 h in a biological oxygen demand (B.O.D.) incubator at 26 °C. Cytotoxicity to promastigotes was evaluated by the 3-(4,5-dimethyl-2-thiazole)-2,5-diphenyltetrazolium bromide (MTT) colorimetric assay as described by Valadares et al. [30].The absorbance was measured using an ELISA plate reader (ELx800, BIOTEK) at 540 nm. Amphotericin® was used as a positive control. The viability of promastigotes incubated in the presence of different concentrations of adducts was determined by comparing to a culture control (L. donovani cultivated in Schneider only). The concentration that caused a 50% reduction in cell viability (IC50) was calculated by Probit analysis (SPSS 13.0 for Windows). Each experiment was performed in duplicate and repeated at least three times. Haemolytic assays (HC50 > 400 μg·L–1) towards human red blood cells were performed as described in the literature [30].

4. Conclusions

The synthesis of the sixteen new hybrids was done in two steps in moderate to very good yields, through the reaction of MBHAs with tetrahydropyran acrylates and aromatic aldehydes. Studies of the variation of reaction conditions, such as the use of microwaves promoting the reaction at 80 °C, use of low temperature, protic or aprotic solvents, and the use of phenol as additives were used satisfactorily based on the knowledge of MBHR reaction mechanisms. The success of the biological results of leishmanicidal activities and high indices of selectivities of several hybrids, especially those which present a bromine atom in the aromatic structure (SIrb > 180.19) higher than the reference drug Amphotericin B (SIrb = 33.05), which presents high toxicity, indicate that our proposal that hybridization of opioid analgesic tetrahydropyrans with MBHA was a good strategy. This also shows a good possibility to obtain new leishmanicidal drugs against Leishmania donovani ssp.
  23 in total

Review 1.  Recent contributions from the Baylis-Hillman reaction to organic chemistry.

Authors:  Deevi Basavaiah; Bhavanam Sekhara Reddy; Satpal Singh Badsara
Journal:  Chem Rev       Date:  2010-09-08       Impact factor: 60.622

2.  High analgesic and anti-inflammatory in vivo activities of six new hybrids NSAIAs tetrahydropyran derivatives.

Authors:  Saulo L Capim; Gabriela M Gonçalves; Gabriela C M Dos Santos; Bruno G Marinho; Mário L A A Vasconcellos
Journal:  Bioorg Med Chem       Date:  2013-07-29       Impact factor: 3.641

Review 3.  Neglected tropical diseases.

Authors:  Nick Feasey; Mark Wansbrough-Jones; David C W Mabey; Anthony W Solomon
Journal:  Br Med Bull       Date:  2009-12-10       Impact factor: 4.291

4.  Leishmanicidal activity of the Agaricus blazei Murill in different Leishmania species.

Authors:  Diogo G Valadares; Mariana C Duarte; Jamil S Oliveira; Miguel A Chávez-Fumagalli; Vivian T Martins; Lourena E Costa; João Paulo V Leite; Marcelo M Santoro; Wiliam C B Régis; Carlos A P Tavares; Eduardo A F Coelho
Journal:  Parasitol Int       Date:  2011-06-24       Impact factor: 2.230

5.  Design, Prins-cyclization reaction promoting diastereoselective synthesis of 10 new tetrahydropyran derivatives and in vivo antinociceptive evaluations.

Authors:  Saulo L Capim; Paulo H P Carneiro; Paloma C Castro; Maithê R M Barros; Bruno G Marinho; Mário L A A Vasconcellos
Journal:  Eur J Med Chem       Date:  2012-10-05       Impact factor: 6.514

6.  Design, synthesis and antileishmanial in vitro activity of new series of chalcones-like compounds: a molecular hybridization approach.

Authors:  Ticiano P Barbosa; Suervy C O Sousa; Francianne M Amorim; Yara K S Rodrigues; Priscilla A C de Assis; John P A Caldas; Márcia R Oliveira; Mário L A A Vasconcellos
Journal:  Bioorg Med Chem       Date:  2011-06-01       Impact factor: 3.641

7.  Efficient synthesis of 16 aromatic Morita-Baylis-Hillman adducts: Biological evaluation on Leishmania amazonensis and Leishmania chagasi.

Authors:  Cláudio G L Junior; Priscila A C de Assis; Fábio P L Silva; Suervy C O Sousa; Natália G de Andrade; Ticiano P Barbosa; Patrícia L N Nerís; Luiz V G Segundo; Italo C Anjos; Gabriel A U Carvalho; Gerd B Rocha; Márcia R Oliveira; Mário L A A Vasconcellos
Journal:  Bioorg Chem       Date:  2010-09-19       Impact factor: 5.275

8.  A new interpretation of the Baylis-Hillman mechanism.

Authors:  Kristin E Price; Steven J Broadwater; Brian J Walker; D Tyler McQuade
Journal:  J Org Chem       Date:  2005-05-13       Impact factor: 4.354

9.  A case study of the mechanism of alcohol-mediated Morita Baylis-Hillman reactions. The importance of experimental observations.

Authors:  R Erik Plata; Daniel A Singleton
Journal:  J Am Chem Soc       Date:  2015-03-13       Impact factor: 15.419

10.  Synthesis and In Vitro Anti Leishmania amazonensis Biological Screening of Morita-Baylis-Hillman Adducts Prepared from Eugenol, Thymol and Carvacrol.

Authors:  Francisco José Seixas Xavier; Klinger Antonio da Franca Rodrigues; Ramon Guerra de Oliveira; Claudio Gabriel Lima Junior; Juliana da Câmara Rocha; Tatjana Souza Lima Keesen; Marcia Rosa de Oliveira; Fábio Pedrosa Lins Silva; Mário Luiz Araújo de Almeida Vasconcellos
Journal:  Molecules       Date:  2016-11-08       Impact factor: 4.411

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.